WRT54G ver.6 Admin page not available

Hi, Two days ago I saw on linksys website new firmware and decided to upgrade.I guess the installation went wrong, and my router WRT54G ver.6 ended up faulty. The problem is that I cannot access the router's Admin page (http://192.168.1.1), the browser gives me message "connection interrupted - The connection to the server was reset while the page was loading." The power light on the router when it starts is steady, no blinking. I can ping the router and as far as I can see it's fully functional in its default mode. I can access internet via cable and wifi. The ssid is Linksys.
I tried all kinds of hard reset, I guess evertything I could find on your forum.
Is there hope for my router or is it "Bricked"?
Thanks for your Help
S...

Hard reset your router -
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Also make sure that your computer is set to 'Obtain IP Address Automatically' , disable any firewalls, security softwares on the computer before trying to access the setup page...
If it does not work try connecting a different computer/laptop to the router's ethernet port and see if you can open the setup page...

Similar Messages

Page not available error

Hello,
I created the Role, Page and added the VC model from VC. When deploying, I could see the portal application, but when assigning the Role created in VC to the user and testing with that user credentials, it gives an error "Page not available"???
Any ideas what is missing??
Many thanks,
Dharmi

Hi Govindu,
Thank you for your reply.
Yes, that is the way I have done. I have created a role in VC (Sales), (runtime portal) then added a page to it (runtime also portal), and to that page I have added the composite view (runtime Web Dynpro). I do see the page, when I run it form VC but not after assignment to user?!?!?!
Then I have assigned the Sales role to the user.
Any more ideas???
Best regards,
Dharmi
Edited by: Dharmi Tanna on Mar 10, 2008 8:59 AM

The requested resource (/Admin) is not available.

Hello ,
I am developing one small project. I am using struts,EJB and Hibernate to develop this project.
My project name is Admin. It has two sub-modules:- AdminWeb and AdminEJB.
In the sub-module AdminWeb, i am writing all the struts related stuff like Action classes,form bean classes, I have struts-config inside WEB-INF folder along with web.xml and other tlds. From the action class i am takinf the lookup of session bean which is in the another sub-module name as AdminEJB. and invoking the business method from of that bean class.
In the sub-module AdminEJB, I wrote all my Home Interface, Remote Interface and Session Bean class.From the session bean class i am firing a HQL query to interact with Database. I create Hibernate.cfg.xml and also mapping xml file needed to map with the database.Then i created ejb-jar.xml file.
I created EAR file name as Admin. And deployed in My JBoss server.
Now when i am running my project from web browser. then the following message is coming on the screen:-
The requested resource (/Admin) is not available.
Can anyone help me plz to recitify this problem.
Thanks with regard,
sanjay Kumar

Hello Again ,
The below the stack
16:13:59,189 INFO [StdSchedulerFactory] Quartz scheduler version: 1.5.2
16:13:59,189 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started.
16:14:00,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS'
16:14:01,017 INFO [A] Bound to JNDI name: queue/A
16:14:01,017 INFO Bound to JNDI name: queue/B
16:14:01,033 INFO [C] Bound to JNDI name: queue/C
16:14:01,033 INFO [D] Bound to JNDI name: queue/D
16:14:01,033 INFO [ex] Bound to JNDI name: queue/ex
16:14:01,064 INFO [testTopic] Bound to JNDI name: topic/testTopic
16:14:01,064 INFO [securedTopic] Bound to JNDI name: topic/securedTopic
16:14:01,064 INFO [testDurableTopic] Bound to JNDI name: topic/testDurableTopic
16:14:01,064 INFO [testQueue] Bound to JNDI name: queue/testQueue
16:14:01,142 INFO [UILServerILService] JBossMQ UIL service available at : /127.0.0.1:8093
16:14:01,189 INFO [DLQ] Bound to JNDI name: queue/DLQ
16:14:01,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA'
16:14:01,611 INFO [WrapperDataSourceService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=MyOracleDS' to JNDI name 'MyOracleDS'
16:14:01,705 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../deploy/jmx-console.war/
16:14:03,220 INFO [EARDeployer] Init J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:22,250 INFO [EjbModule] Deploying DiscountDetailBean
16:14:22,688 INFO [ProxyFactory] Bound EJB Home 'DiscountDetailBean' to jndi 'Holiday_Cottage_Group/AdminEjb/ejbModule/com/discountEjbs/InsertDiscountDetailHome'
16:14:22,688 INFO [EJBDeployer] Deployed: file:/E:/jboss-4.2.1/server/default/tmp/deploy/tmp62976Admin.ear-contents/AdminEJB.jar
16:14:22,719 INFO [TomcatDeployer] deploy, ctxPath=/AdminWeb, warUrl=.../tmp/deploy/tmp62976Admin.ear-contents/AdminWeb-exp.war/
16:14:22,891 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\javax.servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:22,922 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\servlet-api.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:23,578 INFO [EARDeployer] Started J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:23,719 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080
16:14:23,750 INFO [AjpProtocol] Starting Coyote AJP/1.3 on ajp-127.0.0.1-8009
16:14:23,766 INFO [Server] JBoss (MX MicroKernel) [4.2.1.GA (build: SVNTag=JBoss_4_2_1_GA date=200707131605)] Started in 50s:810ms
Thanks with regards,
Sanjay Kumar

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

AirPort Utility 5.5.3 for Windows - Support - Apple works fine for me as well as a test.

Page not available issue

Recently, I have come across an issue where I attempt
enter the Communities on the support page and come up with
a page not available message when using Safari. If I open
Chrome or Firefox things work normally. If I empty cache in Safari
close it, then reopen, everything is fine. It doesn't happen all the time,
but enough to be annoying.
Anyone else with this issue?

Sure enough. This happened to me the other day. I am running Mac OS X 10.5.8, Safari 5.0.3. After hearing other reports of this, I tried in Firefox and was able to get to the main Discussions page there.
I went back to Safari and opened Safari Preferences > Security > Show Cookies and performed a search for Discussions. I only needed to delete that one cookie to get back to normal in Apple Discussions. A bit of a pain, but Safari is my favorite browser, so unless it happens repeatedly (which it hasn't, knock wood), I won't be changing browsers.

Unity Connection Admin Page Not Loading

Cisco Unity Connection version: 8.5.1ES16.11900-16
Running HA.
My publisher's gui loads just fine. However if I try to load the subs i get the servers error page:
HTTP Status 404 -
type: Status report
message:
description: The requested resource () is not available.
Also when I go to services on the admin page and drop the menu down to that server I get no available. In the cluster menu I see the server defined.
I can SSH into the box and the servcies appear to be running just fine. Is there a way to tell why the admin page is not loading?

Have you tried restarting the Tomcat service on the secondary server? This can be done via the CLI.
     utils service restart Cisco Tomcat
HTH
Adam

Web service is running but Server Admin says "Not available"

Hello,
I cannot configure the web service using the Server Admin tool any more. The service is running and showing no error, but the "Web" icon in the "Computer & Services" panel of Server Admin is showing dark grey color. The Overview tab of the Web Service is stating: "Web Service is: Not available"
Any ideas what I can do to get it work again?
sudo apachectl configtest gave no errors or warnings.
Mac OS X (10.4.7)

You should not be logging in as root, despite what anyone has told you.
And the entire mechanism of OS X Server (and most other *nix OS-en), is meant for you to not be logged in as root.
Use sudo and/or authenticate in the GUI when/where needed.
Please try Wesley's advise here:
http://discussions.apple.com/thread.jspa?messageID=2862670
Try launching apache manually, and watch your logs
Ie:
in one terminal window, type:
tail -f /var/log/httpd/error_log
make a new Terminal window and type:
sudo apachectl start

Oracle XE production : web admin pages not localized

Hi,
I've just installed the production release (OracleXE latin1) on a french windows XP SP2. The product runs fine but the web admin pages and documentation are in english. The entries in the "start" menu are localized.
When I tested the last beta I noticed that the web admin pages were localized.
Is this an installation issue or a product issue ?
Thanks,
Jérôme

Hi Jérôme,
the announcement says:
Oracle Database 10g Express (Western European) Edition - Single-byte LATIN1 database for Western European language storage, with the Database Homepage user interface in English only.
Oracle Database 10g Express (Universal) Edition - Multi-byte Unicode database for all language deployment, with the Database Homepage user interface available in the following languages: Brazilian Portuguese, Chinese (Simplified and Traditional), English, French, German, Italian, Japanese, Korean and Spanish.
Thus you would need the Universal Edition for having a French user interface.
~Dietmar.

"Capture Pages" not available

Hi, I'm new to Pages (version 1). I'm trying to use "Capture Pages" after I've added all the necessary objects to my page, but I notice that "Capture Pages" is sometimes available, and sometimes not. Nothing I do seems to bring it back. If I create a new document from one of the templates, "Capture Pages" is available, but as soon as I select any element on the page, this feature is no longer highlighted. And it's the same even if I deselect any objects I've clicked. I've tried this on two different macs, one running the full version of the software, the other the trial version, with the same frustrating results. Can anyone help?

Yeah, that drives me crazy. I NEVER use main text body space. I design completely with text box objects. After I add a full page bleed of a filled square box object, I can no longer select the main body text space Pages uses, unless I make it a part of the master object and on and on. It's a total pain.
Getting a section break inserted is impossible when I'm using a group of text objects that fill up a whole page unless I get into a habit of moving boxes this way and that, and scatter them to reveal that cursed main body space. Then I forget I have a series of quasi-transparent object layers showing through from in behind and....sigh
I think I'll have to save up and buy InDesign because Pages is so main text space dependent. It's truly not a canvas, but an embedded text box permanently anchored to the page. If you're not using a template or writing plain vanilla text, it's a nightmare to work with.
Or is there something procedural I have yet to understand? Veterans, please enlighten me?

Download pages not available

I'm trying to download PC Suite 7.1 and both the Canadian and U.S. download pages return Error 404 (Page not found). Here's the U.S. URL that fails: http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_7_1_26_0_eng_us_web.exe
Is this available from another site?
Solved!
Go to Solution.

No idea but the pcsuite site is quite busy and I'm sure it wil be spotted and fixed soon.

UCCE 9.0.1 CCE Admin Page not working

I have UCCE 9.0.1 and everything works fine except the cce web admin page. I manage to configure attributes and precision queues using cce admin page. But when I am trying to assign the attributes to an agent by clicking agent name, the page freeze by showing the "loading.... " message.
Anyone know how to resolve this .

There is a known bug on PCCE and UCCE when using the cceadmin page and having it timeout.
Please find in the following readme bug number CSCue95184.
(http://www.cisco.com/web/software/280840583/103560/Release_Document_1.html)
To resolve this issue you will need to apply ICM9.0.3_ES3 or later update.
(http://software.cisco.com/download/special/release.html?config=5ee578cbacd86d9ff938f48c3034e5a3)
**Note – although this defect is listed as PCCE, the component is shared between both PCCE & UCCE.
Yesterday installed 9.0.4 version - problem resolved.

Oracle Rule Author admin pages not showing up

I installed the Oracle, Oracle application server and Oracle SOA Suite and was going through the SOA Order booking application but am currently stuck on the Rule Author. I bring up the admin page:
http://localhost:8888/ruleauthor
I log in and it displays a blank page.
Anyone have an idea what is going on?

I haven't seen this before. Could you provide some details on what options you installed SOA with and what browser you are using?

Muse created index page not available on BC

I'm creating a website on Muse and have published it as a temporary file to BC. All pages, files, images, etc. are there except for my index page! I have published and re-published multiple times and still can't find it on my page list. Another strange thing is there are no site management features, (i.e., modules, templates, etc) to use on my admin panel. I would really appreciate any help for the community.
Thank you!

I'm not sure why you would think I don't have access to that. I'm an Adobe Cloud member and as such I can process five websites through BC. Anyway, I've already used the BC admin panel for a couple of sites I was fooling around with in order to get the hang of things. The other two, as the one I'm writing about, were also created in Muse and published as temporary sites on BC. This is the site address: http://sassanoassociates.businesscatalyst.com/
Here is the admin panel link: http://sassanoassociates.businesscatalyst.com/AdminConsoleXT/#dashboard
I intend on publishing the site through BC as I have a right to do.
As for my questions, there are three issues now with this one site.
1. The index (home) page is not publishing from Muse to BC - the others are.
2. There is no way to access the site management elements such as 'content holders' and 'module templates'.
3. Having problem with the 'Services' page. It was working ok until I added some html blocks (in Muse).
I'm very frustrated as I have attempted to find answers to these problems to no avail. I realize that I am probably not doing something or should have done something in order to make this work, however, I'm not new at designing sites and it's very difficult when working with a new platform to not be able to find answers.
I have committed to publishing this site within a week for my client. I would really appreciate some guidence with this situation as quickly as possible.
I'm pasting a copy of one of the other sites which I created exactly the same way and has all the management elements and features right there. I need my admin panel for the site in question to look like that!!
My account email is [email protected]
Thanks.

Upgrade to ver 1.6 pages not displayed properly in Firefox

Hi,
I upgraded HTML DB to Ver. 1.6 today. The installation was okay, did not raise any errors, but when I use Firefox to log on to HTML DB, the pages are not displayed properly. IE is able to resolve the pages correctly.
Do I need to get a plug-in for Firefox? Ver. 1.5 was working perfectly with Firefox.
TIA

My design view won't display properly in Mozilla or IE. The images show. The CSS (core and flow) are found according to the access logs. But it doesn't display nicely at all. This was an upgrade from 1.5 to 1.6. 1.5 looked fine. My old applications from 1.5 display properly.

Cover page not available

Hello all,
In the sections area of my pages, there are no different style of templates available other than a blank and a text page. No cover page or table of content sections available which is weird because it is mentioned in the PDF and video tutorials. Do you think I purchased a faulty version?
I am very new at this, so I would appreciate some input.
Thank you very much
Ahu

Open the Template chooser. File > New from Template chooser. Look at the left grey column! you probably have selected Blank. Select something else or all.

WRT54G ver.6 Admin page not available

Similar Messages

Maybe you are looking for