WRT54G ver. 6 Connected to access point and internet, but cannot access the web
I can connect to the access point and it shows that I an connected to the internet. However when I open a bowser it says page cannot be displayed! Signal is very good to excellent. Also, I have been using it all day and it was working fine, until I shutdown. When I booted back up it stopped working. The internet is working! I have XBOX Live working right now. Just not the computer. Any Help would be appreciated.
WRT54G ver. 6
Message Edited by SJohnson4 on 12-01-200607:35 PM
Hi... it seems that your Wireless adapter on does get a IP address or DNS no after reboot. Try assigning a Static IP address and DNS on the Wireless Adapter. Also try to update the drivers for that wireless adapter.
Similar Messages
-
I have a good connection thru both wifi and ethernet but cannot get to the internet
I have a good connection thru both wifi and ethernet but cannot get to the internet
Which model iMac do you have? Which OS system is currently installed on your comp?
-
IE browser and Web Cache and SSL - Internet Explorer cannot display the web page
When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
LokeshHello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful. -
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.
yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
"Internet Explorer Cannot Display the web Page
on August 7th
I purchased a brand new computer that has
Vista Home premium on it,
To date I have not been unable to open this program.
I have been looking for help ever since,
I have been all over the net, I have tried
Lenovo sites.
I tried to call Lenovo, unfortunately I got no help there,
as I am deaf.
I looked through this site, in the hope that someone
who might have experienced this can help.
The Welcome center comes up when I start the Computer.
when I click on Internet explorer this is what I get.
Internet Explorer Cannot Display the web Page"
Most likely Causes:
*You are not connected to the Internet.
* The web site is encountering problems.
* There might be a typing error in the address.
"What can you try"
'Diagnose Connection Problems"
I did this and this is what I got.
Windows did not find any problems with this
Computer's network connection.
I tried more suggestions, and got more of the same.
I tried everything that looks promising, to no avail;
Please help if you can, it would be much appreciated;
Regards
Victoria
Lenovo 3000 H210 53552p desktop
Vista home Priemium 64Victoria,
There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
Dennis -
Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
when I type an address ..... THEN, when it can't find the website I get the message
"Internet Explorer Cannot Display the Web Site". ***.
Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
Ideas, please! Thanks.I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.
-
IOS 6, Netgear access point and Internet
Hi,
I’ve reached a point where I’m not entirely sure what to do next.
Here are some quick details (all are on most recent firmware unless stated):
Router: Draytek Vigor2830n
Access Point: Netgear WG102
Devices: iPhone 4, iPhone 5, iPad 2 and two iPad 2’s for comparison on iOS 5.
So, all devices running iOS 6.1.3/4 will connect to the Netgear access point just fine, can browse the LAN / stream media from network shares but internet access seems to be 'delayed' and can take anywhere between a minute to 20 minutes to connect (I give up after this). In comparison both the iPad 2’s running iOS 5 will gain internet access immediately after connecting to the access point.
On the other hand, when connecting to the routers wireless on all devices it works flawlessly and internet connection is 'instant'.
Given the problems that Netgear wifi has had with iOS 6, which were supposedly ‘fixed’ in iOS 6.1, I’m not sure what to do. It’s definitely a software problem, and could well be something to do with the router (along with connecting to the access point and iOS 6), but I’m not sure what to start changing first. iOS 5 works fine, so what has changed in iOS 6 to break it?
Its not a security issue like before 6.1 and not being able to connect to the access point at all.
Basically:
- I either need to figure what in iOS 6 is causing this ‘delay’ and how to fix it
-Give up on the access point and buy a new one (seems a bit extreme given that every other devices works fine – iOS 5, blackberry, laptops etc).
-Wait for iOS 7, hopefully in the next couple of weeks and see if it fixes it, though I can find little information on this issue as it is, and nothing to suggest iOS 7 might help. Though if iOS 5 is fine, iOS 6 broke it and 6.1 slightly fixed it, maybe iOS 7 will cure it? Doubt it…but worth waiting a few days.
Anyone got any suggestions? I have been through all the usual (HTTP proxy, forget this network, reset network settings), nothing makes it work flawlessly like iOS 5 and the issue is the same on a wide spread of devices running iOS 6.Dont know my routerand access point works fine. Try http://support.apple.com/kb/HT4199 and make sure your setting are correct.
-
I have an iphone 4 and have always been able, until recently, to access emails and internet. I have tried resetting everything, without luck. Any ideas?
Hi Sampolitis,
If you are having issues with an iPhone accessory, try the troubleshooting steps in this article.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
This article outlines basic setup and troubleshooting suggestions for using Bluetooth accessories with an iOS device.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Hope this helps,
Mario -
I attempted to update my iPhone 4 without realizing that I need to sync it with my laptop. My iPhone 4 is now stuck in the connect to iTunes mode and now I cannot use it. Is there a way to reverse this so I can use my phone because I do not have my computer with me?
Maybe it was hacked before and now through the update it's locked back to the original carrier.
-
when i go to the itunes store, i can browse the store and purchase items. but it will not allow me to access my accout to see purchased items, or download tracks that are in the cloud. any help would be most welcome..
Hi. you definately have the same issue as i did. and it seems others do as well. after trying several things that didn't work. I had to shut down my mac, which is only a week old. upon restarting i had to hold down left command+R . In the top bar i had to select utilities. this is were i'm struggling to remember the intricases of the operation. i had to type reset password as one word and press enter. i cant rememember if i had to restart again or not! It brought up the box asking which language you wanted to use, chose english entered it. Again my recollection isn't good, not sure what happened next but it may have been one more box or my home screen. Entered my password went to itunes and logged in perfectly normal. I know this is a very sketchy version of events, and i wish i could recollect it in perfect step by step explaination. But having been on the phone for over an hour and trying so many different things , it became a bit of a muddle..
I also have an iphone and a windows pc on the same network, they were both able to log into and operate itunes correctly. so i knew it had to be my Mac..
Good luck.. -
I have connected to Wifi on my ipad, but cannot access the internet
I am trying to connect my ipad to a wifi network at my work so I can access the internet. It connects to the network fine, but I can't get on the internet. I'm not sure what info you need in order to help me, so please let me know, and I will provide you with what I can! Thanks.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Vpn client can access internet but cannot access internal network
I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....
enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80 -
I did have a previous version of Itunes and Quicktime that I used the control panel Uninstall to remove. When I do the download, I get a small window in the upper left saying Internet Explorer Cannot Display Webpage. It is trying to get to ....itunes64setup. I did check to see that all old Apple directorories, etc have been delete. Help!
Okay. Let's see if you've acquired some kind of restriction for the download site. These settings checks/changes apply to the IE downloads, so we'll be trying to use IE again.
Head into your Internet Options control panel, and click the Security tab. Click Restricted Sites.
Check to see if the following website is listed as a restricted site:
appldnld.apple.com.edgesuite.net
If it is, remove it from your list of restricted sites and try another download.
If still no joy, head back into the security tab of the Internet Options control panel. Click Trusted Sites this time. Click the "Sites" button.
Add appldnld.apple.com.edgesuite.net as a trusted site. Uncheck the "Require server verification" box. Now click OK and try another download. -
I recently downloaded firefox 4 on to my linux based notepad. This is an acer aspire one. Since Firefox 4 installed I have been unable to access any internet pages, through luanching firefox browser or the search bar on my desktop. I am connected to the internet through my home wireless connection, so don't understand why not able to view pages.
I have the same problem but can go on to some websites but not others. I have tried what was suggested about clearing recent history and also the proxy server but it hasn't resolved the problem.
-
I'm connected to the internet but cannot access my Apps
HP Photosmart Plus B210a, Windows 7 32-bit operating system. Previously been able to access my Apps but now getting a Server Connection Error - There was a problem connecting to the server. I can print wirelessly and from the internet. Not used it for a few months and the last change was when i changed the router to Virgin Media (everything worked then too) just before Christmas. None of the online solutions have helped so far.
zobo_76;
I hope you are doing well and welcome to the HP forum;
Thsi article may help http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&tmp_task=setupCategory&cc=us&dlc=en&la...
also GO HERE to make sure this is not the issue;
Let me know if I can help you any further.
Regards;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
Maybe you are looking for
-
I am trying to free up space on my solid state drive on my MacBook Pro, but am not having much luck. I have come to the point where I am asking myself, "is it possible to upgrade to a larger internal drive?" Please help. I appreciate the feedback.
-
Importing videos to Itunes (can't see "Video" on Itunes sidebar)
Guess that's a basic question: When I drag a video file to Itunes, it doesn't get added to my library...could that be related to the fact that there isn't a " Video" topic under " Library"? How can I fix this?
-
Can't use custom paper size in OfficeJet 7000
I"m trying to print invitations and returns on my OfficeJet 7000 Wide Format and it seems like half-sheet size paper is not supported. Anyone have experience / success / a clue? Thanks!
-
why not create a command that shows you how many miles the paket travel to distination . that way you can figure out your lentency right there base on the distance.. show distance x.x.x.x it will show you the distance from b/w the interface you are s
-
USER DEFINED FUNCTIONS IN FORM 6i
I am interested to learn how can I manipulate, call a database user define function in a form6i that I am now using. It should give me desire database information on the forms? I am sorry, if I could explain the topics? Thanks & regards Dharani Barma