WRT54G Ver 6 Losing connection

The problem I'm having is everyonce in a while (in about a weeks time) all PC's in my network lose the ability to connect to the router and Internet. I have to unplug the router, wait for a few minutes, then plug it back up, turn my PC(s) my on, and I'm able to connect. I've checked with Linksys and I'm currently running the most current Firmware for Ver. 6.
Do any of you GURU's have any ideas or fixes for this? Thanks in advance
I have the following:
WRT54G
Ver.6
Firmware 1.02.0
IP Address assigned by DHCP server on the Router
Max IP addresses allowed to connect is 9
ISP: Charter Cable 3Mb, IP address is not Static
3 PC's connected wired
3 PC's connected wireless
***I hope I've provided enough information****
Message Edited by earthling30 on 04-25-200709:26 PM
Thanks, PD

Sorry to interject a completely different answer here, but I have experienced the same problems.
Blame me for the newb I am, but here is what I did after losing conn and thinking that my modem was burned up after 2 years of use:
1)  Attempted to buy a new DSL modem on Easter Sunday...good luck...
2)  Went back home after not finding said modem to find connection working again
3)  Wife did not use her desktop for 10 days due medical procedure (no connection problems)
4)  Wife gets better, uses her computer, I start losing connection again.
5)  Not realizing step 4, I call ATT dsl and am told, maybe you need a new filter on your DSL line.  DL speeds return to proper speeds, think I am fine.
6)  Wife uses Outlook 18 hours later while I am on my networked machine, we both lose connection
7)  After reconnecting all possible wires, realize maybe the problem is with the latest Windows Update Patch OR a router problem
8)  Go to my trusty Best Buy contact at nearby store, named Jason, and ask Jason if he has heard anything like this in the last 6 weeks...He THANKED ME PROFUSELY as he and his brother were experiencing the SAME networking problem.  Jason removed the past 7 windows update patches and that removed the problem.
He has since turned off Windows Updates.  Jason said that a couple of the update patches could not be uninstalled, but the 7 or so that could be uninstalled did the trick and he has not had dropped connections since.
Anyone else experiencing this?  I talked to a cable modem user/friend and he has been experiencing similar problems but the Microsoft utility with his router allows him to double click to re-establish a connection, unlike me who has to power everything down, count to sixty, and power up.
(I have not yet uninstalled the patches but wondering what others have seen)
Thanks for the posts peeps!
Scott

Similar Messages

  • WRT54G v7 losing connection

    I have a WRT54G which is used as a wireless access point, so the WAN port is connected to the real DSL gateway, a SpeaadTouch 546.
    I tested this configuration with a WRT54G v2 before ordering a new one.
    Now, the new one is loosing connection with the speedtouch after approx. 2 minutes. When I save the configuration of the WRT54G (without changing anything) the connection is restored for the next couple of minutes.
    I do not have that problem with the other one.
    I recently loaded the latest firmware 7.00.1 but that didn't solve it.
    Does anyone has a clue how this can be the case?
    Thanks.

    Hi , if you look at the setup page...you should have an option called keep alive....enable that....also enter the MTU manually ,Keep the value 1492…

  • WRT54GS Ver 6 - Connectivity Issues.

    I purchased this WRT54GS about a month ago, and got it working. Everything worked fine, then this morning I started having issues. My Internet keeps 'locking up' to a certain point. When it happens:
    -I lose the ability to go to any web page
    -My online game I play connects fine, and works normally - but then it crashes when I try to go to a new Zone
    -Internet applications (Anti Virus, Spybot) can't connect to update - they don't 'see' the internet
    Yet - my VOIP continues to work normally. However, to use any other Internet functionality, I have to use Ipconfig /release and /renew.
    I have bypassed the Linksys router, and connected directly to the Cable Modem - and the problem vanishes. I tried updating the Firmware, no change.
    Does anyone have any suggestions as to what I can do to fix this?
    *Edit = I've checked out all the configuration options I can, and checked out every FAQ I could find. I hope someone reads this soon who can offer some advice.
    Message Edited by ItsJustJake on 03-19-200712:07 PM

    "Frunple" is right.Your problem is not unique and has been experienced by many customers who bought version 5 and 6 of this router. I was one of them who had 3 or more random disconnects a day for over 2 months. Linksys tech support tried very hard to correct this with many different reconfigurations but nothing helped. Exchanging the orignal router to two more version 6 routers also did not cure the problem. Only when I changed the router to a WRT54GL did the problem stop instantly.
    The reason is that the WRT54GL is really a resurrected WRT54G version 4 which was based on a different design. Starting with version 5 and 6 Linksys changed the RAM from 16 MB to 8 MB and the Flash Memory from 4 MB to 2 MB. They also changed the operating system to "VxWorks". Something is very wrong in this design.
    If you want to cure the problem then try to replace your router with a version 4 or earlier or get a WRT54GL which is really a "WRT54G version 4" with a new name.
    Since I did change I have now not had any disconnects for one month.

  • WRT54GS Ver 6 connection issues

    Does anyone know what would be causing my router to loose connection every week? I've done whatever was suggested in the forums here and still every week I have to do a hard reset to get the router back online. When this issue occurs I'm unable to log into the router's admin page, yet I can ping the router from all my PC's. This is the 2nd Linksys router that's I've gone through and both had the latest firmware. I'm thinking of moving to DLink or Netgear. Thoughts?

    As you are loosing connection every week ....it seems that routers software is not working properly ........ download the latest firmware from http://linksys.com/download ...... after upgrade reset the router for 20-30 seconds .....
    check if it is showing same problem.....

  • WRT54G vers 7 connection drop problem

    I've bought this router a week ago and sometimes in 10 minutes he dissapear out the wireless list... Sometimes it is in 2 hours and sometimes in few minutes.. I updated my FW to 7.00.4 But the problem stays..
    In games or MSN I log out then and 30 seconds later the wireless router is again in the wireless list and I must log back in.. Or I must turn the power off my router 30 sec. and then turn back in... It's very frustating
    Someone Can help me?
    Message Edited by JASL on 02-18-200702:46 AM

    try out a few tweaks in the wireless settings....
    change the ssid , channel to 1 or 11...
    under the "advanced wireless settings" , change the beacon interval - 50 , fragmentation threshold - 2304 and RTS threshold - 2304 ....
    do a power cycle after changing the settings

  • WRT54G ver. 6 can no longer connect to the internet after reset

    I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

    Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
    if not Easy Link connect didnt work then you need to do the configuration manually.
    1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
    2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
    3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
    4. access router. open IE, then type in http://192.168.1.1 on address bar.
    5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
    6. power cycle devices again. try to go online
    note: if you dont have latest firmware. try updating if needed
    Message Edited by whodas on 11-07-200601:28 PM
    it is EVIL enough for GOOD men do NOTHING.

  • WRT54G Ver 6 Internet connectivity problems

    Alright so here's the deal.
    I'm on Windows XP with Verizon DSL (in Orange County, CA) that uses a Westell modem (just modem, not modem and router combo).
    I have the old Linksys BEFSR41 v.2 router that runs with everything fine.
    I just bought the WRT54G Version 6 and connected everything up as needed.  Powered things down and then back up.  And it could not detect an Internet connection, but I could access the router via web browser.
    - Ran the Setup CD and it couldn't find the internet.
    - Upgraded the firmware.
    - I searched the forums and did not find a successful solution.
    - Called my ISP to confirm it is DHCP.
    - Talked to Linksys Support via phone and he had me do all sorts of stuff.  Releasing, Renewing, Local IP Address changes, pinging, MAC, etc.  All this to try to get some sort of IP address with the internet.
    - Tried it with a diff WRT54G Ver 6 (Yeah.  I bought two.  One for me, and one to bring to my parents), and it still didn't work.  (Can't be that both the routers I got are defective.)
    - Searched forums some more and ran across the EasyLink program.  I used it, and it tells me my freaking Wired adaptor is disabled.  Where do I enable it?  Can't be my computer because it all works fine with the old Linksys router I got....or could it?
    - Powered down and back up in many different combinations.
    Did all that to no avail.  Anyone got a solution?  I couldn't find anything that worked.  I'm about to go return this and get something else tomorrow.  Maybe if I wake up, there will be a workable solution that is replied back.
    Thanks in advance to all those that tried to help and posted something, or didn't post due to having no solution.
    - Chris

    Yup Yup Yup.  I tried the WAN address thing and it still didn't work.
    I was about to pack everything up and go return the stupid thing.  BUT.....I decided to talk to Verizon DSL support since I hadn't tried that.
    They helped me out good!!!
    Here's the solution.
    I plugged in the old router, the BEF, and went to Status to click the DHCP Release.  Then unplugged the old router.
    Then per Verizon DSL support instruction....powered down the modem, then powered it back up and waited for lights to stabilize.  Then I plugged in the new router, the WRT.  And went to Status (IP was already autofilled, with internet working) but I still clicked DHCP Renew.
    It all works.  WOOOOOO!!!! 
    By the way.  The WAN address thing is important.  I went to it on the new, WORKING router and disabled the WAN address.  The internet stopped working.  I re-entered in the WAN address I copied and the internet worked again.  So......yeah. 
    I hope for all those out there having the same problems as me, and without a solution, see this thread and try this.
    Thanks again for your guys' help.
    **edit**
    By the way.  Is there a way to stop my internet to being a stickler to this MAC address?  I'm just curious.  I'm gonna go google MAC address and see if I can read anything useful. 
    Message Edited by MavLy21 on 02-14-200710:51 AM

  • WRT54g Losing Connection

    Hello.
    I apologise if this is a known issue and has been posted before but you will understand the urgency when you read This.
    I have had my WRT54g ver. 2 for a few years now and all has been running fine until the last couple of weeks. The signal fluctuates from 54mb to no connection and everything in between. I have made no changes at all and even if I put my laptop next to the router this still occurs. I have 2 PCs and 2 Laptops in the house and this occurs for all!
    I have connected directly into the modem and connection is stable.
    The firmware version is 4.20.8.
    Is the router knackered or is there a solution?
    Thanks in advance.
    PS: I had to cut and paste this from a word document

    You have an old firmware on the router...Upgrade the Firmware...Click here to learn more...
    Re-configure the Router...
    If your Internet Service Providor is DSL follow this link
    If your Internet Service Providor is Cable follow this link

  • WRT54G ver. 6 --- Connection Problems

    I am currently plugged in to the DSL box.  It's working and, obviously, I am online and able to use the internet, BUT when I plug the DSL box and the computer all into the WRT54G ver. 6 Wireless -G Broadband Router, it says I have a connection on both the home computer that it is plugged into and my wireless laptop, but the internet does not work.  All of the lights on the router and the DSL box are lit up and work right.
    I really wish someone would help me out with this. D;

    dsl connections..need to be set on 2 internet type
    1ppoe: >>you do have a username and password
    2:dhcp>>dynamic ip
    you need to ask your ISP first if what is your internet connection type
    and kindly reply to htis message if you do have those information
    have a good day

  • WRT54G ver. 8 drops internet connection on wired & wireless Pc's HELP!!!!

    I have a WRT54G Ver. 8 wireless router & it continues to drop the internet connection on both my wired Pc & the laptop which is wireless.  I had a D-link router prior to it's demise was working fine.  I have cable as a ISP.  When I reboot the router, all is good again for a few pages & then it craps out again.
    Please assist me if possible, this is getting really frustraiting.
    Message Edited by kisskrazed on 01-12-2008 04:04 PM
    Message Edited by kisskrazed on 01-12-2008 04:04 PM

    kisskrazed wrote:
    I have a WRT54G Ver. 8 wireless router & it continues to drop the internet connection on both my wired Pc & the laptop which is wireless. I had a D-link router prior to it's demise was working fine. I have cable as a ISP. When I reboot the router, all is good again for a few pages & then it craps out again.
    Please assist me if possible, this is getting really frustraiting.
    Message Edited by kisskrazed on 01-12-2008 04:04 PM
    Message Edited by kisskrazed on 01-12-2008 04:04 PM
    Any chance you have an XBox connected to this router? I've got three friends all with WRT54G ver 8 routers with XBoxes connected and it almost seems like something is trying to hack the security password. I'm searching to see if there is then a lock out which requires a manual reset. It just started happening around Christmas time.

  • WRT54G Ver. 2: When modifying any of my wireless settings connection drops.

    Using a WRT54G Ver. 2 router.When I modify any of my wireless settings my connection drops as soon as I save the settings. I've tried resetting the router and updating the firmware, neither have worked. I've had no problems with this up until now, it's worked perfectly before. I'm not sure what could be causing this problem.

    When you change your wireless settings, any user who does not have the correct settings (SSID, encryption method, and key)  in their wireless adapter is supposed to be kicked off the network !   This is what wireless security is all about.
    To fix this problem, when you update the router's settings, you should be using a computer that is wired to the router.

  • WRT54G ver. 6 Connected to access point and internet, but cannot access the web

    I can connect to the access point and it shows that I an connected to the internet.  However when I open a bowser it says page cannot be displayed!  Signal is very good to excellent.  Also, I have been using it all day and it was working fine, until I shutdown.  When I booted back up it stopped working.  The internet is working!  I have XBOX Live working right now.  Just not the computer.  Any Help would be appreciated.
    WRT54G ver. 6
    Message Edited by SJohnson4 on 12-01-200607:35 PM

    Hi... it seems that your Wireless adapter on does get a IP address or DNS no after reboot. Try assigning a Static IP address and DNS on the Wireless Adapter. Also try to update the drivers for that wireless adapter.

  • Losing Connection with WRT54GS

    Hi All,
    First off I apologize if this concern has been noted and solved elsewhere on these boards. I recently moved into a new apt with a friend, we went with Comcast for our cable/internet set-up, and upgraded internet. Since I have a cable wire in my room we set-up the Comcast modem in there, as well as the new WRT54GS router I bought from Linksys, with the speed booster, not sure if that makes a difference. My friend is connecting through the router with a USB G card (also speed booster). Everything was working fine for the first 8-10 hours, the connections and hook-ups are all correct, but in the last 48 hours I have found that I have been losing my internet connection (I’m wired to the router). The linksys software has been diagnosing this problem as “Another network detected” and basically telling me that I am no longer connected to my router. In short, to fix the issue all I have to do is unplug the router, plug it back in, and wait 15 seconds and I’m back online. Obviously this isn’t a huge issue but it is getting rather annoying, especially since it seems to go offline every 2-3 hours after I fix it with the same issue. I have called linksys but was unable to get anyone the first time, so before I try again I was hoping that perhaps someone on these boards had a similar issue, or could at least tell me the direction to take, if its most like a router issue, or perhaps Comcast issue, in that maybe my wiring or modem is causing the problem. There are several other wireless networks in the area, I’m not sure if it could be an interference issue as well. The peculiar part is that my roommate has not lost his connection during my down time….
    Thanks in advance for your help
    Regards
    EMS

    I'd like to see some input on this one as well.
    I have the WRK54G and it is doing the same thing, it started about 3 weeks ago losing it's connection every 2 or 3 hours.
    I just reformatted my system (for an issue not related to the router obviously) and now it's losing connection every couple of minutes then reconnecting.
    The Linksys connection software won't even let it connect, but the default windows software will at least let it connect for a little while, it's getting pretty frustrating.
    I've had to wait for it to reconnect 3 times just while typing this.Message Edited by Douglajl on 03-20-200702:56 PM

  • WRT54GS-Ver. 6 - Never shows that it has internet connection

    Hi,
    I have been trying to resolve a problem and I can't no matter what I do.
    I have Model # WRT54GS - Ver. 6, I have had it over a year and the problem started a year ago when I bought it so my daughter could connect her computer wirelessly with mine.  It was working just fine and then it started disconnecting one computer when the other was on, the two of them could never be on at the same time, anyway my daughter moved out and I put the router away not worried anymore about the problem.  5 days ago I bought a Dell Inspirion Laptop with Vista and reconnected the router to my main computer (Dell Dimension 3000 with Windows XP)
    Here is the problem -  I can only get connectivity to one computer at a time or neither of them will connect, when I check out the advisor it ALWAYS shows up as if there is no connction to the internet even if I can get on with one of the computers.  I have a Touchstone telephony ARRIS modem with Cox Internet (always been the same) I have tried to download the updates for the router but I can never open it as it saves as  a VLC media file(.bin)  and if I try to "unzip" it , it says "cannot open file as archive"  always.
    I have reset, rebooted, un plugged all connections and I don't know what else to do. I have had about 4 diffferent encryption keys already when I have to disconnect. I have also tried removing it from my computer and re-installing .
    Can any one help PLEASE
    Thanks in advance.

    Ok, now I think I have a bigger problem,
    I did as posted from "HELM" and downloaded firmware and everything downloaded fine thanks to the instructions given, but after rebooting and unplugging, waiting 30 sec. and replugging the power, now easylink advisor tells me that it cannot find the router...I tried disconnecting the power to the modem and router as it indicates and then waitng the proper amount of time for each one and  reconnecting, but to no avail.
    So I diconnected the router completely and connected directly to the modem to be able to write back and ask what can I do now that the router is now longer recognized?
    Should I just trash it and buy another one because there is no hope for this one.
    Thanks in advance.

  • WRT54GS losing connection.

    I have seen messages already regarding the WRT54GS and it losing connection. I have the same problem with one I purchased today.
    It happens a few times an hour.
    Connection to the internet is fine when plugged directly into the cable modem. When I use the router is when the problems start.
    I have upgraded the firmware and it has not helped in the slightest.
    Has anyone actually got a working solution? If not then I'm getting a refund tomorrow.

    I have been having the same issues with my router lately. It is a Linksys BEFW11S4 - Wireless-B Broadband Router. It has the latest firmware and everything which was from like, April of 2005 since this is an older router model. I've had it for about 3 years now and have had no problems until this past week. I have Verizon DSL. Anyway, my network connection seems to fail every so often at least 6 times a day at random times. I use WEP security encryption and everything. Every time it fails, I have to reset the router and go into administrator configurations and retype the password then it starts working again. But it is annoying since I just lose connection for no reason when I'm in the middle of something. Even when it fails, it does not indicate that I lost connection or that my connection is weak. It says that the signal is still excellent all the time even when it stopped working and the Internet light is still on. Odd. Does anyone have any idea what is wrong or is it time for me to buy a Wireless-G router instead and hope that fixes the problem? Again, I have had no issues with the router and it has been working great for nearly 3 years until this past week and I did nothing to mess with it. Maybe is it just that the hardware is worn-out? I dunno, I just want this problem solved. I'm glad that I'm not the only one with this issue.

Maybe you are looking for

  • WIZARD FOR TABLE CONTROL DOCUMENTS REQUIRED

    hI ALL, cAN ANYBODY SEND ME DOCUMENTS RELATED TO TABLE CONTROL USING WIZARD.i NEED TO CREATE A TABLE IN WHICH I WOULD FILL THE TABLE WITH AND WHEN I SAVE IT I NEED THE ZTABLE TO BE UPDATED . cAN ANYBODY SEND ME SOME DOCUMENTS REGARDING HOW TO USE WIZ

  • Crystal XI Graph floating bar problem-needs to be like a gantt w/o the date range

    Post Author: mecca CA Forum: Charts and Graphs Here is my problem I have a min and max range of numbers(not a date)I need plotted along with a value in between the min and max date. All this data, the 3 fields come from sql 2005/vb.net 2005. So, the

  • What bapi return structure consists

    Hi experts,     can anybody clarify my doubt regarding bapi's used for data transfer. when we r using bapi for data transfer how error transactions will be handled. what exactly return structure consists. can we get error transactions log in the retu

  • Why does my 16 gigabyte iPad 2 now have 13.84 gigabytes?

    I have a brand new iPad 2, and restored it from one of my iPad backups. Now it shows up in iTunes and having 13.84 gigabytes. The other section takes up 0.75 gigabytes.

  • How to get back my application ?

    Hi everybody... I created an application in htmldb.oracle.com and made preferences as run application only after completing my whole project. Now i am unable to see my application in the application builder nor am unable to recollect the application