WRT54G Version 3.1 Connection Issues - Help Please

Good Morning,
We have a WRT54G Version 3.1. Our existing network is wired and functions fine, I am adding the WRT54G for a few wireless clients.
During testing I have connected the wireless to my computer via CAT5 cable to port 1. I have connected another CAT5 cable to the internet port of the router from a known good wall jack.
When I first open the default address 192.168.1.1 and enter the password, all seems well. Due to having servers that hand out IP addresses, I disable the routers DHCP capability.
I enter the following information for example:
Local IP: 81.0.0.90
Gateway: 81.0.0.1
Subnet: 255.255.255.0
DHCP disabled
etc.
After changing the the local IP and receiving a confirmation that my changes were saved and I will be going back to the previous page, the page won't display with the address changed to 81.0.0.90 and it is blank.
I release my IP address through cmd, clear my dns cache and reboot the computer. After restart, I am presented with the stock MS address of 169.254.X.X.
I cannot connect to the local IP I established at 81.0.0.90 and nothing appears to work. The only thing I can do is reset the router and start from scratch...again.
Any ideas on what keeps happening and how it can be resolved once and for all?
Thanks in advance
Message Edited by T1Tech on 10-23-200603:49 PM

even if you have two DHCP enabled on both routers in your network, you will not get an IP adress conflict (exception of course if you're cascading two wireless routers).
a LAN port (ethernet router) to WAN port (wireless router) connection can be established allowing you to have both DHCP server enabled on your routers.
by doing the LAN to WAN connection, you will have two networks in a network.. both network won't meet cuz they will have different IP adress... router 1: could be 81.0.0.90, then router 2 could be 81.0.0.91.
if you want your two routers to meet and be in the network together, you just need to follow QUAK's suggestion to assign a static IP adress on your PC. or better yet, you can just connect the router you're disabling the DHCP server with to it's LAN port from a LAN port as well of your DHCP server (router 1). this is a LAN to LAN connection... by doing that, you will be able to open up the interface of your router 2(DHCP disabled) since your PC connected to it will get an IP adress...
"a helping hand in a community makes the world a universe"

Similar Messages

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

You probably need to upgrade your Mac software to 10.8.2 to handle ios6.

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

My iphone 5 previously can connect to my Wifi at home, but now my phone can't connect to the Wifi even if it's in range , it appears ( unable to connect ) any help please ??

My iphone 5 previously can connect to my Wifi at home, but now my phone can't connect to the Wifi even if it's in range , it appears ( unable to connect ) any help please ??

Try reseting network settings.

Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
Need help to get this problem resolved
Thanks
Rohit

Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
Click on wireless tab ....change the channel to 11 .....click save settings ....
Go to advance wireless settings subtab ....
Beacon interval 75
RTS & Fragmentation threshold 2306...... click save settings ...
Click on status check Ip address & firmware version on the same & let me know ...

N8 wlan and hard reset issues, help please

Have a nokia N8, after installing Connectivity analyser beta from beta labs, my wifi reception has become very poor. i ave a wireless N router and before this date the signal was very strong. my friend has an N8 also, he tested the rooms i was having signal issues to see if the router was the problem, however he had excellent signal, leading me to think it was my phone. i uninstalled the app and he weak signal remained, i did a factory reset and the problem remeained, i did a hard reset and the problem is still there, I now have the added problem of no Ovi Suite and other Qt related app issues. Help please, this is really annoying. btw this is my second N8, really getting annoyed at Nokia now. any further specs, please ask

As synth_fg rightly points out it takes quite a bit of tinkering to recover from "hard reset" on N8. To give you an idea what would be involved:-
Download from Ovi Store website the sis installer of WordPress and install it on phone (wordpress install also Nokia Smart Install and all QT and PIPS components)
Launch Ovi Store on phone: which will download the .sis installer and should work without any error
Reinstall Social_1_2_update.sisx from here: http://nmota.messaging.nokia.com/clients/Social_1_2_update.sisx
At this point you are still without OVI Maps but you can install v3.06 pre-release from Nokia Beta Labs: http://betalabs.nokia.com/apps/ovi-maps-306 which will allow you to pinch to zoom on your N8
Happy to have helped forum with a Support Ratio = 42.5

TS1398 I am connected to my wi-fi and have full signal but im not connecting online, help please

Connected to Talk Talk wi-fi with full signal but not connecting to internet, then my connection to wi-fi goes and I try to connect again which it does but still can't load to internet, help please

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT4623 recent ios6 ipad wireless connection issues-help

?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Speed connections Issues Help?

Hi,
New to the forum and looking to receive any help with my problem.
Background Info:
I was on sky broadband and receiving a steady 4mbs D/L (Up to MB +Unlimited Broadband) at £12 per month.
A BT Representative cold called me and persuaded me to switch the broadband to BT (Already have the Phone with BT).
I was informed that i would get at least MB d/l and up to MB - so signed for the option 1.
Then I realized that my household is a heavy user,so changed the package to option 3 (Unlimited Broadband Usage)
costing me an instant £21.80 bill for adjustments.Fair enough.
The Problem:
After the 10 day period I am only getting 2.MB D/l at best.
I have been on the phone with BTU+their team of specialists and have still not resolved the issues as of yet.
I have to call back on Saturday after leaving the router on for a further 48 hours without powering down.
So Basically:
Paying twice as much for only half of what i was getting with sky?
If I could cancel the lot and switch back to sky .I would!
Rant Over (for now)
Thanks
Paul
Solved!
Go to Solution.

welcome to the forum
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Do you have any phone extension sockets in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Login Issues - Help please

Hi All-
I had to reinstall the OS system and now it is asking for a login. Not sure what it is-so I go back to the start up cd hold down C get to change password. Change password as system admin (root level). Quit installer and restart the mac. enter my name and the new password the screen shakes and drops out the password. What am I doing wrong?
Help please.
LB

Hi Sherry-
Thanks for the info - Just a brief history on my problem.
I was trying to open an application on the mac and it froze - nothing would work. I powered down at the surge protector. restarted to have the mac hang on the grey screen with the apple. Let it sit for 15 min with nothing. Called and apple dealer near us and was told to reinstall the OS. I had to do an archive & install. I think I had 10.3.9 but the system cds were 10.3.1 or something like that. So reinstalled and you know where I am. SO, should I still restore the netinfo data base? Will this effect my network with others. I back up my HD to another mac at night and vicea versa.
Thoughts.....
Thanks for your help!
Larry

JCA Binding Component connection issue - Help plz

All,
soa - 11.1.1.3
I configured a async BPEL which reads data from DB (using DBAdapter) and write to a file. I'm getting the following error frequently. But same BPEL if I test it after few minutes it works, its very intermittent. Any clue?
I checked the DB which is installed locally, its up and running. No issue i seen in the DB.
Caused by: BINDING.JCA-12511
JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
*OutOrderRequestMap:TerritoryPull [ TerritoryPull_ptt::TerritoryPull(TerritoryPullInput_msg,TerritoryPullOutputCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/DB/orafin11i from JNDI and get a new Connection Handle.*
Thanks,
sen

Are you using JDBC Xa datasource ? Try following the steps defined in this forum link @ Re: Error at the time of Invocation of DB Adapter

Connection issue help

I have intermittent connection issues. I have been calling and calling..... We did finally get someone who spoke English. A "technician" came to the house and found nothing wrong with the connections, other than to tell me that in our apartment we have copper wiring and that there is nothing that they can do. Although, my neighbor, who has Charter, has never had an issue.
I overlooked the fact that the "technician" that I'm paying the service for, only glanced at my computer and told me that there was nothing wrong. Now I still left with a connection that constantly drops, is still an issue.
I called again, only to reach someone I can barely understand, who tells me to disconnect the connection that goes from the modem to the computer and switch them. Uhm, okay. Just for fun, i switched the cords (spun em around) . I asked what purpose this would serve as I'm using the same cable? Obviously, this did not change anything.
I have called several times and am left on hold.
I called once again to inquire why my Verizon in Home Agent would not connect to the internet. Although, I did have internet service. The agent said that the In Home Agent would come on only if I had a connection issue...This makes absolutely no sense.
Lastly, after being so frustrated, I managed to spill a drink (fortunately, I had not yet reached for the bottle of liquor). This brings us to a new dilemma, the computer now does not turn on. (using the laptop)... I have the insurance for a replacement/repair of my computer. I again called Verizon, no one has heard of this service, but yet I pay a monthly fee. "It's not something they handle" but they are willing to TRANSFER me AGAIN.
{edited for privacy}

This is DSL-101 - but make sure your phone cord is no longer than 12 feet long ... and not one of those cheap "ribbon" phones cords. It's not the ability of the signal to reach the modem - rather the ability of your modem to transmit through the length of the phone cord. (You would be amazed how many people how 50' phones cords going to their modems). The shorter the phone cord, the better.

Connection issue! Please help ASAP.

So I have a macbook pro running OSX Lion and I also have a Sony running windows 7. I connected my bold 9900 running 7.0 before to my windows laptop to update it to 7.1. After it updated successfully, I was able to use it on my Mac and PC and whatever. Now, 2 days later, My Mac doesn't recognize it! All I get it power supply to charge the blackberry or USB mode which the blackberry desktop software doesn't detect. My SONY does detect it though somehow and works fine with desktop manager. I have tried everything rebooting all devices, trying a different USB port and different wire etc but nothing helped! I really need it to connect to my macbook again! Any ideas? PLEASE AND THANK YOU!
Solved!
Go to Solution.

I have fixed the issue, I complety un-installed it from the un-installer in the dmg file when you download it from the site. Re-booted the mac, installed it and re-booted!
Works fine now

Need Help with WRT54G version 5. Connectivity

I have a laptop that is gaining wireless access from a remote router, I also have a WRT54G V5 router that I want to connect to the laptop and use to send a signal to another PC(with antenna). I would think this is possible, but not exactly sure how to go upon it. Please be specific with any replies as I am not the sharpest tool in the shed when it comes to computers. Thanks.

The set-up you are trying will not work if you are trying to communicate your remote router wirelessly to the WRT54G router...It is indeed possible if you can connect your remote router using an ethernet cable to the WRT54G router...

WRT54G Version 3.1 Connection Issues - Help Please

Similar Messages

Maybe you are looking for