WRT54G version 6 random disconnects

I have upgraded the firmware, reset, rebooted, everything the non english speaking tech support told me. The router still randomly disconnects. The only way to fix it is to reboot it. HELP. I am a gamer, and cant have this.

LOL.... been there... done that. Modem is fine. I've sifted through these forums and the FAQ's before I made a post. All the noob steps have been done man. Trust me. I did come across somewhere else though that the newer versions of this modem are made with less memory and therefore may be a hardware issue that can't be fixed. Is this true?Message Edited by Mojofoot on 02-12-200707:40 PM

Similar Messages

Anyone else experiencing this? WRT54G version 6 random disconnects

My router randomly disconnects from the internet and only a reboot will get it back. Very bad for gaming. I have updated the firmware, reset, and reboot the router countless times. I have cable internet, so I disconnected the computer from the router and hooked it directly tot he modem.... no disconnects. Any suggestions?
(Edited for guideline compliance. Thanks!)Message Edited by JOHNDOE_06 on 03-05-2007 09:22 PM

I don't suppose a version 6 can be downgraded to a 3 with just a firmware change? Anyway, I too have had many problems of dropping connections and having to reboot my laptop and re-running "Secure Easy Setup". Today I downgraded my security settings from WPA-Personal to WEP 128 bit and so far have had no dropouts. Wonder if anyone else has tried this approach? If so, then Lynksys needs to do some serious re-working of their security software. BTW, I was never able to make WPA-2 ever work...system always reverted to WPA-Personal.

WRT350N - version and random disconnects?

Is it true that WRT350N disconnects a lot, i.e. cannot hold connection? How can you tell which version it is BEFORE buying it? thanks,

theonkar wrote:
The version no. is mentioned on the router( at the bottom).
I intend to buy it but I've heard so many bad things so now I hesitate to buy this brand. Which version should I look for? And if I can influence it as vendors sell whatever they have and don't have time to disclose these details. Thanks,

WRT54G, TalkAmerica DSL; random disconnections

Okay, using a wired connection with this router on two computers seems to work fine sometimes, but both computers become disconnected at random from the Internet at least once a day and I have to reset the modem and router to get everything working again. I set my modem to 192.168.1.1 and router to 192.168.2.1 as the help page said (before I did that I couldn't connect to the Internet at all). Anyone know how to fix this?
Also, this doesn't happen when the modem is connected directly to the computer.Message Edited by espio on 01-09-200708:04 PM

hi..try adjusting the mtu settings to 1392.....also, if possible try to set up the modem in bridge mode ... on the router select the internet connection type as "pppoe" and select the keep alive option...
let me know whether it works for you.....

WRT54G v5 Randomly Disconnects

Hi, I have been having this problem for the last couple of weeks and am not sure what the problem is. My WRT54G v5 router is connected via Ethernet cable from a cable modem to 2 PCs. Lately, the router randomly disconnects(i.e. there is no set amount of time in between disconnections - the interval has been as small as 30 seconds and as large as several hours), then reconnects automatically. Every time it disconnects it reconnects itself. However, I'm pretty sure this is not typical behavior and would like to fix it - especially as it severely limits online gaming. When I take the router out of the loop and connect either computer straight to the cable modem, I have no problems no matter how long I seem to be online. I have updated the router to the latest firmware version and that has no effect. If anyone has any ideas or suggestions, I would be very grateful.`Thank you for your time.
Message Edited by Hodges on 06-06-2008 04:59 PM

I have already upgraded the firmware to v1.02.5 build 002, Jan. 9, 2008, and I haven't noticed an improvement. Like I said, it's completely random. Some days it won't disconnect at all. Other days it disconnects fairly often. But I have no problems when I bypass the router and connect straight to the cable modem. Thank you for the response. If you have any other thoughts, I'm open to suggestions.

Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
Need help to get this problem resolved
Thanks
Rohit

Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
Click on wireless tab ....change the channel to 11 .....click save settings ....
Go to advance wireless settings subtab ....
Beacon interval 75
RTS & Fragmentation threshold 2306...... click save settings ...
Click on status check Ip address & firmware version on the same & let me know ...

Undocumented 'random disconnection' from manually connected wireless

I have got a USB-N13 wireless-N300 dongle.
According to 'lspci -k' I have the drivers, and I have a wireless interface. So I know that my dongle has drivers but I don't know if they work 100% well.
I will show the output of various normal commands:
$ iw dev wlp5s0u1 link
Connected to <mac address> (on wlp5s0u1)
SSID: <ssid>
freq: 2437
RX: 19939057 bytes (111695 packets)
TX: 319269 bytes (2813 packets)
signal: -50 dBm
tx bitrate: 7.2 MBit/s MCS 0 short GI
bss flags: short-slot-time
dtim period: 0
beacon int: 100
$ ip link show wlp5s0u1
3: wlp5s0u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether d8:50:e6:f4:33:24 brd ff:ff:ff:ff:ff:ff
$ dmesg -w
[ 6.634808] r8169 0000:04:00.0 enp4s0: link down
[ 6.634847] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 6.636405] rtl8192cu: MAC auto ON okay!
[ 6.648784] rtl8192cu: Tx queue select: 0x05
[ 7.006529] IPv6: ADDRCONF(NETDEV_UP): wlp5s0u1: link is not ready
[ 8.751113] wlp5s0u1: authenticate with <mac address>
[ 8.774294] wlp5s0u1: send auth to <mac address> (try 1/3)
[ 8.792882] wlp5s0u1: authenticated
[ 8.794125] wlp5s0u1: associate with <mac address> (try 1/3)
[ 8.815636] wlp5s0u1: RX AssocResp from <mac address> (capab=0x411 status=0 aid=4)
[ 8.815672] wlp5s0u1: associated
[ 8.815712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0u1: link becomes ready
[ 265.580381] type=1006 audit(1394469140.822:2): pid=253 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 265.639231] type=1006 audit(1394469140.882:3): pid=495 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 272.723778] fuse init (API version 7.22)
[ 291.938590] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 291.981059] ISOFS: changing to secondary root
[ 385.885587] hda-intel 0000:00:1b.0: Unstable LPIB (130824 >= 8192); disabling LPIB delay counting
[ 423.970540] r8169 0000:04:00.0 enp4s0: link up
[ 423.970548] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
This is all the information from when I fist see an wireless interface.
All, I can tell is that my wlp5s0u1 doesn't go down, but a few seconds before I plug in my wireless bridge, or enp4s0, my 'Internet stops...' Or I can't search google, and my youtube stops streaming, conky says that about 30bytes get transfered from that point on, and there is no errors?!
I'm not on a laptop, and my device's power saver is set to off. And as I'm not getting the second error I don't know how to fix this.
$ iw dev wlp5s0u1 get power_save
Power save: off
(Sorry if this is blatantly obvious, I've only had arch for under a month, with no prior Linux experience, and my dad can't help me with it too!)
EDIT:
Please can someone please tell me something that I can try or look into to resolve this, I have a useless dongle now, and an Internet connection that drops at least 50% of the packets.
Last edited by Peilonrayz (2014-03-12 17:18:43)

Unfortunately, join the crowd ....
Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
Intermittent WIFI with Leopard on Macbook
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
New MacBook Pro & Leopard - Airport Connection problems
http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
Airport random disconnect
http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
... that's a couple of the major threads about this issue, that has been going on since June.

Random Disconnection From My Wireless Access Point

I got my MacBook a few weeks ago, wand I'm loving it... for the most part.
Info: I've been using my Linksys WRT54G router for years. I've never had a problem. I currently have a desktop Mac connected to it along with my MacBook, and the connection on the Mac is fine.
*The problem:* My MacBook doesn't hold a steady connection to my router, even when I'm just mere feet away.
*What happens:* I have a very strong connection on my WiFi with the built-in AirPort. Then, a few seconds later, all of the 4 bars drop to 0 for a few seconds, jump back to 4, go back down to 0... you get the picture. I find this frustrating, as the internet may shut down for a minute at a time, regain connection for a few seconds, and then lose connection after about 10 seconds. I am unable to use iChat (it shuts down whenever I lose connection), or easily browse the internet.
*I know it's not the router. My desktop Mac connects with ease. Should I take my MacBook to a Genius Bar?*
Message was edited by: Pickleman

Unfortunately, join the crowd ....
Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
Intermittent WIFI with Leopard on Macbook
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
New MacBook Pro & Leopard - Airport Connection problems
http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
Airport random disconnect
http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
... that's a couple of the major threads about this issue, that has been going on since June.

Sporadic random disconnects this week, very bad to...

I've never had any problems with BT Home 2.0 until this week, I have moved nothing about in my room nor adjusted any settings on the hub and my PC. I have changed the filter and still the same problems occur. I've noticed a lot CRC /HEC errors on the up stream... I live in Bristol if that might help to solve the problem. Maybe something next door could be affecting the line or a BT engineer has messed around with something on the exchange? (I am using a wired connection BTW). Any help and suggestions appreciated, thanks, Rob.
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:10:20
Downstream
9,727 Kbps
Upstream
636 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
7.5 dB / 8.5 dB
Line attenuation (Down/Up)
33.5 dB / 18.4 dB
Output power (Down/Up)
21.0 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 208
CRC Errors (Down/Up)
44 / 2147480000
HEC Errors (Down/Up)
nil / 566812
Error Seconds (Local)
39
TCP/IP settings
Broadband network IP address
81.151.168.20
Default gateway
217.32.141.33
Primary DNS
194.74.65.68
Secondary DNS
194.72.0.114
C:\Users\Robin>tracert 217.32.141.33
Tracing route to 217.32.141.33 over a maximum of 30 hops
1    94 ms    98 ms    99 ms BThomehub.home [192.168.1.254]
2    16 ms    16 ms    16 ms 217.32.141.33
3    18 ms    18 ms    33 ms 217.32.141.78
4    16 ms    16 ms    15 ms 217.32.141.33
Trace complete.

Sorry I can't offer any magic suggestions.   I had been getting regular disconnects for some months and even though I was keeping the router continuoulsy powered to avoid loss of line synchronisation it still was occurring.   See my comments in the thread "Re: Disconnects on Accessing HH and Random Disconnects at Night" for 10 Feb.
The Forum Moderators were very helpful and responded to my queries and arranged four visits from OpenReach to try and sort out the problem.    Eventually they decided that there was a fault in the exchange boards and made some change. Subsequently I kept the router powered up until the 13 May to make sure there was no synchronisation interrupts.   The line eventually stabilised at 14,336 kbps.   It has remained at that even with my logical disconnects at night from the HH Home Page.
I found from a search back in Jan as reported in the thread "Re: HH Type B Energy Consumption & Switching Off the Router" , that the Type A software version was 8.1.H.J. I don't know if it has been upgraded since.   I have found for my Type B that when received it back in Oct 2010 the ver was 4.7.5.1.83.3.5. and it is now ....83.3.18.   - when it was changed/upgraded I don't know.
As I say, although I still get random disconnects, it doesn't seem to affect my line rate.   Not sure if it is noise on the line (i have made a quiet line check and that is OK) as the Noise Margin is ca 7.6-9.1dB. I get disconnects sometimes when I try to look at the ADSL Settings, etc., having typed in the password for access. I have just looked at my Events Log and there have been a number of disconnects today since the router was logically connected at 14:04 this afternoon; 5 in total I think!   And the rate is still shown as 14,336 kbps.
Jun 3 21:29:30 2011    (26713.110000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 18:26:16 2011    (15719.410000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:25:47 2011    ERR 2011-06-03T17:25:47Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:25:46 2011    (15688.810000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:25:46 2011    (15688.740000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 18:06:05 2011    (14507.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:05:35 2011    ERR 2011-06-03T17:05:35Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:05:34 2011    (14476.950000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:05:34 2011    (14476.890000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 15:03:16 2011    ( 3538.970000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 15:02:48 2011    ERR 2011-06-03T14:02:48Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 15:02:46 2011    ( 3508.470000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:34:10 2011    ( 1793.130000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:33:41 2011    ERR 2011-06-03T13:33:41Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:33:40 2011    ( 1763.120000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:33:40 2011    ( 1763.070000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:06:16 2011    ( 119.040000) WGET: Error connecting to host https://pbthdm.bt.motive.com/cwmpWeb/CPEMgt (66.193.112.93:443)
Jun 3 14:05:44 2011    ( 109.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:05:39 2011    ( 104.560000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 14:04:43 2011    ERR 2003-01-01T00:00:27Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:04:39 2011    ( 44.450000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:04:39 2011    ( 44.380000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:04:23 2011    ( 28.920000) DVA started
Jun 3 14:04:23 2011    ( 28.170000) sys_if_stats_reset failed for atm0
Having said that your rate is quite reasonable and unless you are playing games or watching videos perhaps the interrupts will not be serious.   We only use it for email, family history, ebay and browsing so it is not really noticeable.
Rodney Fry

WAP321 random disconnecting clients

Hi all,
I'm having problems with my WAP321 that is randomly disconnecting clients. It's not disconnecting all clients, but just a couple of clients. It's random which clients get disconnected and it can be different clients that will be disconnected when it happens a couple times, but they do get disconnected at the same time.
My setup:
Cisco ASA5505
|
Cisco WAP321
|
Cisco 7925 phone - iPhone - Macbook - three IP cam's (different brands) - and some more clients
Last time it occurred I just for sure changed DHCP server from Cisco ASA5505 to two windows servers, now it happened again, my 7925 started beeping (enabled SSID monitoring on it so it alerts when it isn't connected to my Callmanager) and my iPhone couldn't connect to the SSID. My Macbook was still just connected. Retrieved a diagnostics report and checked the logging, rebooted the WAP321 and everything started connecting again.
Noticed screens are scaled so hope it's readable...
The MAC address is my iphone. I turned off the 7925 because the beeping was annoying so no logging from the 7925 trying to connect.
Logging is saying:
assoc request from [mac] BSSID [bssid] SSID LEVELS
STA [mac] deauthed from BSSID [bssid] reason 3: STA is leaving IBSS or ESS
There is nothing wrong with the coverage, the WAP321 is about ten feet from the iPhone and Cisco 7925 phone
Can anybody help me how to best troubleshoot this issue. I'm not familiar with the troubleshoot/debug options available for the WAP321

Dear Wesley,
Thank you for reaching the Small Business Support Community.
There is an opened caveat on the latest firmware release, version 1.0.4.2; CSCue24521:
-Symptom: Some clients may lose wireless connection when authenticating via Captive portal.
-Workaround: Reconnect wireless devices.
If this is not the case I'd like to know if you have tried using a different IEEE 802.11 standard, same as a different authentication type. If you are not running the latest firmware release I then suggest you to, and something else I've seen from experience that fixes similar issues is to reset to factory conditions and reconfigure manually.
http://software.cisco.com/download/release.html?mdfid=284152656&softwareid=282463166&release=1.0.1.10
I hope you find this information helpful and please do not hesitate to reach me back of there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

OS X Lion - iChat keeps randomly disconnecting me!

I am using OS X Lion and I love iChat. It combines both simplicity and powerful usage in a nicely designed app. I don't want to use any other alternatives. I want my iChat to work again.
Has anyone been facing the same problem ? iChat keeps randomly disconnecting!

Hi,
In previous version of iChat that could log into AIM with (or without) SSL had two Server names that used to show depending if you used ther SSL or not.
The names of the server used to change as you selected or deselected SSL
SSL was added in iChat 4 to the AIM logins
The server name was slogin.oscar.aol.com
It was known that this server seemed to be less stable than the "regular" Server (login.oscar.aol.com)
This may have been due to the lesser number of server involved with any SSL Logins and any drop at the server end was therefore more noticeable.
It is also known that AIM require that any dropped SSL connection is manually restarted and should not rely on Automatic reconnection.
This generally means that if you are using SSL then you will need to do a manual reset and restart of iChat if the connection is lost.
(hence my suggestion earlier that SSL be turned Off for AIM logins until the Servers had become more stable.
iChat 6 (in Lion Also automatically changes any account that logs in to AIM to the api.oscar.aol.com server.
It appears that this server can handle SSL and non SSL logins (there is no name change).
You can manually change iChat to use the older server variants.
7:57 PM Tuesday; December 13, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Dial-up randomly disconnects.

I use an IMac G5 & dial-up internet via the built in modem. Ever since I upgraded to OS 10.5 I have had this problem. I can usually count on a random disconnect occurring within the first 15 minutes of going on-line. After reconnecting I can usually go for a longer period.
About a minute before the disconnect, all network activity comes to a halt. After the disconnect I get the alert message: "The modem has unexpectedly hung up. Please verify your settings & try again".
The hardware test didn't uncover anything. I also installed OS 10.4.11 on an external drive & when I boot from it I never have this problem so I believe this to be a software problem with 10.5.
In the earlier revisions of 10.5 I would also frequently get a kernal panic requiring a reboot. I believe this to be a related problem because these only occurred when on-line. With the later revisions, the kernal panics have become less frequent. So far I haven't had a kernal panic with 10.5.6 but the problem of random disconnects remains.
Anyone else had this problem?

Thanks for your suggestions.
I installed 10.5 from the original DVD I received when I purchased leopard on an empty volume on my external drive which I erased just for this purpose. I used just the default installation options. The problem of random disconnects continues. As one of the disconnects was taking place I also got a kernal panic. As I noted in my first post, it is the early versions of 10.5 that are most prone to kernal panics & I suppose if I also upgraded this install to 10.5.6 the kernal panics would go away.
Do you have any other suggestions?

My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

Does this happen with all Wi-Fi hotspots? A specific one?
Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
What about power cycling the Wi-Fi router?

NAT issue - WRT54G Version 1.1 with Vista Home Premium

Router = WRT54G Version 1.1
I am trying to figure out the cause of my problems, this router or Vista?
I have 2 PC’s (just want to use my Vista 1) connected to the same router that is connected to a cable modem – the Windows XP machine has no problems bar its age and spec. I have a brand new PC with Vista Home Premium installed on it, now it is this new PC that I am having NAT problems with and port blocking.
I have installed Windows Live Messenger and when setting it up I went into Tools/Options/Connections and I get an error message:- "You are connected to the internet through a UPnP port restricted NAT. The Windows Firewall is enabled. (User)"
I have no option to run the trouble shooter (greyed out)…….
If I turn off Windows Vista Firewall I get:- "You are connected to the internet through a UPnP port restricted NAT. (User)”
Since this I have installed Media server software and have to reset the port it uses every time as it is always stating that it is blocked.
I have downloaded OpenOffice via a torrent client which also stated that I had NAT problems.
I have no NAT issues at all on my older XP PC and as a result I believe it is safe to rule out my router and modem……..I have only disabled Windows Firewall and this had made no difference, but I have not tried uninstalling it (no idea if that would make a difference)
Oh, I do not have UPnP enabled (router setting) – does this matter (I have tried turning it on but made no difference to this issue so I turned it off again)?
Message Edited by jomuir on 08-23-2007 02:50 AM

user11241256 wrote:
Documentation states that Oracle is supported on Vista business and Ultra. unfortuntatly Ihave Home Premium 64 and was curious if anyone had experience imstalling on this OS. I did attempt to install the 11g and I got one warning below that I could not find in the documentation for errors. You have answered your query yourself.
You might be able to get the things running on an unsupported combination but there is no guarantee about the stability.

IPod Classic Randomly Disconnects from Car Stereo

I have a 160GB iPod Classic that is hooked up to my car stereo. Previously it was connected to a 2012 Kia Sorento SX and it would just randomly disconnect from the stereo and freeze. The only way to get it back was to do a hard reset (menu/select button held down), then start playing a song, and then connecting to the stereo. It didn't happen frequently, but maybe once or twice a month. Annoying. But I thought it had to do with the way Kia implemented the connection to the iPpd.
I just recently acquired a 2014 Acura MDX and I've already had that same annoying problem twice in 2 days. So now I'm starting to think maybe it's the iPod.
In the past, I've done a full restore, repaired the drive, etc. Nothing seemed to help.
Any ideas? Thanks!!

Sometimes this works. Otherwise you will have to wait for an updte to the car system or the iOS on the iPod
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the car system
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

WRT54G version 6 random disconnects

Similar Messages

Maybe you are looking for