WRT54G version 8.2.03 WITH XBOX 360

HI I Have a problem with my xbox 360 when we play the xbox 360 we lose all access to are wireless computers, when we turn the xbox off all wireless connections are back is there a setting that has to fixed somewhere thanks.

You need to upgrade your router's firmware...
Download Firmware 1.67 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
xbox settings : 
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
4) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
5) Click on set-up and change the MTU Size to 1452 and click Save Settings...
6) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
7) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
8) Turn off your modem, router, and Xbox...Wait for a minute...
9) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Similar Messages

  • Linksys WRT54G compatible with XBOX 360's Wireless Network Adapter?

    Is the Linksys Wireless G Broadband Router (WRT54G) compatible with XBOX 360's Wireless Network Adapter?

    Use the LAN port and cable. That way you'll get no interference and great data transfer. Or this maybe helps. http://www.xbox.com/en-US/support/connecttolive/xbox360/homenetworking/equipment.htm
    Message Edited by iknownothink on 06-21-2007 03:44 AM

  • No ip with wrt54gl with Xbox 360

    I'm stumpped. Brand new, version 1.1 wrt54gl.. replaced my old dlink one which worked fine for my 360 wrt54gl will not give my 360 a ip address. everything else on the router works fine. this is all wired. tried statically assigning one.. no go dmz.. -- no go. checked wires.. tried different ones... everything else gets an ip. tried turning firewall off.. UPNP off and on.. plug back my dlink.. works fine.. can connect to xbox live and play. i hate to return this, but any ideas? is this just not compatible with xbox 360? please help!. -Bmac6996

    Try this link to configure the X-BOX .....

  • Connecting with Xbox 360

    is there a reason iPhones won't connect with Xbox 360's like iPods did?

    Because even though it plays mp3 and has ipod capabilites...it's a phone! Were you able to connect your previous cell phone to your Xbox?
    Message was edited by: iphonechik

  • Is the Plantronics - GameCom 377 Headset compatabile with Xbox 360?

    is this head set compatabile with xbox 360, the specs on best buy.com do not say!
    Plantronics - GameCom 377 Over-the-Head Stereo Headset
    Model: GameCom 377| SKU: 8978403
    Customer Reviews:  4.0 Read reviews (83)
    <script type="text/javascript"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/jquery.cj-object-scaler.min.js"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/ku4j-min.js"></script>
    <script type="text/javascript"></script>
    Shipping: Usually leaves our warehouse in 1 business day
    Estimate Arrival Time ›
    Store Pickup: Check Stores ›

    Hey kole71,
    That particular model of Plantronics is compatible for PC gaming but not Xbox 360. Plantronics does have some headsets that work with 360, and I've attached a PDF of the chart found on their website. Hope that helps!
    Mariel|Community Connector | Best Buy® Corporate
     Private Message
    Attachments:
    gaming_portfolio_data_sheet_us.pdf ‏1235 KB

  • WRT54G Issues with Xbox 360

    Okay, I got this Wireless router so that my family could get more then one computer eventually. Now we only have one computer still but we have added an Xbox 360 to our network recently. However, the version 6 that we bought is not on xbox 360 compatible router list and encounters some problems. Namely that it causes some of my friends games to be unjoinable and doesn't allow chatting with them. I need to figure out how to get this router to be able to work at full efficiency with my 360 or else I will constantly be hooking and unhooking the DSL cable and directly connecting to my modem. I'm curious if running it as a router instead of a gateway may help with this. I'm also curious if anyone has already fixed this problem. Any more data needed by you I will gladly provide. Oh, also, the ISP is Windstream.
    Message Edited by CipherMachine on 06-16-2008 04:14 PM

    Hey very first thing you need to be able to go Online using the DSL modem with the router & the pc.Also, the firmware should be latest then you will be able to do the wireless & advancedc wireless settings & now connect the XBOX to be connected to the router & for XBOX settings... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live & you will be able to play the games on the XBOX live.

  • WRT54GS V7.50 with XBox 360

    Sorry guys i know you probably get fed up with all the 360 questions around here, but I have tried searching here and google (Someone will now find an answer to my Q! lol).
    Anyway heres how my setup is.
    Modem into router
    Cable from Router to PC
    Laptop connects wireless with built in wireless
    Cable from laptop to Xbox 360 and share net connection.
    Now, it all connects fine, I signed up to LIVE bla bla.
    Did a test everything looked fine, NAT even said OPEN. Mate send me a request to play Halo3 and says I cant connect and mentions NAT. Tried all sorts of different guides. One told me to give the xbox an IP manually, but then it just doesnt connect, do a test and gives an error when it comes to "IP".
    Now the IP it gives automatically is 192.168.0.xxx
    Yet all my other IPS, and when using port foward etc on my router, i dont have the option to use a IP that end 0.xx there all 1.xx?
     Is this because I'm connecting through the laptop?
    http://www.ianarchbold.com/xboxlive/ <---- this is one of the guides I tried to follow
    Cheers for any help.

    Conenct your xbox directly to the router then it will work fine. The ip 0.xx is because your xbox is connected to the lap top.

  • IPod update causes iPods to be incompatible with Xbox 360's

    http://discussions.apple.com/thread.jspa?threadID=1033587&tstart=0
    (I felt that this topic belonged more in the compatibility forums.)
    Since the iTunes 7.3 iPod software update, the iPods updated are now incompatible with 360's.
    They now show up in the 360 system menu as "Audiobooks", and are unable to play from the predesigned playlists.
    This is fixed by reverting to iTunes 7.2 or earlier.
    However, one should be able to use the current iTunes version 7.5, and one's iPod with the Xbox 360, who many iPod users use as their entire media hub for their home theater systems.

    Look in the packaging and pieces of paper that came with the Xbox 360. Mine came with a piece of paper advertising the ability to connect and listen to your iPod, and at the bottom it had a disclaimer saying that it doesn't work with the iPhone or iPod touch.

  • Functionality with XBox 360 Pro

    Hey all,
    I recently bought a first generation XBox 360 Pro from a friend of mine, who restored the thing to factory settings before giving it to me. After updating everything that I could think to update, I downloaded the iPod update so I could get it to work and play music while playing on XBox Live. Both my iTunes version and my iPod are completely up to date.
    The problem comes when I try to plug the iPod into the XBox. The box will not recognize it as a device. If I knew how to get it to boot into some form of DOS, I'm sure I could figure it out, but as it stands with the very limited UI for the XBox's OS, I cannot get the XBox to recognize the iPod. So the question is this: does anyone know how to get it to work (and if so, how)? Or do I have to set up my PC to make the music accessible over the LAN?
    Thanks!
    (oh, and sorry for not searching, but I didn't see it on the front page)

    THIS ISSUE APPEARED LAST YEAR, AFTER AN UPDATE TO ITUNES AND MY IPOD. I USED TO PRIMARILY LISTEN TO MY IPOD THROUGH MY XBOX360 AT MY HOME. NOW I DON'T USE MY IPOD SO MUCH ANYMORE. I USED TO REALLY LIKE MY IPOD, BUT IT LOOKS LIKE IT'S ZUNE TIME FOR ME.
    IS APPLE GOING TO HAVE ANY KIND OF OFFICIAL STATEMENT ABOUT THIS??
    APPLE HAS REALLY NICE PRODUCTS, BUT BEHAVIOR SUCH AS THIS WILL KEEP ME FROM EVER PURCHASING ANY OTHER APPLE BRANDED MERCHANDISE!!
    ...REALLY FRUSTRATED,
    ANDY

  • Sharing Internet with xbox 360

    Hi, I have my Powerbook sharing internet with my Xbox 360. The connection works well and I am able to play games, but the NAT is listed as Moderate, with a Moderate NAT I am not able to do private voice chats with people. Does anyone know how I can get my NAT to Open? Also, I would like to share my media with my Xbox that is stored on a Windows XP computer. I followed all the steps given at www.xbox.com/pcsetup, but the Xbox still does not see the computer.
    Any help would be appreciated, Thnx

    If you are using Internet Sharing on your PowerBook you can forget trying to modify NAT settings or make nearly any other adjustments. There are very, very, very few options.
    If you want to make adjustments like that you need to get a real base station.

  • HDMI with Xbox 360

    I just got an xbox 360 and i hooked it up to my imac with my eyetv hybrid. Can use the HDMI cables to make it High Def? What can i use to make it so it will hook up to the cables.
    thanks

    If your receiver supports HDMI inputs and passthrough then go there first from the xbox, and send the passthrough to the TV.  If you can't do that then try digital audio out of the xbox to the receiver and HDMI to the TV for just video.
    I read something in another thread about some Toshiba TV outputting only PCM stereo as passthrough from a HDMI input so I bet that's what is happening here.

  • Replacing Apple TV with Xbox 360, Video Questions

    I have had an ATV for a little over a year and thanks to Handbrake I now have an incredible Movie Library over 600 flicks ripped for ATV with the .m4v extension. This month I am getting an Xbox 360 and would like to use it in place of my ATV and move the ATV to another room. I have been doing my research and everything says I should use Connect 360 or Rivet to make contact between my iMac and Xbox 360. Though I have read that movies with the extension .m4v will not read. I have read on various sites that I could just change the extension to .mp4 or .avi and it will work fine. Though alot of the data out there on connect 360 and Xbox 360 streaming seems to be outdated and I can't tell what has been fixed by updates. so... my questions are,
    1. Will my movies stream to xbox 360 via connect 360 in the .m4v format?
    2.If no, can I just change the extension to .mp4 or .AVI? (I changed the extension from .MP4 to .m4v on some movies when I got the ATV due to some recognition issues in itunes last year and had no problem)
    3. If I change the extensions will my ATV still be able to play these videos from elsewhere in the house?
    4. Will it all just work flawlessly with no problems thanks to amazing updates from all parties?

    I wanted a next gen game system. Part of the way I could convince my wife to let me get an xbox (Im whipped) was to offer to move the ATV to the bedroom so she could view our media in there. Since the Xbox has media center qualities I figured I would take atvantage of them. Now I trying to figure out the best way to get both working.

  • Iphone connect with xbox 360

    is there an app or a way to sync my iphone 3g with my 360 so I can stream music to my xbox to use in-game?

    thought id ask ive looked all over for a solution on this. thanks

  • Ipod Not Recognized With Xbox 360?

    i havnt played with my xbox 360 and ipod in a while. i connected my ipod video ver 1.3, 30 gb in and found out that it wasnt recognized. i have done the updates for my xbox 360. could my ipod be corrupt? was it an xbox update? an ipod update?

    This is an XBox issue. When they update that system it may work again.
    This has also happened with car stereo adapters.
    Message was edited by: camoracer

  • Toast9 for use with Xbox 360??

    Can I use Toast 9 to make a HD DVD for use on my xbox 360?? How does it work? Do I export the movie when I am done editing it with iMovie '08 to Toast? When I export now it the most it will allow is 960x540...will this change once I have Toast9?
    Thanks

    AppleMan1958 wrote:
    Toast 9 has a BluRay plugin. It does not, to my knowledge, have an HD DVD plugin...
    afaik, 'dead horse' HDDVD is supported out-of-the-box..
    indeed, for BR media, you need the BR-plug-in..
    read the specs on roxios site..

Maybe you are looking for

  • Create mobile Theme in APEX 4.0

    I'm using APEX 4.0 (4.0.2.00.06) and I have to create a Mobile application. I know there are mobile theme's available in APEX 4.1, but we won't switch to APEX 4.1 jet... So, I've created a Page Template, List Template and Report Templete, using this

  • Insert XML file into Relational database model - no XMLTYPE!

    Dear all, How can I store a known complex XML file into an existing relational database WITHOUT using xmltypes in the database ? I read the article on DBMS_XMLSTORE. DBMS_XMLSTORE indeed partially bridges the gap between XML and RDBMS to a certain ex

  • ADSL problems - Slow - Noise on phone line

    Hi, Im hoping someone can help me with Broadband issues I've been having. Ill try and describe the salient points without turning into a rant. Suffice to say Ive had a torrid time over 2 weeks, spending hours on the phone to maybe 15+ different call

  • Set sample rate to 96 kHz in iMac

    If I go to Applications>Utilities>Audio Midi Support, I can set the Sample Rate to 96 kHz, but in fact the Sample Rate is back at 48 kHz next time I look. Question: How can I get the machine to accept and stay at the new sample rate of 96 kHz? Robert

  • [REQUEST] VBIOS / UEFI GOP R9 280X GAMING 3G

    Hi, I would like to request for a UEFI bios S/N: 602-V277-28SB1311051258 Bios version: TV277MS.330 Link to current vbios: _https://www.dropbox.com/s/c3uortr2u3wg1r5/R9-280x.rom Thanks in advance!