WRT54G Wireless router works on desktop, but not laptop

I have a WRT54G wireless router with version 1.00.4
It works on my desktop, I can log into the net no prob
My laptop however (dell w/ windows xp) does not even recognize it.
Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
My desktop is windows xp, and so is my router.
Any helpwould be greatly appreciated.

i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
1.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
2.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
hope this will help you...
~ lyf_R_foeittee ;o) ~~

Similar Messages

  • Router works for desktop, but not for surrounding laptops.

    The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

    Are you able to see your router's network  name on your laptop? If yes, then follow the below mentioned settings.
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • LR4 upgrade license key works on Desktop but not Laptop?

    Hi,
    I had a fully licensed copy of Lightroom 3 running on my desktop machine (iMac). Once LR4 was released, I downloaded LR4 on that machine to use on a "trial" basis while waiting on my boxed copy of LR4 (upgrade version). Once I get my boxed copy of LR4, I entered the upgrade key from the LR4 box into Lightroom, and (as expected), the software asked for my "previous version" key since what I entered was an upgrade key rather than a full key. I noticed that it pre-populated my LR3 key (I suppose since a licensed version of LR3 had been running on that machine previously). All was good - it took the key and enabled the software.
    So far so good.
    Now, I just bought a new laptop (MacBook Pro). This machine has never had LR3 on it. I installed LR4 and started using it on a trial basis same as my desktop. Once I got my boxed copy of my LR4 upgrade, I enter the key from the LR4 box into Lightroom, and like on my desktop it asked for the key from my "previous version" of Lightroom. Same as before. Only this time the LR3 key was not pre-populated (I suppose since LR3 had never existed on this machine).
    Now, the problem is that when I enter my LR3 key (in conjunction with my LR4 upgrade key) on my laptop, it does not take. There remains a big "X" to the right of my key as if the key is invalid. I have triple checked the value of the key (it is the Serial Number from my LR3 boxed copy) and it is correct, and it is the same one that worked on my desktop.
    Questions:
    - Anyone else know what could explain this?
    - Do I actually have to have an installed version of LR3 on my Laptop in order to use the upgrade key to enable LR4? Or should I just be able to have only LR4 installed, and enter both my LR3 (full) + LR4 (upgrade) license keys? Hopefully the latter..
    - Any other suggestions?
    Thanks
    Chris

    Please disregard.
    It just worked all of a sudden (copying and pasting same S/N, so I don't know what changed...).

  • I installed the WRT54G Wireless router on my desktop and...

    I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months.  Last week I uninstalled Norton Internet Security and installed ESET Smart Security.  Now my desktop cannot get to the internet and the advisor says it does not detect a router.  But my laptop says it's connected to my network and I am able to use the intenet on it.  The router itself has all of the correct connecions and the appropiate lights are lit.  Could the ESET Smart Security Software have messed up my router firmware.  Please advise.

    there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection.  its becomming very annoying.  i have asked my cable company to replace my modem, which they did and that didn't even help.  last year i bought a new linksys router thinking it would solve my problem back then.  it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems.  soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore.  Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself.  i give up.......i  have 2 pieces of crap routers for sale cheap......any takers?  dont waste your time

  • Tbird will not send. unnown error. works in safe mode. turned off firewall and still does not work. works fine on desktop but not laptop

    cannot send on laptop. desktop, with same settings, works fine. getting unknown error on send. please help. here is the setup from the help function.
    thanks,
    tim
    WARNING:
    This contains sensitive information which shouldn't be forwarded or published without permission.
    Application Basics
    Name: Thunderbird
    Version: 31.4.0
    User Agent: Mozilla/5.0 (Windows NT 5.1; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
    Profile Folder: C:\Documents and Settings\Tim\Application Data\Thunderbird\Profiles\dhtmqpol.default
    (Local drive)
    Application Build ID: 20150109111741
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Memory Use: about:memory
    Mail and News Accounts
    account1:
    INCOMING: account1, Tim Corey, (imap) imap.gmail.com:993, SSL, passwordCleartext
    OUTGOING: smtp.gmail.com:465, SSL, passwordCleartext, true
    account2:
    INCOMING: account2, Local Folders, (none) Local Folders, plain, passwordCleartext
    Crash Reports
    Extensions
    Important Modified Preferences
    Name: Value
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size_cached_value: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    extensions.lastAppVersion: 31.4.0
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d10: 3
    gfx.blacklist.layers.direct3d10-1: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.layers.opengl: 3
    gfx.blacklist.stagefright: 3
    gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
    gfx.blacklist.webgl.angle: 3
    gfx.blacklist.webgl.msaa: 3
    gfx.blacklist.webgl.opengl: 3
    mail.openMessageBehavior.version: 1
    mailnews.database.global.datastore.id: 7bba5461-432a-473f-a4e4-9a009dfee73
    mailnews.database.global.indexer.enabled: false
    network.cookie.cookieBehavior: 2
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1375374210
    places.history.expiration.transient_current_max_pages: 78086
    plugin.importedState: true
    privacy.donottrackheader.enabled: true
    Graphics
    Adapter Description: Mobile Intel(R) 945 Express Chipset Family
    Vendor ID: 0x8086
    Device ID: 0x27ae
    Adapter RAM: Unknown
    Adapter Drivers: igxprd32
    Driver Version: 6.14.10.4926
    Driver Date: 2-15-2008
    WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    AzureCanvasBackend: skia
    AzureSkiaAccelerated: 0
    AzureFallbackCanvasBackend: cairo
    AzureContentBackend: cairo
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 0
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use
    NSPR
    4.10.6
    4.10.6
    NSS
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS Util
    3.16.2.3
    3.16.2.3
    NSS SSL
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS S/MIME
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC

    Thanks for the reply. here is the behavior for all steps:
    1. use oper. system safe mode: it works, I can send email
    2. no oper. sys. safe mode, t'bird safe mode: cannot send mail
    3. no oper. sys safe mode, no t'bird safe mode, all addons disabled: cannot send mail.
    It only works when i use oper. sys. safe mode.
    Addons for t'bird were enabled in this test.
    (Not using T'bird safe mode either in this test.)
    Use BitDefender antivirus, which does not have a setting to turn on/off email scanning. Should I contact BD support? (it seems to point to BD as causing the problem. Interesting that I don't have this problem on 2 other desktops, only the laptop. And in the past, T'bird worked on the laptop. I have tried uninstall and reinstall, but mozilla is SAVING all my account and other info, so I cannot do a clean install. it seems to me that if I could do a clean install, it might work. Any idea how to remove all the data and uninstall?
    thanks,
    tim

  • Plugin works on desktops but not on laptops

    Windows XP
    CS2
    It makes no sense for it to just not work on laptops, but this is the pattern I've seen so far. When it errors out on the laptops, I get a "Dr. Watson" error: "InDesign.exe has encountered a problem and needs to close..." When I look to see what the error report contains, it mentions "AppName: InDesign.exe AppVer: 4.0.5.688 ModName: widgetbin.dll ModVer: 4.0.5.688". I've Googled for "widgetbin.dll" but nothing looks relevant.
    I have put in MessageBoxes to see how far it gets in my plugin code. It exits the constructor but does not enter the AutoAttach (AutoAttach being the very next routine in my code that gets called on machines where the plugin does work), so I assume it is not being caused by any code I have written.
    I know this is not much to go on, but I welcome any suggestions.
    Thanks,
    Miles

    I have now installed Visual Studio 2003 on one of the laptops and this did not correct the problem. (I would be using VS 2005 but Microsoft's lousy wizard does not completely convert the 2003 project; it leaves errors including "external symbol not defined" or some such, so I got lazy and stayed with 2003).
    Anyway, I've stepped through the code on the laptop and it apparently gets caught when it tries to open an ADODB connection. I am using a Database class that #imports msado15.dll (this file exists in the same location on both machines), only because I found it easier to integrate into my plugin project than say, CDatabase, or System.Data namespace. The "m_Cnn->Open" in Database.cpp executes just before the comutil.h code, which is where it breaks on the laptop:
    Database.cpp
    bool Database::Open(char* UserName, char* Pwd, char* CnnStr)
    try
    HRESULT hr;
    hr = m_Cnn.CreateInstance( __uuidof( ADODB::Connection ) );
    m_Cnn->Open(CnnStr, UserName, Pwd, NULL);
    comutil.h
    inline _bstr_t::_bstr_t(const char* s)
    : m_Data(new Data_t(s))
    if (m_Data == NULL) {
    _com_issue_error(E_OUTOFMEMORY);
    On the laptop, it just enters "inline _bstr_t::_bstr_t", throws an Access Violation error, and then goes into disassembly. When comparing the variable values in the Autos window between the desktop and the laptop, everything looks the same up to and including the line where it breaks. I can't see any difference. For example, the previous line in Database.cpp, "hr = m_Cnn.CreateInstance( __uuidof( ADODB::Connection ) );" returns a "success" value on both machines.
    Still lost,
    Miles

  • Dynamic Parameter List works on desktop but not when run on Crystal Server

    Hi,
    I have a report, and the database command query takes one parameter ({?Year}. There is a second parameter used for a record select which is a dynamic paramenter list (multiple select, required). When running the report from Crystal Reports 2008 on my desktop, it first prompts for a year, and then once that is entered, it will come back with the list (of Companies) to select from. It works very smootly and as desired.
    But when I load this report to Crystal Reports 2008 Server, it will ask for the year (which is a static list), and this is good, but then it comes back with an empty dynamic select list on the next screen.
    Are there any special caveats that I need to be aware of in regards to dynamic lists when running from the CR server?
    Thanks!

    Hi Pat, 
    This should work but a couple of things to check: 
    1)  Are the two parameters linked to the same database?  If the parameters are linked to fields from different tables in different databases then you need to make sure you set the Database Configuration and have the report log on to both databases. 
    2)  Are Crystal Reports and Crystal Server the same version?  I had problems with parameters after we upgraded to 2008.  We had to install the latest service packs for both Crystal 2008 and the Enterprise Server.  Then we installed Crystal 2008 on the same machine the Enterprise Server was on.  Crystal Reports and the Enterprise Server share some common files.  Some of those files were updated for Crystal but not for the Enterprise Server yet.  Once we synched them our reports have run fine. 
    Good luck,
    Brian

  • Same link works on desktop BUT NOT on ipad -Help pls!

    Hello,
    I have created ONLY a desktop version of this site, www.frabricci.ca. When I check the link to the clients instgram account (seen on the home page instgram icon & last paragraph of that page, as well as last paragraph on contact page), its works on desktops and on mobile (iphone), yet when viewing the site on an ipad the link does not work. Confused to why this would happen as I've only created one site with the same link - HELP PLEASE!

    Hi
    I tried to check instgram account link from home and page and it works on iPad.
    Can you please let me know the browser details and OS details on iPad that you are using , also please check with different browser.
    Thanks,
    Sanjit

  • Printer works for ipad but not laptop

    My printer works fine with my ipad but stopped working with my laptop. I have windows seven. I put the IP address in the search bar and went to the hp site. I tried to print a page from there and it worked fine. But I can't get it to work on any other site or for WORD.

    Hi Beckyls45,
    Welcome to the HP forums!
    I'm sorry to hear you haven't been able to print from your laptop recently, but I'd be happy to have a further look into things and see if I can help
    Which model HP printer do you have?
    Since you can get to the printer's Embedded Web Server (with the IP address in the address bar) you're still connected, but something seems to be blocking communication. I will suggest that you start with downloading and running the HP Print and Scan Doctor, and follow any diagnosis it may have to offer. If that says everything is fine or isn't able to resolve the issue for you, please just let me know.
    Hope to hear back from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HELP; wireless router working on iMAC but SUPER SLOW !!

    I have consistently been having problems with my router WRT54G version 5 
    where download speed is very slow, I cannot even watching streaming video 
    without interruption every few seconds. I thought the problem was with my 
    bandwidth speed so today I upgraded my plan with my ISP and they told me to 
    do a speedtest to check that it was already upgraded.  
    I have a Windows PC located next to the WRT54G version 5.  I attached the 
    PC directly to the modem and got close to the speed allowed by my ISP.  
    I tried the PC on the WRT54G connected via ethernet cable and got dismal 
    rates of 500k to 600k download speed.
    I have an iMAC in another room and also tested it via wireless on the WRT54G.  
    Initially, I got close to the max speed of my ISP.  Tested again a few minutes after and got download speed of 1,300 kbs.  Tested again and got 1,000 kbs. Then now about an hour later, i tested again and got very slow speeds of 600-700k download speed.  Note that I did not move my iMAC from its location while conducting these differnt speed tests.  The problem cannot be with my ISP because directly connecting to the modem without a router achieves the desired download speed.  Its only when I use the router that i get wide results and now, my connection remains intermittent.
    What can be wrong? I dont have any interference.   
    It was suggested to change the channel of the router but must update firmware first.  But firmware does not come in MAC version.
    Any other ideas?  Help ... i am desperate!!  Now i feel stupid upgrading my bandwidth when that doesnt seem to be the problem at all.  

    You can connect your pc to router, download the latest firmware for wrt54g v5 and upgrade it. After upgrade reset router and then reconfigure it once again. Then do the speed test you will receive excellent speed.

  • HP Officejet 6600 - wireless printing works with PC, but not iPad, iPhone or MacBook Pro

    I just purchased a new Officejet 6600.  Plugged it in, set up on the wireless network. Turned on my iPhone and printed with no problem.  I then used the setup disc to setup on my windows desktop.  It works beautifully.  However, now we can't get the printer to print docs from iPad, iPhone, or Mac Book Pro.  The printer shows in the print cue, says it is printing, and nothing. Installed on my Toshiba Laptop. No problem. HELP!! Very frustrating.   Old HP printer worked on the wireless network with all of these devices.  

    Hi helpls,
    I recommend using the following document to get the printer printing from the Windows PC again.
    'Printer is offline' Message Displays on the Computer and the Printer Will Not Print
    This will guide you through the troubleshooting steps necessary to resolve the issue.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HT204387 BOSE Bluetooth wireless headphones work with iPhone but not iMac - Profile issue I assume - but why not!!!!

    I have a great pair of BOSE wirless headphones that connect faultlessy to my iPhone.  I'm very dissappointed however to find that I cannot use the same headphonse on my iMac or my MacBook Air.  I assume it's a bluetooth profile issue but in product utility terms it makes no sense.  Is anyone aware of a way of circumventing this resytiction (e.g. third-party product, mac setting,...etc)?

    Yes. This has to be the 8.xx iOS.
    I have experienced this since purchasing the 6+. Now, I attempting to pair the phone to Sync in my Ford F150, it
    can't find the phone. I go through any number of attempts: rebooting the phone, finding a bluetooth device on Sync, etc.
    Most of the time it shows a "cannot find bluetooth device". Or the Sync shows a pairing number to type in the phone in order
    to pair, but the iPhone doesn't see Sync, so nothing can be done.
    Sometimes, and I mean only sometime, the device is paired by itself. (On sync, "choose input: usb or bluetooth" and trying this
    several times, Lo and Behold.....wait for it......the iPhone 6+ connects!
    This is not what I had, an iPhone 4S, that one pairing, and always paired. (truck off, crank and instantly paired). The old days!
    I have check Ford to look for an update. I have the latest from 2012. The final one for my truck model year.
    This version of iOS needs works and must be updated again.
    I don't know who to contact at Apple but the mods here don't say how to do that.  It another Apple waiting and see.
    If I find a solution, I will post it immediately. I hope you will post as well. Thanks for reading.
    M.

  • Why does ADE work on desktop but not Kobo?

    My wife bought a Kobo touch mainly to read books borrowed from the library. The process of downloading, converting and then transfering an eBook into the Kobo is pretty absurd in my view, but for the first few books it did work. Then the most recent book said the book "wasn't authorized with this Adobe ID". I thought that was strange because the Adobe ID shown in the account setting was her ID.
    So I deauthorized her Adobe ID and tried again. We set up the Kobo from scratch and it said exactly the same thing.
    When viewed inside Adobe Digital Editions, the book shows up as being valid. The expiry date is three weeks in the future. It can be opened and read. It shows up listed in the eReader section of ADE. But on the actual device the book shows as invalid.
    Curious, I did a factory reset of the Kobo. Same thing.
    Now getting really frustrated, I did another factory reset and created my own account. I borrowed a book from the library, downloaded it and authorized it with ADE. It shows that the book is valid. It can be read on the desktop version of ADE. But when loaded onto the Kobo, it says the book "isn't authorized with this Adobe ID." Again I double checked the ID and it is correct.
    I'm using a Mac Pro. She's using a 27" iMac. Here's a screenshot showing the ADE info:
    There is clearly no lock, nor problem with number of computers, because I've only authorized the one computer and device. This is getting beyond ridiculous. Does anyone know what's going on?

    My wife bought a Kobo touch mainly to read books borrowed from the library. The process of downloading, converting and then transfering an eBook into the Kobo is pretty absurd in my view, but for the first few books it did work. Then the most recent book said the book "wasn't authorized with this Adobe ID". I thought that was strange because the Adobe ID shown in the account setting was her ID.
    So I deauthorized her Adobe ID and tried again. We set up the Kobo from scratch and it said exactly the same thing.
    When viewed inside Adobe Digital Editions, the book shows up as being valid. The expiry date is three weeks in the future. It can be opened and read. It shows up listed in the eReader section of ADE. But on the actual device the book shows as invalid.
    Curious, I did a factory reset of the Kobo. Same thing.
    Now getting really frustrated, I did another factory reset and created my own account. I borrowed a book from the library, downloaded it and authorized it with ADE. It shows that the book is valid. It can be read on the desktop version of ADE. But when loaded onto the Kobo, it says the book "isn't authorized with this Adobe ID." Again I double checked the ID and it is correct.
    I'm using a Mac Pro. She's using a 27" iMac. Here's a screenshot showing the ADE info:
    There is clearly no lock, nor problem with number of computers, because I've only authorized the one computer and device. This is getting beyond ridiculous. Does anyone know what's going on?

  • Dial up connection sharing via WRT54G wireless router

    Can someone help me out?  Here's my issue
    I have an XP based desktop computer that connects to the internet via a dial up 56K modem.  I would like to share the connection with my new XP vista laptop using the wireless adapter on the laptop.  I have a Linsys WRT54G wireless router.  The desktop pc with the connection I want to share is connected to the router via ehternet cable.  How do I go about configuring the laptop wireless & the router to allow for this.   I assigned a static ip 192.168.1.253 to my desktop from the router (192.168.1.100).  When I enable ICS it changes the ethernet to 192.168.0.1.

    Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
    You said you reset the router to factory defaults and that it was working better.  Did the download connection speed through the router go to 8-9Mbits/sec ?  If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right.  If you still have this slow speed problem, then please post the following info:
    1)  Your ISP (internet service provider)
    2)  Your modem model number and version.
    3)  Open your router's setup pages, and go to the Setup tab.  List all your settings in the "Basic Setup - Internet Setup"  section.
    4)  List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
    After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment. 

  • Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

    I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest).  I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work.  (It worked just fine with my Netgear router until that router recently died.)
    When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process:  IP Address.  I have the set-up for the IP address to be assigned automatically by the router (which is set for  DHCP Server enabled).
    I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that.  I've had to re-establish my laptop set-up so many times I wanna scream!
    Are the Xbox 360 wireless adapter and the WRT54G even compatible?  If so, what am I missing here?  I'm not too technical and obviously in over my head, but this ought not be that hard.
    Please, please do NOT respond unless you KNOW the answer!  I don't mean to be curt, but I'm over / past "suggestions to try."
    Thank you VERY much for your time and consideration if you can help me.

    I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Maybe you are looking for