WRT54G- Won't accept my new modem and I keep getting a strange error message

On Christmas night, my modem crapped out forcing me to purchase a new one the next day. After getting it online, I attempted to hook up my router. However, I could not connect to the internet through it. I figured it must be because the IP address must have been changed and it needs to be reconfigured.
So, I tried completely re-installing the router but I still could not connect to the internet. When I went on the web browser based page for the router to try to configure it, I got an error message stating that another PC on the network has the IP address. I did have a second PC hooked up to the router at the time; I unhooked it and tried to at least get the router to configure to one of the PCs.
Yet, again, I was getting an error message saying: "May be route already exists".
Because of this, I cannot register the new IP address and still cannot connect to the internet through my router. Anyone know what I need to do?

Who is your Internet Service Providor? Do you have a static IP Address provided by your ISP?

Similar Messages

I am trying to load the new itunes and I keep getting a runtime error R6034

I am trying to load the new itunes and I keep getting a runtime error R6034

The new Itunes software update is flawed! I had the same issue. You need to uninstall Apple components, then reinstall. Go to this link for instructions. Takes about 20 mins but works!
http://support.apple.com/kb/HT1923

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

We got a new modem and i keep getting disconnected!

We moved to a new house and we still have the same ISP but we upgraded our internet to a faster connection. So the cable guy came, installed our cable and internet and we got a new modem. He connected our WRT54G Ver. 6 router to the new modem.
Our new internet connection is fast, at 10mbps, but the problem is it keeps disconnecting us. I don't know if the problem is the modem or the linksys router.
I don't know much about networking so please help =(

You can connect the computer only to the modem and check the connection is steady or not. If it is steady then try to upgrade the fimrware of the router .
Before doing the following steps, you have to connect the modem to the
router's Internet Port and the computer to the Ethernet Port Number 1.
Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter.
When
it prompts for the username and password, leave the username field
empty and provide password as “admin "" all in lower cases and then
click on ok. Now click on the 'Administration' tab- Then click on
the 'Firmware Upgrade' sub tab- Here click on 'Browse' to select the
extracted/uncompressed .img or .bin file and click on "Upgrade"
After doing the firmware upgrade you have to reset this router again
for 30 seconds.
Reset the router
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button.
Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter.
When
it prompts for the username and password, leave the username field
empty and provide password as “admin "" all in lower cases and then
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “.
Click on the Save Settings button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
- Click on clone your PC's MAC button and then click on the Save
Settings button.
To configure the router for Wireless.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here Wireless Network mode should be mixed
- Provide any name in the Wireless Network Name (SSID) box, all in
lower cases without any spaces in between.
- Set wireless channel to 11
- And wireless SSID broadcast should be Enabled and then click on
save
settings.
Please make a note of Wireless Network Name (SSID) as this is the
Network Identifier.
For Wireless Security : -
Now Click on the Sub tab under Wireless > Wireless Security.
Change the Wireless security mode to WEP
Encryption should be 64 bits.
Leave the Pass phrase blank, don't type in anything.
And under WEP Key 1 type in any 10 numbers please.
Click on save settings.
Please make a note of WEP Key 1 as this is the Security Key for the
Wireless Network.

Downloading OS 5.0.1 and I keep getting a (-5000) error message

I am trying to update my iPhone 4 to the OS 5.0.1 and I get this error message... "An error occurred while backing up this iPhone (-5000). Would you like to continue to update this iPhone? Continuing will result in the loss of all contents on this iPhone."
Don't want that! Anyone have any ideas?
Thanks!

I had the same issue. I closed iTunes, restarted the computer and then tried again. This time it would sync. Another thing I tried was switching USB ports I was connecting through.

I cannot restore my ipad. I have tried all I know to do and I keep getting the same error message. That it cannot be restores (1).

Can someone give me tips on how to restore my ipad. It will not restore no matter what I try.

See this support document for help with restore errors. Resolve iOS update and restore errors
The problem is that most of the time the error 1 is generally a hardware error. However, follow the instructions in the support document and you may get by.

My iphone 4 is refusing to accept any charger and just keeps giving me an error message when i plug it in.

So i tried to charge my iphone yesterday and i got an error message saying "Charging is not supported with this accessory", i then went and bought a new charger and tried it but keep getting the same error message.
I don't know what could have caused this but if anyone has a solution or help in anyway i would appreciate it.

Yes its been cleaned out, i have tried many different things to try an fix it but still nothing. i just can't understand how it can be working perfect 1 minute then not working the next minute. seems to be a common problem with no real solution.

I am trying to download the Facebook app to my new iPad and I keep getting an error . It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url

the iPad is totally new to me. I can't seem to do anything with my Apple ID. As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error. It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url. Cancel or Retry. I have no idea what I'm doing wrong. Any help would be greatly appreciated.
I'd also love to know how to get rid of the old owner's name, which was Mike - I'm Ann

Wow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings.....

My itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

my itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

I have an Airport Extreme, it's only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again."

I have an Airport Extreme, the light is only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again." I've tried my iphone 4 with the same result. I've tried the utilty on my pc and same result. The airport is producing a great wireless signal and working to all devices. I really just want to get in and set the password.

eddiedaly wrote:
I have reset several times with no success.
When you did those resets, did you continue to hold in the reset button until the status light blinked several times? If you didn't, then you didn't do a full reset.
Here's what I do to reset an AirPort base station: I unplug it, press in the reset button, then, while continuing to hold in the reset button, I plug it in. (Yes, doing this can be easier for people with more than two hands!) I then watch the status light and wait until it flashes rapidly several times.
I have a Time Capsule that I couldn't configure at one point. To recover from that I had to unplug it for many hours. You might try unplugging your unit overnight.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your original message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

I tried to download the new update, and I keep getting an error message, that it cant be downloaded!

I tried downloading the new update, and I keep getting an error message that it can't be downloaded!

Apple Store Tel: 1-800-692-7753
Best.

I attempted to install the new version of itunes and I keep getting a R6034 error

I attempted to install the new version of Itunes and I keep getting a R6034 error. What do I do?

Hi davemac123,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

I tried to download the new itunes and i keep getting a message that the feature i am trying to use its on a network resource that is unavailable

i tried to download the new itunes and i keep getting a message that "the feature i am trying to use its on a network resource that is unavailable

Which particular .msi file does the message go on to say can't be found? (Several different .msi files can be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

WRT54G- Won't accept my new modem and I keep getting a strange error message

Similar Messages

Maybe you are looking for