WRT54G wont work for both internet and xbox 360

I bought the Linksys WRT54G so I can play my Xbox 360 and be on the Internet at the same time. I am not using it wireless meaning that i do have ethernet cords plugged in for both my internet and my 360. When i play my 360 it kicks me off the internet and vice versa. Any help?

Access setup page....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
  primary dns :- 4.2.2.2
  secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Similar Messages

  • How to show one prompt that works for both Graph and Table views?

    Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
    Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
    Too much data to use the slider because it will not graph.
    Page prompt does not allow user to switch dates easily.
    Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
    Saw something about Master Detail linking, but does not appear to work with graph prompts.
    How would the analysis be configured to show one prompt that works for both the Table and the Graph?
    One prompt would change both the table and the graph.

    Master Detail Linking almost works.
    Table view can show all the results without error.
    Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
    Is there a way to set the initial Master Detail Linking value to the top sorted value?

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • Need help for creating sharepoint sites for both internet and intranet users

    We would like to know what is the best approach to create SharePoint sites for our customers(internet users) and internal employees(intranet users) on the same SharePoint server. Here is the scenario:
    1) A customer posts a document from internet.
    2) This triggers a approval workflow that can only be accessed and executed in the intranet environment. This approval process requires approval's possible modifications to the customer's document.
    3) We would like the customer not to able to check the approval state and the modified document until the document is fully approved and finalized.
    We are pondering if we need to create two sites, one site for customer and the other site is for internal approvers. Or one site is possible. It also looks like we need to somehow copy customer's original document to intranet site and triggers the workflow.
    Any design ideas are helpful. Thank you advance!

    Hi Jason,
    Though it is perfectly possible to have both intranet and internet on the server, it is not a recommended practice. Having both on the same server would have multiple problems, instead me detailing it out, here is a forum thread on which Trevor had given
    enough reasons -
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9b550c33-6f5f-4cd9-8762-8ff389b747d9/sharepoint-2013-one-farm-to-host-intranet-extranet-internet?forum=sharepointadmin
    If you have valid reason to go with single server, then you can also explore email enabled lists as one option and another one would be using custom sharepoint designer workflow.
    you can also try using event receivers to send documents to intranet site from internet site, process everything and update the document in the internet site.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if the reply helps you

  • Megacom not working for both LD and Int'l

    I got the same issue described here https://supportforums.cisco.com/message/311063#311063 but only differences are my setup is using CCM 4.2 and Cisco 3845's.
    To make a LD call to work, I got to set the "Called party IE number type" under the GW config to National; and
    To make an Int'l call to work, I got to set this value to International.
    If I leave everything default, i.e. Cisco CallManager, only LD works.
    Basically, I couldn't make both LD and Int'l to work. It's either one way or the other.
    Any workaround to make both to work would be greatly appreciated.
    Thanks,
    Kevin

    Both device has automatic download on.

  • Does passthrough work for both HTTP and HTTPS and back?

    I have pass through configured correctly for HTTP on S1WS6.5 to S1AS7, and it works correctly.
    When a secure page is hit, an redirection loop starts between the Web Server and Application Server.

    Thanks Mike, I assume it is so, then.
    Best,
    fabio

  • Alias-like file on a CD that'll work for both Mac and PC?

    Hello,
    I want to write a data CD (using Toast 6) using the format "Mac & PC" that has an alias-like file as one of the files that points to another file also on the CD. And I want the alias-like file to work on a PC as well as a Mac. Possible? What? How?
    Thanks,
    John.

    Sorry for neglecting this thread.
    I haven't tried any of the suggestions because 1) I'm not brilliant with the terminal and 2) I don't have a PC to try this on -- I was hoping to find a sure, reliable way of doing it without the need for testing it.
    I don't know whether Toast picks up hardlinks correctly, one could try once and possibly be able to use it instead in step 3.
    Are hard links and normal files not indistinguishable? In fact one in the same thing? Are normal files not a block of data with one hard link pointing to that data -- that's what files are I think. I could easily be wrong but I think that's the situation. If that's so then hard links will defininely work because files work. I think hard links are the most likely to work. And I reckon, if hard links are one in the same as files, then Toast should have no problem.
    I can't test it though, and because I can't be sure, I'm probably just not going to do it -- burn the PC disk (for someone else) without any alias type file attempts.
    Thanks very much for all the suggestions.
    John

  • Can one license work for both PC and Mac?

    A couple years ago I bought CS5.5 for Windows. I'm about to get a new computer, but it's a Mac; I'd really like to be able to continue working with the CS on the new computer, but the purchase (and download) is clearly the Windows version of CS5.5. Is there any way I can obtain the license (and download) of this product for a Mac? I don't want to switch to CC, since CS5.5 works just fine; are there any options for me? Thanks in advance!

    Unfortunately you are one version too late to get the option to switch platforms.  Switching platforms is supported for only the latest release version, which is currently CS6.  Here is a link to a document that explains the policy:
    Order product | Platform, language swap

  • If you purchase pages can the purchase work for both macair and iPad

    When you purchase pages, can that purchase be placed on mac air and your iPad? If yes how is it done?

    Nope.
    The products are different, as you are talking about using two different operating systems, OS X and iOS. Each version of pages only operates on the operating system it was designed for.

  • Can I use a Time Capsule as a HD for my PS3 or Xbox 360?

    Hi guys, I need some help... I'm thinkong buying a TimeCapsule,
    but I want to know if I can use it as a external Harddrive for my
    PS3 and Xbox 360... (they have less than 12 Gigabytes left)
    but I dont want expand their capacity by buying each one a HDD...
    thats why I want a time macine and use it as HDD for all my Devices....
    please help!

    No.  A Time Capsule has no media serving logic.

  • I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

    I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate.  iPad 2, iOS 8.3

    This is an ongoing problem as you will see by searching the forum. 
    Out of curiosity, do you have 2 step verification enabled?  It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

  • TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

    hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

    They are not a supported carrier. You'll have to take it up with them.

  • I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

    I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
    I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
    My little memory stick uses MS-DOS and it works on both mac and windows.
    Please can you just tell me a little about each and suggest which one to use.
    I know how to change it once you tell me so don't waste your time writing about changing it.

    Will any of them cause damage to the files on the hard drive?
    WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
    If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
    The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

  • I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

    i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

    Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

  • My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    Basic troubleshooting techniques for any problem
    Restart the computer = joy?
    Reset the router = joy?
    Restart the computer in Safe Mode = joy?
    ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
    ÇÇÇ

Maybe you are looking for