WRT54G2 - can no longer access router webpage after changing setting

hello i've started gaming again so i ended up configuring a static IP using the network and sharing centre in the control panel and i'm online with the fixed IP, and i had some ports forwarded in my router web page and everything has been working great the past 2 days. however, earlier this morning i could not join any games all of a sudden even tho i played 1 when i just got up, so i went to my router home page and changed a setting, i'll link a screen shot, i'm pretty sure i just changed the local IP address from 192.168.1.1 to 192.168.1.10 (which is what i set it as 2 days ago in the control panel network tcp ip4 thing) it's possible i modified somethin in the dchp server section but i was nearly convinced that was disabled anyways. http://screenshots.portforward.com/routers/Linksys/WRT54G2/Basic_Setup.htm is the link if it helps
anyways like the thread title says, i can no longer access the router web page which was 192.168.1.1, instead all i see is a sickening image about something called internet information services!? talk about a weird thing to see when i expected to see my router web page. but it's related to microsoft so it's not malacious at least. any ideas on how i fked up so bad and how to fix it, so i can see the router web page again, and edit the settings back to the way it was this morning

I can't access either and c ant get a connection plugging in my laptop I got a new modem and I'm trying to configure my modem to my wrt54g2 and lost
Hi randallel, you may have to do a hard reset before reconfiguring your router with the new modem. To do the proper reset, please press down the reset button for 30 seconds while the power is on. Release the button and unplug the device. Plug it back in and reinstall the settings based on the type of Internet connection that you have. Hope this helps.

Similar Messages

Can No Longer Access Router

Yesterday i was playing online on my Xbox 360, and was disconnected from the internet. I came downstairs to reset router/modem, once doing so i went into the router settings for my LinksysWRT54G. My modem by default uses the 192.168.1.1, so my router was 192.168.2.1... So i powercycle, log into router settings through 192.168.2.1 and start setting up my port forwarding for the xbox ports. Saved Settings, and the page would not load to say "Settings Saved". Closed the window and now my pc says no internet connection. I had to create a VPN broadband connection to even use the internet on my pc. I can no longer log into 192.168.2.1 for my router, nor can i access 192.168.1.1 to even get into my modem settings.. I'm using windows 7, and the automatic troubleshooting guide tells me to powercycle my modem. My xbox can still see my wireless network "linksys" but will not connect to it, even with the VPN connection i am still hooked though my router and modem.. Im afraid that my router just out of nowhere "died".. any help or suggestions would be appreciated.
Solved!
Go to Solution.

Let me know the IP address on the computer from the router? To check the IP address that you are getting from the Router...
You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
There check the IP address and Default Gateway under LAN….
If it shows the same IP address that you have changed (192.168.2.1) then try to ping that IP address. Let me know the responses that you are getting?

Once Audio/Video has been merged, I can no longer access the video's source setting on some clips

Hi.
Shot Scarlett, doing a pass in RedCineX, and bam, I can no longer reload the RMD files on some of the clips in premiere.
In the timeline, if I right click the video, "source settings" is clickable, but doesn't do anything.
If I reveal the merged file in the project, the "source settings" option is greyed out.
If I click the original r3d file in the project, I CAN access source settings, but reloading the RMD does not modify the merged clip.
What's really bothersom is that this is only affecting about 1/2 my merged clips, all created at the same time.
I've unlinked, relinked....I've rain danced...I've swore...nothing works....any help?

I cannot help with this problem (not having any RED media myself), but if your media was shot at true 24 fps (not 23.976), I could use another pair of eyes on a particular issue that might also affect you.
http://forums.adobe.com/thread/1385093?tstart=120

I can no longer access tesco bank after Safari upgrade

Since the recent safari upgrade when I attempt to login to my tesco bank credit card account I simply get a balnk white screen. Tesco say they have had other customers with this problem but cannot help which is nothing unusual!

I have the same problem with Tesco and had a similar one with Nationwide. I've just downloaded the Thunderbolt Firmware Update from the App store and Nationwide is now ok but not Tesco. Could be that Nationwide have done something because I managed to contact somebody there by email who was looking into it. All I got from phoning Tesco was that they knew there was a problem but hadn't managed to fix it. Suggested I download Google Chrome. Also that it had been affected by another update to the software over the weekend. Very frustrating as you can't email anybody at Tesco and have to phone an 0845 number to 'find out' what is going on. No message on their website to let you know there is a problem and that they're doing something to resolve it.

Can no longer access Netgear Router

We have been using a Netgear MR 314 router for years for both Wireless and Ethernet wired activity on our G4, G5 and MacBooks. We recently upgraded to Safari 4.0.1 on all 3 machines. Internet, file sharing, screen sharing, home networking all work just fine.
What mystifies me is that I can no longer access router data (192.168.0.1 + password) to do whatever on any of the machines with Safari 4.0.1. I click the tabs on the router (Wizard, Advanced, Maintenance) and nothing happens beyond the 'Welcome' screen. In order to get access to the router I have to use a Dell XP machine. Then I can get into the router with no problem. It's not a big deal, but any ideas?
Yes, yes - all of the MAC ID's for all computers and wireless adapters are still in the router configuration table as tested today with the Dell. So, again, any ideas ??
Thanks

From what you describe, it seems that Netgear deliberately chose to make their web-based management system for their routers focused on Windoze and it's browsers, so either they're using non-compliant HTML, or they're browser sniffing and rejecting anything that isn't IE or Firefox on Windoze. You should complaint to them and let them know how upset you are. There's really no excuse for that, especially since they don't disclose it prior to or after you buy it, and it just shows how lazy they really are when designing these systems.
You should open Safari's Preferences>Advanced window and enable the Debug menu, then go to that menu on the menu bar and use the User Agent sub-menu to select a different browser (Firefox for Windoze) and see if that will give you access again.

I can no longer access listing variations in Ebay after the upgrade

After upgrading my Firefox on 3.01.2012 I can no longer access listing variations or change prices on these Ebay listings. Other edits within the site seem unaffected.

Well, just imported all of my settings into Google Chrome. Been nice knowing you Firefox.

HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6

i can no longer access itunes store after iso 7 was installed... can i go back to iso 6

No you can't.
Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any data settings. When your iPad restarts see if you can access iTunes.

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

Hi
After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
All other features seem to work... only opening the iTunes store is failing..
I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
Please help

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

ddmathias, I want to make sure all services are working correctly on your phone. What GPS services were you using before the update happened? What kind of issues are you having with the services? Do you get any kind of errors? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

After installing Mountain Lion two drives on my network cannot be accessed. I am using Parallels to utilize QuickBooks ERP. The programs and data are on the drives that I can no longer access. Suggestions?

After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?

Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work.

HT2500 After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???

After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first.

After upgrading to Maverick, I can no longer access iTunes Store.

Hi,
After upgrading to Maverick, I can no longer access to iTunes stores. The layout for Mac AppStore also doesn't display properly. Perhaps the most annoying part is when I need to access secure website (even google.com), where I need to authorize the certificate. My current connection is behind proxy, but have no issues on all this issues before upgrading to Maverick. Please assist.

Hello segordon21,
Thanks for using Apple Support Communities.
To move voice memos to your computer please follow the steps from the iOS 8 Help below.
Move recordings to your computer
You can sync voice memos with the iTunes library on your computer, then listen to them on your computer or sync them with another iPhone or iPod touch.
When you delete a synced voice memo from iTunes, it stays on the device where it was recorded, but is deleted from any other iPhone or iPod touch you synced. If you delete a synced voice memo on iPhone, it’s copied back to iPhone the next time you sync with iTunes, but you can’t sync that copy back to iTunes a second time.
Sync voice memos with iTunes. Connect iPhone to your computer, then in iTunes select iPhone. Select Music at the top of the screen (between Apps and Movies), select Sync Music, select “Include voice memos,” and click Apply.
Voice memos synced from iPhone to your computer appear in the Music list and in the Voice Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos app on iPhone, but not in the Music app.
Move recordings to your computer
Take care,
Alex H.

HT4314 after i reset my apple id, i can no longer access my game center

Hello,
After I reset my apple ID, i can no longer access to Game Center. can you help me understand what happenned. thank you.

What happens when you tried? Did you try to reset your iPod? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. Then try signing out and back in again with the new credentials.
Are you sure you were using the same account in Game Center as the Apple ID you changed the password for?
If nothing else, try a reset of all settings. To do this, head to Settings -> General -> Reset and tap Reset All Settings. This does not erase any of your synced/downloaded content.
B-rock

WRT54G2 - can no longer access router webpage after changing setting

Similar Messages

Maybe you are looking for