WRT54G2 connects IM clients but browser does not work.

Hi,
I purchased this router last week and it had been working perfectly. All of a sudden today y lost my VPN connection and all that was connected was the msn and skype, nothing else works. None of the computers work either wired or wireless.
When i connect the PC directly to the cable modem works perfectly. When i connect the router back, does not work.... Any ideas??

Does the connection from router work without VPN...?
Does Modem work with VPN or without VPN...?
Make the connection (M-R-Comp) again and power cycle the complete network and check.

Similar Messages

  • HT3819 I have Yamaha a/v receiver connected to network but it does not pickup my itunes from my Mac computer.  My os is snow leopard.

    I have a Yamaha RX-A2010 A/V receiver which is connected to internt but it does not receive my itunes from my Mac computer.

    Well, I see a few things that can be in the way:
    1. MAC address filtering is really not a security measure since the MAC addresses are sent in the clear (unencrypted) and many devices can have their MAC addresses changed easily with software.  I'd recommend losing the MAC filtering and just use WPA2 and be even more secure than you are currently.
    2. If you disabled the firewalls during the install, that may have been a bad thing.  The installer is supposed to create ports through the firewalls during install, so if they are disabled and later enabled, the ports are not there.
    3. Does your printer show up if you type its IP into a browser?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • " help me please"  I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

    " help me please"  I have Windows 7  32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
    I have to boot with a Windows
    When I use the Mac operating system not have a problem  and DisplayPort to VGA Adapter Working properly
    why does not work with windows ?
    What should I do؟
    I'm grateful to give advice
    tanks
    [email protected]

    Someone in another section answered this. Thanks.

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

    Hi,
    I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though.  Toggling the wifi setting clears
    the issue temporarily but it occurs again.  Running iOS 8.3 now.  This was the case on iOS 8.1 and 8.2 as well. 
    I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
    My router is an EA9200 router with 2.4 Ghz and 5 Ghz.  It is configured with all bands with the same name.
    All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
    My thought is that iphone 6 cannot handle well the moving around between bands. 
    Any thoughts or suggestions would be greatly appreciated.
    Thanks,
    David

    Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on?  This seems to solve a lot of problems.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I'm trying to connect SGE2010 and SGE2000 in a stack but it does not work

    I have just bought 4 SGE switches. SGE2000, SGE2000P, SGE2010 and SGE2010P. I’m trying to connect them in a stack but it does not work. It is possible to connect SGE2010 and SGE2010P in a stack but the other models (SGE2000, SGE2000P) will not connect. I have reset all switches to default and connected the switches in a ring. The 24 ports units has been connected to port 12 and 24 and the 48 ports units has been connected to port 24 and 48The units seem to take the right please in the stack but the 48 units end up with light in all lambs.

    Cane SGE2000/P and SGE2010/P really coexist in a stack?
    According to Cisco’s website coexistence of SGE2000/P and SGE2010/P in a stack is possible.I have read all availably documentation and tried every ting I cane thing of. However I have not been successful in connecting these devises.
    Is there anybody out there who has a stack with both 24 and 48 port SGE devises? I f there is what software version(s) is there installed on the devises?

  • How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

    How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

    http://support.apple.com/kb/TS1538

  • My ipod screen does not light, I can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made it the restoration of production and did not work.

    My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
    Please I need to know what do I have to do.
    Regards

    If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Note that this requires using the sleep/wake button.  If you are not successful then there is nothing else that I know you can do.

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • I use the Icalendar at home, at work, and on my Iphone.  I don't want to have to "sign in" every time I need my calendar.  How do I stay signed in?  I have checked the "keep signed in" box, but it does not work.

    I use the Icalendar at home, at work, and on my Iphone.  I don't want to have to "sign in" every time I need my calendar.  How do I stay signed in?  I have checked the "keep signed in" box, but it does not work.

    Welcome to the Apple community.
    Staying signed in at iCloud.com is not a problem for me. Try resetting your browser or emptying its cache.

  • I bought the last apple wire keyboard , but it does not work with my usb ..

    i bought the last apple wire keyboard , but it does not work with my usb hub why ?
    the only way it works its when connecting it thrue my powerbook usb ...
    the problem is i HAVE TO USE IT THRUE AN USB HUB ... do you think its because my hub is cheap ? 10 $ .... i 've been told that it comes from the fact that i need an auto-alimented usb hub ...?.
    suggestions gentlemen ?

    I have eyes everywhere. Two of them can see the word "Paris", right below your name, at left.

  • AX green light, but airtune does not work

    I just bought an AX. The main purpose is to use airtune and to share printer at home, and to bring it to create wireless network when I am on business trip.
    When I first set up the AX, or later do a reset, the setup program can find AX. I use airport admin utility to set up the following:
    Airport tab:
    Wireless model: join an existing wireless network (wireless client)
    Wireless network: I choose the current wireless network I have at home.
    Internet tab:
    Configure: Using DHCP
    I clicked 'Update' button. The status light became green, but airtune does not work. I did not see the button show on iTune for me to choose the speaker. I went back to Airport Admin Utility, but could not find AX at all.
    I googled for possible solution, and saw concern regarding DHCP, so I tried:
    Internet tab:
    Configure: Manually
    IP address: 192.168.0.30. My wireless router assigns IP from 192.168.0.2 to 192.168.0.33
    Subnet mask: 255.255.255.0
    Router address: 192.168.0.1
    DNS server: 192.168.0.1
    After updating the information to AX, I have still the same issue: green light, but no airtune, Airport Admin Utility cannot find the AX.
    My wireless is a gigabyte. Please help. Thanks.
    Message was edited by: sfmech

    Sadly I can't help, but i can confirm: I am having the same problem. AirTunes was working fine, up until I went away for a month -- have just returned, and now am getting the same problem with TWO Airport Express units, which makes me think it is some kind of software update issue?
    Will keep looking into it, and will let you know if I find anything.

  • I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Maybe you are looking for