WRT54G2 disconnects in sleep mode

Thanks in advance for any help.  My laptop  HP G60-235DX  is connected to my wireless router, which also connects a Mac desktop and another PC destop.  I have the latest firmware, etc. I have tried several suggested changes in the setup page and my connection is frequently lost....sometimes with the router's power button off and sometimes it's still on...at any rate, I always have to unplug the router and plug it back in after 10 seconds and I'll get back on the internet.  And, yes I have also powered down my router and modem several times.
Right now, the only way I can stay on line for any length of time, is to keep my laptop on high performance and that way it doesn't go into sleep mode when I shut  the lid.  It's a good thing I don't need to use the internet outside my home!!!  BTW, I have also changed different settings on the computer like disabling sleep mode,,,etc...but that doesn't work either.
Any suggestions would be greatly appreciated.
JohnRN1

Have you tried upgrading the firmware on your Router. Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you Re-configure all the settings on your Router, Here are some setting which you can set on  your Router and i think this might solve your problem...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • Wifi disconnect at sleep mode

    After upgrade ipad to ios6.1 Wifi disconnect at sleep mode   Whay?????????!!!!!! 

    I had this problem too. Try the following:
    Connect to network.
    Double tap the Home button to access the app list.
    Press and hold, then tap the x on Settings (i.e. close the settings app)
    Switch your iPad off and back on again.
    This worked for me.
    A lot of people are suggesting Settings->General->Reset->Reset Network Settings. Might be worth a try if the above doesn't work, but didn't work for me.

  • Problems with External Seagate GoFlex Firewire Drive Disconnecting on Sleep Mode

    I am Running a 2.8Ghz Intel Core 2 Duo 24" iMac running Mac OS X 10.7.3. I run time machine to backup to an external Seagate 3TB, FreeAgent GoFlex Desk, FireWire Drive. When the Mac goes into sleep mode, the Seagate drive un-mounts. When the Mac wakes up, I get an error that the drive was not properly disconnected and the drive is no longer mounted. The only way I can get the drive to remount, is to remove power from the drive for several seconds and then reconnect it.
    I have seen several people talking about this issue in various forums with many various makes and models of FireWire drives, but I see no answers to this issue from Apple. Does anyone have a resolution to this issue, or are we just stuck with this problem? It is terribly frustrating!!!! The lack of response or interest from Apple is even more frustrating!!!

    Wish I had an answer, or even a clue about this one. I have a Western Digital MyBook Studio that I've had for a fair number of years now and finally had to resort to just plugging it it as a USB device. Since it's only used for Time Machine backups and storing things I rarely need, it's not a huge burden, but I'd love to hear from anyone with a suggestion as to how to fix this. I recently upgraded from a 17" late 2006 iMac to a Mid 2011 21.5" iMac and would really like to go back to FireWire if it's not going to be a big-ole-pain in the hind end.

  • Bluetooth disconnects in "Sleep" mode

    When I wake my MacBook Pro from sleep mode, both my wireless keyboard and wireless mouse do not reconnect... I have to physically turn bluetooth off, then turn it back on to recognize my mouse and keyboard.

    Ditto on this problem for me too. Seems slightly intermittent: probably fails to connect nine time out of ten. Also, nature of fault seems to vary: sometimes BT has turned off completely, other times it's on but my devices just haven't connected.
    Manual reconnection via BT prefs is a pain but only way I've found thus far to reconnect. Keeping BT in Menu Bar helps to speed things up a little.
    Looking forward to a fix.

  • Keyboard and mouse disconnect after sleep mode

    We've been having the following problem lately with our mini: We'll be away from the computer long enough for it to go into sleep mode. But when we wake it, we'll get the screen back and see the mouse pointer on screen, but the mouse will not work and we can't get the keyboard to input anything. There is power getting to the mouse and keyboard, but none of the input is registering.
    The "solution" so far has been to do a hard reboot, which fixes everything, at least until the next time it happens. This doesn't happen every time we wake the computer from sleep mode, either.
    For reference: We are using the Gateway keyboard and optical mouse that came with the computer which the mini replaced. And both of these are plugged into a USB hub, and the hub is plugged into the mini. (So I realize this could be a problem with the hub.)
    Thanks!

    LucysDad...
    Is the hub self-powered (with a transformer to plug in) or buss powered? Buss powered units are no good IMHO. Must have powered ones, when it comes to hubs.
    What brand? Port Authority seems to be tops in my book. I don't know whatever happened to Belkin but they went sour for Mac use in or around 2000. Something happened to Belkin's "suspend and resume" function circuits that affects as what we refer to as sleep and wake up mode. Other 3rd party hubs are a toss up so I don't even go there any more.
    ...Ron

  • OS X Mavericks v10.9.4 Update still does not fix the wifi shut off in sleep mode problem

    OS X Mavericks v10.9.4 Update was supposed to fix the wifi connectivity problem with my iMac. Wifi disconnects in sleep mode and does not connect when awakened.  Must reconnect manually every time. PITA.

    Your observation is correct about wifi disconnection in sleep mode. That is normal, you may want to check to see if your Mac supports Power Nap/is enabled- OS X: About Power Nap
    The reconnect should be automatic within a few seconds.
    Does it happen with multiple wifi networks or just one?
    Have you tried deleting and re-adding the wifi network?

  • Looses Wi-Fi on "sleep mode"

    Hi, great phone btw,
    I finally bought that nice phone in germany yesterday.
    everthing works nice exept:
    At home I´m loggind in in my W-LAN (Wi-Fi) everything works great but, if I put my phone into, dont know how to call it, "Sleep-Mode" that means, I push the Button on top of the phone (Screen gets black and phone is in standby). So after I push that button again, or the "Home-Button" The Wi-Fi signal is gone and it stands on "Edge". After I slide the the cursor to unlock I fine in my Wi-FI again.
    So is this normal, because in the backgroud I have an instant messenger working in safari browser and it also get loose the connection while the phone is an "Sleep-Mode" / "standy mode".
    Hope for an answer.
    Sry my bad english

    IT is Normal...
    Reason would be that in sleep mode the assumption is you are no longer using the connection (since no Apple given application runs constantly)
    SO yes it is Normal for it to "disconnect" in sleep mode and reconnect when the phone is awakend.
    Also helps to perserve the battery life inbetween charges.
    Welcome to the forums and also your English is fine.

  • Disconnected from ANY chat program when I go into sleep mode

    I am using an airport express connection with road runner. When my computer goes into sleep mode, any chat program I am using is disconnected -- this happens with AIM, iChat, and Netscape Navigator's chat screen. As soon as I move my mouse, or touch the keyboard, and go active, AIM automatically reconnects. Any ideas on how I can remain signed into a chat service when I go into sleep mode?

    In sleep mode your mac only keeps the data in the RAM. all other things will be turned off, so that it´s impossible to stay online with the chat applications.

  • Macbook air keeps disconnecting from internet when going to sleep mode

    New macbook air keeps losing Internet connection when going into sleep mode. Have tried deleting and re adding network and adding DNS 8.8.8.8 still is disconnecting.
    Also, since Lion update 2 days ago Internet is very sluggish
    HELPPPPPP!!!

    You're not the only one.  See here:
    https://discussions.apple.com/thread/3704539?start=0&tstart=0
    The current fix is to turn off sleep mode or use an Ethernet cable.

  • Wifi disconnects when waking from sleep mode; running Mountain Lion

    Had this same issue with Lion as well,, wifi disconnects when waking from sleep mode,,,any ideas how to fix this pesky issue?

    Hi Sky,
    This has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users

    Dears,
    I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users. How this can be sorted

    Hello Bibhore,
    Calls can be declined by hitting the sleep/wake button twice quickly.
    Decline a call and send it directly to voicemail. Do one of the following:
    Press the Sleep/Wake button twice quickly.
    iPad User Guide - When someone calls
    http://help.apple.com/ipad/7/
    Cheers,
    Allen

  • Is it normal wifi disconnect when iPhone 5 iOS 6.0.1 is locked or in Sleep mode?

    is it normal wifi disconnect when iPhone 5 iOS 6.0.1 is locked or in Sleep mode? i wondering if this normal or not, coz my iPhone 5 disconnect when my phone is locked or in sleep mode,  any suggestion or comments are highly appreciated!

    It sounds like to me that Apple has worked out a way that the data service providers can increase your usage of the cellular network to increase your bill which undoubtably has resulted in kickbacks. It is pretty crafty and I'm sure most people won't even notice. What really blows my mind is that they have people saying that it is to save battery life. I can't imagine that the ammount of suppossedly saved battery life is even messurable. Reeks of a scam to me.

  • Need help - wifi gets disconnected when it goes to sleep mode - iOS 6, iPhone 5, WPA Enterprise

    Hi, I have read a lot of discussions regarding wifi gets disconnected when it goes to sleep mode on iOS 6, mainly on iPhone 5.
    Here is my configuration and it just keeps disconnecting wifi connection once it goes to sleep mode
    iOS 6
    iPhone 5 white
    Purchased on Nov 3
    Work wifi config: WPA Enterprise
    I tried to manual add the wifi but it did not work. I tried all except for upgrade to iOS 6.0.1. I had a call to Apple Support and the guy told me I could not trust everything i read from here (well, how dare he is!!!). But I did all I could think of, and read from here.
    I am with ATT and I do not have a receiption at all at work. I have to turn it to airplane mode, and use the wifi connection. I put my iPhone 4 with iOS 5.0 side-by-side to compare. My iPhone with iOS 5.0 DOES NOT disconnect the wifi connection when it goes to sleep mode; but of course, we all know, iPhone 5 with iOS 6.0 does
    Any helps would be so much appreaticated. I am considering to return the phone to apple store, and cancel my 2 yrs extended contract with ATT. I might think to get another one once they have the issue fixed. It is no point to have an expensive paper-weight at work while I can't use the celluare nor wifi connection.
    Thanks again,

    Hi ChrisJ4203
    I have tested it at home wifi tonight. My phone and my wife's iphone (both iPhone 5 with iOS 6.0) do the same.
    With cellular data on (aka airplane mode OFF) with WIFI ON
    Wifi icon replaced by ATT's LTE icon once the phone was waken up from sleep mode; but within 2 secs, the wifi connection got reconnected again.
    With cellular data OFF (aka airplane mode ON) with WIFI ON
    WIFI icon disappeared from the top bar after both phones were waken up from sleep mode. It took a while to reconnect to the wifi network (more than 10 seconds).
    On a separate note, after i rebooted my phone, i can see it does "searching" the ATT's signal, then it shows "No Service", then next second, it shows ATT with full bars and LTE icon.
    My question is, i have never noticed the "No Service" showing up from my iPhone 4. The "No Service" shows up on my wife's phone too. When I first got her phone and was doing the installation, I had noticed the cell signal dropped from full bars to no service, then within few seconds, it went back up. I have not had time to test on her phone again, but it is something I will be monitoring for. I wonder if anyone has similar experience like this.
    anyhow, any feedback on how to fix the wifi got disconnected while in sleep mode would be very helpful.
    thanks,

  • External hard disk disconnected after recovery from prolonged sleep mode

    helloI am new on this forum and hope I will not make any mistakes.On my Probook 4740s, if I go into the prolonged sleep mode, when I come out, my external hard disk (verbatim USB3 1To with 2 partitions) is disconnected and I must restart the PC.This does not happen if I go into the normal sleep mode.Thanks for your help

    Hi @Karlo12333 ,
    Welcome to the HP Forums!
    It is a great  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    Unfortunately coping the partition does not work.  I don't thing you will be able to create recovery media from the copied partition on the external but if you have not yet created recovery disk you can give it a try.
    If you cannot create the recovery media you will need to contact HP support to obtain a recovery kit.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Network disconnect when in sleep mode

    Hi all.
    Since I've installed Mountain Lion, any time the computer goes into sleep mode, networking do the same: I cannot download files, when the computer wakeup I have to wait the reconnection before being able to use mail, safari or ather network stuff.
    I did not find any option to set, telling the computer waht to do when in sleep mode.
    WIth Lion and preceding OsX this was not an issue.
    Is there anything I can do?
    Thanks.
    Federico.

    Hi,
    Yes, clear "Allow the computer to turn off this device to save power" in the properties of network adapter\Power management as mentioned in the link provided by arnavsharma, and check if the issue persists.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • Error message that I don't have permission

    I just updated to maverick and I don't have access to most of my folders, my desktop included.  There is a little red "do not enter" icon in the lower left corner of the folders.  Help!

  • DVDSP Motion Menus

    Please forgive me if this topic has come up here before. My situation is I have a motion menu that starts with logo fanfare and then goes to the looping part where you can select "play move" etc. My question is how can I set it so when you press the

  • Images scrambled after iPhoto update

    This week, I moved photos from an old Mac to a new Mac. The photos that had been so neatly organized on the old computer came in all scrambled on the new Mac...two years worth of photos in total disorder. Does the new iPhoto have the settings and con

  • Too much output fails xsql response

    We have a strange problem I post a XML message as a request to query some data . The server reponses well if the amount of data to respond is not too much. If amount the data exceeds a certain limit we get an error. Flow we use: for development we us

  • I must have used a wrong id when loading my itune gift card,please let me know which account redeemed it.

    i must have used a wrong id when loading my itune gift card,please let me know which account redeemed it. <Edited by Host>