WRT54G2 - Port Forwarding is not working properly?

I have a WRT54G2 model #1 with firmware Version 1.0.00 setup as a static IP address connection from my data provider. The router provides service to an Internal IP network of 10.50.6.___. The connection is working properly and I am able to access external IP's from all internal computers. I am attempting to have all inbound traffic on port 9100 forwarded to 10.50.6.49 (a network printer). I set up port forwarding and enabled it according to previous posts in this forum, and I see the inbound traffic in the log, but nothing appears to be getting to the printer. I am able to ping the printer from the router, and print to it from internal PC's. I am fairly new at this process but know enough to be dangerous. How can I tell if the traffic is actually being routed to the printer or is getting lost in the router?
Thank you!

Hey try resetting the router reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

Similar Messages

Port forwarding 3389 not working!! help!! needed urgently

i am trying to forward the RDP port to a terminal server inside my LAN. but things are not working for me. Router is 801 ISDN
my config is..
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname edi-ISDN
ip subnet-zero
ip name-server 213.x.x.20
ip name-server 195.x.x.222
isdn switch-type basic-net3
nterface Ethernet0
ip address 192.168.0.254 255.255.255.0
ip nat inside
interface BRI0
no ip address
ip nat outside
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication pap callin
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer idle-timeout 500
dialer string 4004444
dialer hold-queue 10
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password xxx
ip nat inside source list 101 interface Dialer1 overload
ip nat inside source static tcp 192.168.0.100 3389 interface Dialer1 3389
no ip http server
ip classless
ip route 0.0.x.x x.0.0.0 Dialer1
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
line con 0
password xxx
transport input none
stopbits 1
line vty 0 4
password xxx
login
no rcapi server
the ip nat translation output was
Pro Inside global Inside local Outside local Outside global
udp 86.96.x.x:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.x.x.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.x.x.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53
edi-ISDN#show ip nat trans
Pro Inside global Inside local Outside local Outside global
udp 86.96.130.249:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.96.130.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.96.130.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53

update ip nat translation shows that the connection touches the outside interface(dialer1) of the router but then it disconnects.
=====================================
Pro Inside global Inside local Outside local Outside global
tcp 86.96.131.184:80 192.168.0.100:80 --- ---
tcp 86.96.131.184:3389 192.168.0.100:3389 86.96.139.115:29083 86.96.139.115:29083
tcp 86.96.131.184:3389 192.168.0.100:3389 --- ---

Port forwarding is not working on SRP521W

Hello,
I have a problem with incoming traffic.
I opend 3 ports as followed:
I have olso anabbled de remote web menagement on port 888.
From the outside i can access the remote management. but i cannot access my webserver on prot 80 or 443. I have checked with the isp provirder en these port or not blocked.
Can anywane help,
Thanks,

Hi Danny, to my recollection there are not any bugs on the current releases for the SRP for forwarding.
To affirm, you have went to Network Setup -> NAT -> Port forwarding
Also, are you able to log in to the server locally with the LAN IP address using an internet browser for http and https?
-Tom
Please mark answered for helpful posts

Back Forward arrows not working properly Safari 5.1.2

After upgrading to Safari 5.1.2 on Snow Leopard, I have run into a bug with the back and forward arrows. Most of the time they are greyed out and not working. I have to move back and forward with either the keyboard shortcut or the menu. Sometimes one or the other starts to work, but it is not clear why. I have not seen both working yet.

Here is what comes up (a lot!). I feel like the days of "Conflict Catcher" with MacOS 9 and before! Anyway, it is late here, maybe where you are, too. Thanks for all the quick replies. I need to get some sleep and will come back to this in the morning.
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.Logitech.ControlCenter.HID
com.iospirit.driver.rbiokithelper(1.7.2)
com.rogueamoeba.HermesAudio(4.1.0)
com.markspace.iokit.IOMissingSyncMassStorage(191)
com.IPEVO.driver.IPEVO(1.2)
com.Cycling74.driver.Soundflower(1.5.1)
com.rogueamoeba.hermes(4.1.0)
com.parallels.kext.prl_hypervisor(5.0
com.sophos.kext.sav(7.3.0)
com.vmware.kext.vmx86(2.0.6)
com.parallels.kext.prl_hid_hook(5.0
com.vmware.kext.vmci(2.0.6)
com.parallels.kext.prl_usb_connect(5.0
com.vmware.kext.vmioplug(2.0.6)
com.parallels.kext.prl_netbridge(5.0
com.vmware.kext.vmnet(2.0.6)
com.parallels.kext.prl_vnic(5.0
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
com.parallels.vm.prl_naptd
net.videosurgeon.Video-Snooper
com.wdc.drivemanagerservice
com.vmware.launchd.vmware
com.sophos.notification
com.sophos.intercheck
com.sophos.autoupdate
com.rogueamoeba.hermes
com.parallels.desktop.launchdaemon
com.google.keystone.daemon
com.freemacsoft.appcleanerd
com.bjango.istatlocaldaemon
com.barebones.textwrangler
com.adobe.versioncueCS3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.wacom.pentablet
com.parallels.desktop.client.launch
com.Logitech.Control
com.google.keystone.root.agent
com.brother.LOGINserver
com.bjango.istatlocal
com.artificialmachines.TextWand
ws.agile.1PasswordAgent
net.infinite-labs.PlugSuit.Agent
com.valvesoftware.steamclean
com.tastyapps.SpiceRack
com.ecamm.printopia
com.cnet.ttengine
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
/Library/Address Book Plug-Ins:
.DS_Store
BTGoogleDirections.bundle
BTGoogleEarth.bundle
BTGoogleMaps.bundle
BTGooglePreferences.bundle
PostCheck.bundle
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
.DS_Store
AECore.framework
Adobe AIR.framework
Compressor.framework
DivX Toolkit.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
GlimsAdditions.framework
GoogleMapsShared.framework
MacFUSE.framework
MediaServerAPI.framework
Motion.framework
NyxAudioAnalysis.framework
ONCore.framework
ONDocument.framework
ONPSEmulator.framework
ONProxySupport.framework
ONlibapr-osx.dylib
ONlibapr-util-osx.dylib
ONlibjpeg-osx.dylib
OnOneWidgets.framework
PluginManager.framework
ProFX.framework
Qmaster.framework
SAVI.framework
SUMScanKit.framework
TSLicense.framework
onOneToolbox.framework
/Library/Input Methods:
/Library/InputManagers:
1PasswdIM
GearsEnabler
GrowlSafari
SIMBL
Smart Crash Reports
SparkPlug
/Library/Internet Plug-Ins:
.DS_Store
AdobePDFViewer.plugin
CANONiMAGEGATEWAYDL.plugin
ContentUploaderPlugin.plugin
CoolirisWebKitPlugin.plugin
CouponPrinter-FireFox.plugin
CouponPrinter-Safari.webplugin
DirectorShockwave.plugin
Disabled Plug-Ins
DivXBrowserPlugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Gears.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
MacCouponPrinter3.plugin
PDF Browser Plugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Scorch.plugin
ShiVa3D.plugin
Silverlight.plugin
Yahoo! Installer 3.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
huludesktop.webplugin
iPhotoPhotocast.plugin
npUpload.xpt
npdivx.xpt
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.Logitech.Control Center.Daemon.plist
com.artificialmachines.TextWand.plist
com.bjango.istatlocal.plist
com.brother.LOGINserver.plist
com.cooliris.SetLaunchArch.plist
com.google.keystone.agent.plist
com.parallels.desktop.launch.plist
com.teamviewer.teamviewer.plist
com.teamviewer.teamviewer_desktop.plist
com.wacom.pentablet.plist
org.glimmerblocker.updater.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS3.plist
com.apple.third_party_32b_kext_logger.plist
com.barebones.textwrangler.plist
com.bjango.istatlocaldaemon.plist
com.freemacsoft.appcleanerd.plist
com.google.keystone.daemon.plist
com.parallels.desktop.launchdaemon.plist
com.rogueamoeba.hermes.plist
com.sophos.autoupdate.plist
com.sophos.intercheck.plist
com.sophos.notification.plist
com.teamviewer.teamviewer_service.plist
com.vmware.launchd.vmware.plist
com.wdc.drivemanagerservice.plist
net.videosurgeon.Video-Snooper.plist
org.glimmerblocker.proxy.plist
/Library/Mail/Bundles:
.DS_Store
/Library/PhonePlugins:
Samsung-D347.phoneplugin
Samsung-D357.phoneplugin
Samsung-D407.phoneplugin
Samsung-D807.phoneplugin
Samsung-T519.phoneplugin
Samsung-T609.phoneplugin
Samsung-T629.phoneplugin
Samsung-T719.phoneplugin
Samsung-T729.phoneplugin
/Library/PreferencePanes:
Apple Qmaster.prefPane
Archives.prefPane
Candelair.prefPane
DivX.prefPane
EarthDesk.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
GlimmerBlocker.prefPane
Growl.prefPane
HyperDock.prefpane
Logitech Control Center.prefPane
MacFUSE.prefPane
PenTablet.prefPane
Perian.prefPane
VersionCueCS3.prefPane
/Library/PrivilegedHelperTools:
com.barebones.textwrangler
com.freemacsoft.appcleanerd
net.videosurgeon.Video-Snooper
/Library/QuickLook:
.DS_Store
GBQLGenerator.qlgenerator
ParallelsQL.qlgenerator
QuickLookEyeTV.qlgenerator
VMware Fusion QuickLook.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
CanonMJPEGAVI.component
CanonMJPEGAVIDec.component
CanonText.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX Decoder.component
DivX Encoder.component
EyeTV MPEG Support.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
IMXCodec.component
LiveType.component
Motion.component
Toast Video CD Support.qtx
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Services:
.DS_Store
Add to Web Clips.workflow
Browse Movie Library.workflow
Browse Photo Library.workflow
Browse iTunes Library.workflow
Create Formatted Link for Front Document.workflow
Currency Converter.workflow
Keynote Pie Chart from 2-Column Selection.workflow
New Event for Selected Date.workflow
Pages Pie Chart from 2-Column Selection.workflow
Print Selection.service
PrintSelection.services
Search in YouTube.workflow
WordService.service
/Library/StartupItems:
MissingSyncMounting
ParallelsDesktopTransporter
Qmaster
Library/Address Book Plug-Ins:
.DS_Store
AdiumAddressBookAction_AIM.scpt
AdiumAddressBookAction_ICQ.scpt
AdiumAddressBookAction_Jabber.scpt
AdiumAddressBookAction_MSN.scpt
AdiumAddressBookAction_SMS.scpt
AdiumAddressBookAction_Yahoo.scpt
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Components:
Spell Catcher.component
Library/Frameworks:
GoogleMapsShared.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
GlimsAddition.notplugin
Instant Action.plugin
Picasa.plugin
Library/LaunchAgents:
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.apple.SafariBookmarksSyncer.plist
com.cnet.ttengine.plist
com.ecamm.printopia.plist
com.tastyapps.SpiceRack.plist
com.valvesoftware.steamclean.plist
net.infinite-labs.PlugSuit.Agent.plist
ws.agile.1PasswordAgent.plist
Library/Mail/Bundles:
.DS_Store
GrowlMail.mailbundle
MailRecent.mailbundle
Library/Mail/Bundles (Disabled 1):
GrowlMail.mailbundle
Library/Mail/Bundles (Disabled):
Library/PreferencePanes:
Perian.prefPane
Printopia.prefPane
SpiceRack.prefPane
TechTracker.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
1Password Addition.osax
Paperless Addition.osax
SpiceShaker.osax
Library/Services:
Spell Catcher Services.service
ToastIt.service

Airport Ext. Port Forwarding does not work

I am trying to open up UDP ports 500, 1701, and 4500 to point to my local computer since i'm using iVPN. However, Airport doesn't seem to want to open these up. I disabled Mobile Me as per the support document I found and still having issues.
I want to be able to VPN via my iPhone and/or MacBook Pro into my home network.
My Mac Mini is running 10.6.5 with all the latest updates. My Airport Ext has the Wireless N with latest updates as well.
Any help appreciated. I have spent over 2 hours searching on google and could not find any documents that actually got this to work.

To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the iVPN device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the iVPN host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <ignore this for now; it will change to Custom once you start entering values>
o Public UDP Port(s): 500, 1701, 4500
o Public TCP Port(s): 1723
o Private IP Address: <enter the DHCP-Reserved IP address you created earlier>
o Private UDP Port(s): 500, 1701, 4500
o Private TCP Port(s): 1723
o Click "Continue"

SAP inbox work item forwarding is not working properly

Hi,
We are having problem in forwarding the work item in ECC Upgraded environment.
If USER1 forward a Work item to USER2, the work item is disappearing from USER1's inbox. also the same the same forwarded copy is available in the USER1 Outbox.
But it is not reaching the USER2's inbox. Not able to trace where it is going. the USER1 has the authorizations to forward the work items.
Is there any settings or changes that needs to be done in ECC6 for forwarding?
Help is appreaciated.
Regards,
Prathap

Hi!
Have you checked note 1308276 - WF: Forwarded work items are not displayed in the inbox.
Br
Geir

Port Forwarding not working properly.

Router: WRT54G V.6
Firmware: 1.00.9
Basically, my port forwarding does not work. Using this link (https://www.grc.com/x/portprobe=55554), I can test a port to see if it's open or not.
Whenever I open a port on the router, it displays the port as "CLOSED", while I am aiming for "OPEN". This is a new router, and this problem also was occuring on my old V.2 one. Strangly, when I first tried opening the ports, it worked fine. Next day, it appeared as close, and no other settings were changed.
Any help out there? If any more information is needed, please tell me.

Only if grc reports the port "STEALTH" you have no port forwarding. If it is "CLOSED" then the port on the computer you are forwarding to has the port closed. You must check the settings on the computer where you forward to to see whether the port is open or not. Simply setting up a port forwarding does not open a port. It simply forwards everything to the ip address configured in the port forwarding. Thus, if the port is closed there it is closed and not open.

Swipe between pages in Safari not working properly

Lion works perfectly so far, the only known issue I have is that Gesture in Safari to go Back or Forward does not work properly: Swipe between pages (Scroll left or right with two fingers).
it means I see the previous page under the actual page, but the task would not complete and it's like something blocking it to turn the pages. I hope you understand what I am saying. Anyone with the same bug? Any solution?
I've restored safari, cleaned the history and Reset it, restart computer, unselected the gesture option in Preference and activate it again, with no luck.

I've had the same problem as feri. Dylanksf described the behaviour best - when two-finger swiping forward and back in Safari, the page moves slightly to the side, then acts as if it "catches" on something before moving further. The result is it's nearly impossible to swipe back and forward (although the 3-finger swipe still works). I don't have Flexiglass installed.
Usually I'm able to solve the problem by doing the following: (1) open system preferences and select "Trackpad"; (2) go to the "More Gestures" pane; (3) toggle the "Swipe between pages" checkmark and settings; (4) put the settings back to how you want them.
On some occasions, however, this doesn't seem to work. In that case, go back to the main System Preferences panel, choose "Universal Access", select the "Mouse & Trackpad" pane, and click on "Trackpad Options...". Then toggle the checkmark beside "Scrolling" off and back on, and make sure scrolling is set to "with inertia". This managed to solve my problem when the method above didn't work, and also resolved an issue I was having where the scroll bars were failing to automatically disappear when using the magic trackpad.

The Connect from Intel Pro/1000 T to 1000base-t Port on Catalyst 4000 (WS-X4412-2GB-T= module) Not Working Properly

The connect from Intel Pro/1000 T to 1000base-t port on Catalyst 4000 (WS-X4412-2GB-T= module) is not working properly. The Intel Pro/1000 T NIC connects to a 10/100 OK. Auto-negotiation is set at both ends. We can successfully ping across the link. However performance is so poor as to make the connection unusable.

When an Intel Pro/1000 T NIC is connected to a Catalyst switch, the customer may see poor network connections or excessive numbers of dropped packets. The problem arises when a module with a TBI interface transmits an odd byte packet to a receiver with a Gigabit Media Independent Interface (GMII).
The interoperability issue is a result of the implementation of Carrier Extension. Carrier Extension is detailed in sub section 35.2.3.5 in the IEEE 802.3 specification. Carrier Extension can be used to pad the last byte of a packet, so the packet is aligned on an even numbered boundary.

WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

Mini Display port DVI adapter not working on Thunderbolt Port

For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV. I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly. The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it. Does the Thunderbolt port require a new display port to DVI adapter?

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion. I am facing following messages.

Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process:         iTunes [463]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.7 (10.7)
Build Info:      iTunes-10702101~1
Code Type:       X86-64 (Native)
Parent Process: launchd [273]
Date/Time:       2012-10-22 23:33:07.226 +0200
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report:          4918 sec
Crashes Since Last Report:           2
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x102a96000 -        0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff62696000 -     0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,

You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

Jms is not working properly in clustered environment

Hi all,
i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
we are using the jndi.properties as follows ...
java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
java.naming.security.principal=oc4juser
java.naming.security.credentials=oc4juser
oracle.j2ee.rmi.loadBalance=lookup
we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
i have seen that for every instance there one jms server. at runtime it is taking one application servers services
say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
here jms is not working properly when i send message
As we have clustered environment message must be propagated all the applications who use above jndi.properties.
if i keep use only one application server opmn say
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
then its is working excellently
please can u provide any solution ASAP
thanks in advance
Manu

Dear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN

Dial UP Modem is not working properly in Satellite A200-1GB

My A200 - 1 GB's modem is not working properly. It tries to connect but at last it says remote computer is not responding. As i noticed It has a "Agree" 56kpbs modem.
It shown as Toshiba Software Modem.
I tried so many times it doesn't work properly. I tried by changing the assigned COM ports to several other COM ports like COM1,COM10,COM 4 ext... same thing occurs.
When I diagnose the modem via the modem properties no matters found.
Same as when I'm dialing through the modem to a telephone (i mean as a call) it's working properly. I mean it can call to a mobile phone or land phone.
But the same phone line is working properly with my desktop modem as same as another HP laptop modem.
It seems there is some malfunction on my 56k modem.
I tried even uninstalling and reinstalling but still the matter exists.
Can anybody help me in this case?

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=109510#109510
Seems you have started two threads about the same theme.

WRT54G2 - Port Forwarding is not working properly?

Similar Messages

Maybe you are looking for