WRT54G2 setup and using Linksys software

After installing the router and Linksys software (which had it's problems) I attempted to enter the setup using my browser and the address given in the instruction manual which I had downloaded from your site. This was 192.168.1.1. Although typing in this number produced the login pop up, when I typed in the default password, admim, I could not get into the setup pages. However if I used the gateway - advanced settings in the Linksys software I could get into the setup. I took me some time to spot that the address, when using the Linksys software was not 192.168.1.1 but 192.168.0.1. Is the published address in the manual wrong or is the installation routine incorrectly changing it.
Also when using the Linksys Advisor software selecting various options results in the error "Exception has been thrown by the target of an invocation" - WHAT! If I don't quickly close the error box and close the option my computer starts to do all sorts of strange things and I have to switch it off as it wont shut down. Because of this I have had to uninstall the Linksys Advisor software.
Anybody any ideas.
Gra
Solved!
Go to Solution.

Hi,
ipconfig shows the gateway as 192.168.0.1
My ISP is Avanti Satellete and I connect to their modem via my LAN socket. The modem is mounted outside and wirelessly transmits to a host station installed at a neighbour's house. Via equipment there it is sent through a satellite dish to Avant's server. I am (and did) supposted to get a 1Mb/s connection but at the moment their system is getting overloaded and they are in the process of updating their equipment to solve the problem. Because the system performance can be iratic it sometimes makes it difficult to know if a problem with the connection is my end or their end!
Where I live ADSL broadband is not available and and even dialup is not good.
The Linksys Advisor appliation works but some of the options (eg: change wireless security, for one) result in the error message "Exception has been thrown by the target of an invocation". If I don't cancel the message, and exit the option, the computer starts to do strange things and leaves me no option but to switch off!!
Because of this I have uninstalled it.
Regards

Similar Messages

  • How to setup and use Passbook on iPhone 4?

    How to setup and use Passbook on iPhone 4?

    So your saying you can only copy part of this text?

  • Where can I learn how to setup and use the new features in Mountain Lion?

    Where can I learn how to setup and use the new features in Mountain Lion?

    MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

  • How do I setup and use Hawaiian fonts?

    How do I setup and use Hawaiian fonts in OSX 10.7.4?  The instructions I obtained by Googling no longer seem to work.  See Wahinoho.net
    Message was edited by: fbeckner

    How do I setup and use Hawaiian fonts in OSX 10.7.4?  The instructions I obtained by Googling no longer seem to work.  See Wahinoho.net
    Message was edited by: fbeckner

  • How to let java auto discern file type and use related software to open

    thanks

    sorry;
    I am making a program about searching file;
    when this program achieve searching;the result(all files that Fulfiling requirements ) will be shown in JTable;when user click a cell that include fileName;program will produce a object like
    File f=new File(filepath);
    I dont kown what this files type will be,so I hope java can auto discern file and use related software to open(like windows open file with related software)

  • Add wrt54g to airport (wired) and use Linksys as switch?

    I have searched and searched and have found SO MANY different things about this... but nothing that seems to help me.
    I want to know if I can connect a Linksys WRT54G (v.2) to my Airport Extreme and use the linksys as a switch.
    I actually bought a netgear switch that I will be using, but I was thinking of putting the Linksys after the netgear.
    Modem -> Airport -> (wired to) Netgear Switch in attic -> (wired to) Linksys WRT54G near PS3, TiVo, etc.

    Sure, you can do this.
    The "key" configuration on the Linksys is that it must be configured in "bridge mode". You'll need to be access the web setup page for the Linksys to do this.
    Once you have the Linksys configured as a "bridge", you can connect an ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN port on the Linksys.
    If you intend to use Netgear switch ahead of the Linksys, then it would be connected to one of the LAN ports on the AirPort Extreme. From the Netgear switch, you would connect an ethernet cable to the WAN port on the Linksys. Again, the Linksys must be configured as a 'bridge" in either example above.

  • How to setup and use usb superdrive

    I have a new iMac and purchased usb superdrive as well.  External superdrive does not appear to work and wonder if I am doing something wrong.  When I plug into usb port it does not appear on desktop or in Finder window.  When I insert a CD it brings in the cd and you hear it trying to read but nothing happens and the contents of cd do not show in a finder window.  After a while it ejects the cd.  What am I doing wrong.  Need to use the cd drive to install items.  Thanks for any help.

    Ralph,
    Thanks again.  Inserted a cd that I am sure is good which came fro Hewlett Packard and contained printer software and also a cd that contained just photo files and got same results on both cd's.  Assume the drive must be bad which seems strange, but guess possible.  Will take back to Apple tomorrow and let them check.  Thanks for your time!

  • Installing and using different software on different computers of Master collection simultaneously

    Question:
    If i purchase the "Adobe Creative Suite 6 Master Collection",
    Can i install and use the different software on different computers simulataneously?
    example:
    Can i use photoshop cs6 on machine 1
    and then illustrator cs6 on machine 2
    and then indesign cs6 on machine 3
    all simulataneously?
    Thanks

    No. It's not possible. You have 2 activations that are valid for all apps and that is that. Read the EULA
    Mylenium

  • Documentation for Setup and use OracleASJms in JDeveloper preview 3

    Hi, Is there any documentation / tutorial that show how to configure and use OracleASJms in JDeveloper Preview 3(11.1.1)with the Embedded OC4J? Thanks!
    - Matthew

    Hi,
    not that I am aware of. However, you may want to try the JDeveloper 11 and OC4J 11 forum at JDeveloper and OC4J 11g Technology Preview
    Frank

  • How to setup and use connection pool in Web AS 7.0?

    Hello SDN!
    I'm developing a Web Dynpro Java application on SAP Web AS 7.0 My app using a couple of DAO classes as model instead of EJBs. These classes perform direct requests to database using JDBC drivers.
    I've read that many of web-servers use their own connection pools. So I want to know:
    1) how I can setup connection pool in SAP Web AS ?
    2) how I can call this pool in my application?
    Could you please give me some examples?
    Regards, Lev.

    hi lev,
    check this document for jco pools
    http://www.winfobase.de/lehre/lv_materialien.nsf/intern01/FB09D79A41930E34C125709F0046180C/$FILE/Tips&Tricks_JCo_Programming.pdf
    ravindra

  • Oracle Wallet Setup and Use Help Needed - Respond

    We are trying to make our shell scripts use the wallet rather than using the files which has password in them
    What are the advantages of wallet over the password file?
    Also let us discuss the disadvantages of oracle wallet as well. So we can decide on using the existing system of keeping the passwords in the password file itself or migrating to oracle wallet
    Thanks for your time

    Hello, iam trying to install oracle ifs on my laptop. You can hekp me out..
    1>I have installed oracle 9.0.2 database.
    My question is do we need to install oracle IAS also. I have installed that one too..and intstalled ifs in the same folder of ias. But iam facing problem iam trying to open login page ..http server is not finding my login page . Http server is in oracle database..can u help me out thanks

  • Newly signed up to CC and using trial software?

    I have just signed up to CC and launched Illustrator this morning to be confronted with a window saying its an Adobe Illustrator CC Trial?
    What the hell is going on here, please can anyone verify that this is correct?

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Driver Setup and Apple Update Software in FRIGGEN GERMAN

    How did this happen? and how do i get the default language back to english.
    I think i downloaded some dirver manually and got it set to german. It's driving me nuts.
    how do I get the default language to be english...HELP!!

    someone must know.....
    how do I set it to english?

  • Can you install and use the software "infuzer" with IPad

    Can someone advise if yo can do the above, and if so how?

    Only if it is available in the App Store.

  • Have an Apple TV device I have gone thru setup with and used.  Want to sell it now but concerned that it may store personal info that would be at risk if I sold it.  Should I be concerned?  Can I wipe it clean?

    I have an Apple TV device that I attached to my tv, went through the setup, and used for a couple of weeks.  I would like to sell the vice now, but I am concerned that it may in some way store personal info on it like the credit card no. that I would use for paying for movie rentals, etc.  Does this device store any personal info on it that would be at risk if I sold it to another person?  If so, is there some way I can wipe that info off of it? 
    The Macbook Pro and Apple TV were both bought from the Apple website in December so I assume they are the most recent models and operating system.
    Would appreciate any help.  Thanks.

    Settings > General > Reset > Restore, will wipe everything in preperation for resale.

Maybe you are looking for