WRT54G2 V1 can't update firmware plz help

I have searched and searched for anyone else that has had this problem and haven't seen a single post in hours of looking across multiple sites so I finally broke down and decided to post it. I am trying to update my router from the 1.0 firmware and when I go into the 192.168.1.1 > administration >upgrade firmware (192.168.1.1/Ugrade.htm) the screen doesn't appear and there is a little ! in the corner saying there is an error on the page (in firefox). I have tried this with multiple computers and they all do the same thing. I have tried unplugging it for 30 seconds and holding reset for 30 seconds. I have tried IE firefox and chrome. If anyone has any ideas please let me know.

If you are unable to upgrade the firmware on your Router, Then you can try the steps mentioned by sabertooth and that should fix your problem.
On your computer try to clear the Browser Settings of your IE and Firefox and then try to upgrade the firmware of your Router.

Similar Messages

Can not update firmware on Officejet Pro 8610

Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
Does anybody have a suggestion? Thanks, Jim

Hi @jwhite8150 , and welcome to the HP Forums!
I see you're having issues updating your firmware. I would like to help!
Before we start I have a request.
Press Setup on the front panel of the printer, and select Reports. In the reports menu select Print Status report. On that report, please let me know what firmware version is listed.
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

Hi,
I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
I have also followed the instructions here:
http://http://forums.creative.com/showthread.php?t=3478
But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
I've even used an XP install on VMware on a MAC (This was the closest to success).
On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Can I update firmware on Airport Extreme? If so, how?

Can I update firmware on Airport Extreme? If so, how?

Please check out the following Apple Support article for details on how to update AirPort firmware.

I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?, I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?

I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?, I create. Apple. Id but asking review asking account information n I can t sign in ,,,,,,,Plz help,,,,,?

You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.

My iPod cannot be updated! Plz help!

I'm using a 30-GB iPod with Video, bought May 06 in Japan. It can't be updated for 1 month so far. I still can update songs into my iTunes properly, while songs in iTunes can't get into my iPod. I've tried to reset iTunes and iPods in my PCs for several times, but the problem can't be solved. Error message is "The iPod cannot be updated. The file or directory is corrupted and unreadable". Can anyone show me how to settle the problem? Thank you guys. Van Anh
iPod 30 GB with video Windows XP
Windows XP
Windows XP

Oh, I don't think my iPod's being not updatable due to iTunes 7.0 on Windows XP. The error message "Your iPod cannot be updated. The file or directory is corrupted and unreadable" also appears with my at-home PC which runs original iTunes 6.1 (the Apple running disk went with my iPod). I've come to realize that Folder "Photos" in the iPod may be the reason? I deleted pictures in it once, and since then, I can't add new photos, together with new songs from my iTunes library into iPod. When I double-click the Photos folder, the message "The file or directory is corrupted and unreadable" also appears. How can I fix it? I've reset my iPod but failed to fix the problem. Don't anyone of you meet the same matter? Plz help! Thank you guys.

Zen MicroPhoto or Micro stuck in Recovery Mode? Can't update firmware? Try this

I got these instructions from here:
http://blog.opsan.com/archi've/2005/09/3/472.aspx
This is the only thing that worked for me to get my broken Zen MicroPhoto up and running again. It was stuck in Recovery Mode and my XP SP2/WMP laptop wouldn't recognize when trying to load firmware or in Creative Media Explorer or WMP.
To Fix any problems with broken firmware form attempted "playsforsure"
firmware updates etc where your pc finds it as a 20mb dri've and it sits
in recovery mode and does bugger all:
1. Uninstall all creative software & drivers
2. Uninstall Media Player and Media Player runtime (will require a
reboot for each thing). This is done by going to add/remove programs and
uninstalling (this will put your pc back to wmp0).
3. Re-install the Zen Driver from the creative website and reboot (I just reloaded Media Explorer using my ZMP install CD).
4, Plug Zen in.
5, Make sure you have the firmware update ready, run it but don't click
the language bit yet), leave the mouse hovering over your language
selection. (for ZMP, just start firmware exe file, there is no language selection. You can get the firmware update from Creative's site, go to SUPPORT and then DOWNLOADS).
6. On the Zen- select "reload OS" (on ZMP I believe it is Erase or Reload Firmware, something like that, don't have it in front of me).
7. As soon as it flashes up "reload new firmware now via USB" click the
language button
8. Now the pc should find it and allow you to re-load the
firmware. (it may take a few attempts)
9. Once complete, click close and restart the pc. Everything should now
be fine.
0. Once all is working, you can re-install WMP and it will work fine.
I hope this helps somebody.
Message Edited by mdscriber3 on 08-04-2007:2 AM

does that mean when in vista or xp same problem still occurs?
http://storeyourpicture.com/images/s...lectronics.jpg

Can't update firmware for Ipod Touch on my PC

I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
It will not let me update the firmare, but I can sync fine.
To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

Can't update firmware from 7.4.1 to 7.4.2

I have an AirPort Express with 802.11n, working fine. Every once in a while, AirPort Utility pops up and tells me that it found that AirPort Express and "This AirPort Express should be updated to a newer firmware version. Current Version: 7.4.1 Available Version: 7.4.2"
So, I click on Update Firmware... and it seems to do it - meaning that it takes a few minutes, reports success, and restarts the Airport Express.
BUT - when it comes back up, it is still showing that it is running 7.4.1.
What can I do to get 7.4.2 on this AirPort Express? What's wrong?
Thanks!

I write in this thread because I think my situation is related, even if a bit different.
I had many problems with the update of my Airport Express. It started noticing I had to update the firmware to the 7.4.2 and but I've never been able doing it. As it worked fine even with the permament notification I didn't thought it was a great problem.
Then I update my OS from the 10.4.10 to the 10.6 all in one and started having more problems with my Airport Express which was constantly asking to update to the 7.4.2 but it wasn't possible in any way.
I checked this page in the Apple support
http://support.apple.com/kb/HT3486
and I updated the Utility Airport app to the 5.5.1 but it didn't help.
The worst level of problem is that I tried to link another two people (one with a mac 10.5 and one with a pc) to the wireless net and there was not access possibility.
After a reset of the airport the utility app was almost totally blocked and closed the access even from my mac notifing that my WAP password was incorrect.
At this time there are no ways to change this situation.
I'm trying to understand what's the real problem and - if someone has suggestions - how to solve it.

Nokia N96 can't update firmware

I have Nokia N96-1 with 20.050 firmware. I checked my code is 0543719 and the 'Can I update' link said i can, to version 30.033. I tried updating from my phone, it said No updates available. I have the latest NUS and it can't identify my device. What now?

http://www.nokia.co.in/support/download-software/device-software-update/can-i-update
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

2 Q's Ipod not Recognized in Windows and Can't Update Itouch, Please Help

Hi all,
I recently got an Ipod Itouch as a gift and my Dell Inspirion 6000 doesn't recognize it. I can only eject it thru Itunes. Please help. My next issue is that I can't update my Itouch. The error message I get is Itunes can't contact the Ipod software update server because you are not connected to the internet. I am connected thru AOL. Please help. Thanks

oops
Message was edited by: GFF

Can We... Plz Help me...

hello Friends...
Can any one help me plz....
i want to know, whether we can include a frame(swing) in an jsp file,.. if so how....
plz help me if u know......
regards
Arulraj...

No, Swing is a windowed, standalone application. JSP is server side technology for delivering HTML to a web browser. That said, you COULD make an Applet that uses Swing and put it inside the page.

Can't update iPod, please help!!!

Normally when you click on "file" in iTunes, one option is "update iPod" but it is pale (can't select it). I can't update it so please reply if you can help!!
Also, yesterday it wouldn't let me disconnect/eject the iPod, and also every now and again a message saying something about a "corrupt file" comes up.
If you can help me with any of these things. PARTICULARLY the updating one then please reply ASAP!!
thanks!

http://manuals.info.apple.com/en/iPodUser_Guide(color_display).pdf
Try this link put. It has some good basic information on how to update your ipod. Try to manually update your ipod, the instructions for it are in there. When you are talking about the smart list i think you are refering to the smart playlist. What you can do is set a playlist that has different options that will automatically update the playlist. Say for instance everything that you rate as five stars you can make a playlist that will take all of the songs that have five stars and put it on that playlist without you having to do anything.
Now about the issue of the do not disconnect. I had the same issue with mine when I had first got my ipod. If you look in itunes at the very top in the little dropdown menus there will be one called preferences. Now with your ipod connected click on the ipod tab. There should be an option in there that will let you listen to music etc while it is charging on the computer. The default setting for when it is hooked up to a computer is to not play music or anything until it is unplugged.
I hope that will take care of your questions, if not let me know and i'll see what i can find for you and if it did work if you don't mind let me know.

Nokia 3230: can´t update firmware

hello,
i've just bought a 3230 and i can´t upload 3230's firmware using last PC Suite v.6.83 and Nokia Software Updater.
Can anyone UPDATE this phone firmware?
If you can, please reply. thanks

Hi,
Please contact to Nokia Service Center for doing such update.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

WRT54G2 V1 can't update firmware plz help

Similar Messages

Maybe you are looking for