WRT54G2 V1 Reset Help?

Someone changed the admin/password from default on the panel, and now I can't change the settings. Any suggestions on what I can do?

If the admin password has been changed there's no way for you to access the setup page and do any changes. You can reset the router and reconfigure the settings though. Push and hold the reset button for 30 seconds then power it off for 10-15 seconds. Once the power light goes solid, you can then start reconfiguring the settings of the router. For instructions, you may refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection. After the settings will be configured, I suggest that you change the admin password to a different one to eliminate the chance of having it changed by someone else.

Similar Messages

  • Keyboard (hardware & onscreen) suddenly don't work anymore - only factory reset helps

    I have my Passport for about a month now and just experienced the following problem for the second time: all of sudden the keyboard (both hardware and onscreen) don't work anymore. I cannot enter my device password anymore, I can focus the password dialog, but then simply nothing happens when I press keys.
    After a restart of the Passport it asks me for my SIM card PIN. Again, I can focus the text field in the dialog, and I can touch numbers of the onscreen keyboard, and the number keys light up, but no input gets to the dialog.
    There is simply no way to activate the device anymore. I can do a backup using BlackBerry Link, and I can access the device with BlackBerry Blend - but the device itself is useless. No kind of restart or reset helps. The only solution is to do a factory reset, after that the device works fine again - for some time.
    Once this happened while I was on the road, without doing anything with the device. The second time it happened when I was trying to deploy a self written app using the Momentics IDE.
    Additional information:
    - development mode is on (needed since I want to develop Apps for BB10)
    - Snap is installed
    - a handful of Android apps from Google Play store are installed
    - two BlackBerry World apps are installed (whatsapp and HUB++LED)
    Did anyone experienced similar issues or has an idea what might cause this problem?
    Thanks!

    Quote from: Svenomous on 25-September-06, 23:08:26
    Have you tried using a usb keyboard/mouse?
    I don't use any usb, only use PS2. Maybe it is possible to use some sort of a PS2 to usb converter, but I would rather like the PS2 to work.

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • TS4006 The camera shutter will not open and the camera screen is black front and rear ipod 4, tried force quit and reset, help?

    The camera shutter will not open sometime and the camera screen is black. It seems to open as if were switching to the rear but that also appears black? i have force quit the app and hard/soft reset, help?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Far Cry 4 - computer froze. Only hard reset helps.

    Hello dear forum.
    First my pc:
    4790 stock
    8gb ram
    Sabertooth Z79 Mark2
    Msi Gaming 980 ( Oc factory )
    Corsair 750 RM
    HDD 500GB SATAIII
    So 5 days ago when playing Far Cry 4 my computer suddenly freezes with "BZZZZZ" sound.
    ( ctrl alt del and so on didn't work I had to pull the power and restart. )
    So only hard reset helps.
    Question of course . Why i was had one single hard freez 5 days ago?
    There is no any minidumps file to analyze. Minidump folder is empty.
    No minidump file.
    Nothing appears in the Event Viewer other than the typical error messages stating that the previous shutdown was unexpected.
    On windows event log i have this:
    Log Name: System
    Source: Microsoft-Windows-Kernel-Power
    Event ID: 41
    Level: Critical
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    It can be game or something with hardware?
    After that i run even Prime95 Blend for 10 hours, without errors.
    I test Watchdogs for 2 hours , no crash.
    I test Metro Last Light for 2 hours, no crash.
    I test Unigine Valley for 1 hour, no crash.
    I test 3dmark 11 Extreme loop for 1 hour , no crash.
    Also i dont OC my pc, all is stock.
    I am using 334.75 WHQL drivers.
    What you think that freeze was game\software or hardware related?
    Like i say all is fine now, but i am worried about that one single freez ( only hard reset helps ) from 5 days ago.
    Thank you for any suggestion.
    Should i be worried?
    Yes it happens only once, so thats why i create a topic problem. Because i want to know , what caused that one single freez. I never had freez like this even before.
    The most strange that my freeze happened once, 5 days ago. I am now 100 hours in game ( Far Cry 4 of course ) and nothing happened again.
    It can be software or hardware problem?
    Freez was related to software or hardware then ? What you think?

    Quote
    It can be software or hardware problem?
    Freez was related to software or hardware then ? What you think?
    based on everything that you said, nothing is conclusive
    do more test and see if the issue will come back again

  • My 5s wont restart after a reset , help

    My 5s wont restart after a reset , help if you have seen or had thus problem how did you resolve it

    Hi Steven,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPhone.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    https://support.apple.com/en-us/HT201412
    All my best,
    Allen

  • I forgot all of the answers to my security questions and when I set up my apple id I did not add a rescue email, I recently got a new iphone and I cannot purchase anything on it because it asks me to answer my security questions which i can't reset, help!

    I forgot all of the answers to my security questions and when I set up my apple id I did not add a rescue email, I recently got a new iphone and I cannot purchase anything on it because it asks me to answer my security questions which i can't reset because I do not have a rescue email. what do I do?

    this does not help. I have forgotten ALL of the answers to my security questions. I can NOT reset the answers to my security questions without answering two of the three security questions. The other way to reset the answers to these questions is for apple to send me an email on my rescue email addres which I DO NOT HAVE.

  • IPod freeze/reset help

    So I'm pretty sure my iPod's finally gone. I have no idea what to do. I turned it on before, and it went to the language selection. Of course, first thought to my head: "***?!" So anyway, I go to pick my language..... it froze. I reset it (The menu+select thing), same thing. It locks up as soons as it starts. It goes straight to the language-select and freezes.
    In the past couple minutes, however, I have had a development. Now, instead of freezing, it just resets after a couple seconds. If you hit any button or try to use the scroll during those couple seconds, however, it immediately resets.
    I've tried plugging it into my computer as well as just a wall socket... no dice. In fact, I managed to get that 'recent development' by plugging it into my computer... unfortunately it doesn't actually do anything for me. Plugging it into the wall just makes it do the freeze thing. Plugging it into the computer makes it do the reset thing (and occasionally the freeze thing). Not plugging it in anywhere makes it do the freeze thing.
    Erm.... help? Please?
    20gb color photo    

    It sounds like it's dead. If you want to get it repaired you can check out some of these sites:
    http://www.ipodresq.com/
    http://www.ikaput.com/
    http://www.brokenipods.com/

  • 30Gb Gen 5 won't reset, Help please

    Hi folks
    Ipod started playing up today - very slow menu movement. had it in my dock when it froze. I pressed the off button on my dock remote and it switched off as normal. went back to it this evening and it switched on frozen. So I thought i'd do a reset. plug into computer, computer dings, ipod does not ap[ear on system. flicked onto hold. no difference.
    If the ipod won't go to hold how can i reset????
    Help please
    Bone finder

    Just found out you can reset with out it being linked to the computer. by holding the menu and center button down.
    Bone finder

  • TV signal gone after reset HELP please..

    Since we got that major update on BT vision 3-4 months ago my vision has been near on useless. it freezes when watching freeview channels, wouldnt even load the catch up menus half the time, when I called and complained I was told it was because the update did something to my machine and it needed another update to fix it.. But when I called for an update of this Friday just gone I was told it was because my box needed a reset,
    I done the reset, and got this error code VDR016 it then continutes to do the update succesfully, Well it says succesfully but now I have the most terrible signal on most channels, which I never had before the reset,
    I have since reset it twice more, to be met with the same error before the installation finishes, and the same bad picture each time.. I have unplugged and replugged in all my cables incase one was caught at any time during me doing the reset, and still I have the same issue.
    I would call BT over the phone, but im sick of being lied to and messed aroound, and spending hours at a time (Yes I literally mean hours) waiting for answers running tests and still being no further forward..
    so has anyone got any ideas as to what I can try before I just cancel it and try sky again
    My internet is running 75meg fibre optic, Vision box is hardwired to the router, and internet is running perfectly,

    Try purging the channel list, not likely to solve the problem but you never know. Remove the aerial from the box and do a channel scan, which will clear it. Then replace the aerial and scan again.
    You can click the white star next to this message if you think it was helpful.

  • My Iphone 5c is not turning on even after hard reset, help

    Iphone 5c is not turning on after i charged it last night. I have tried holding down the sleep button and home button, not helping.

    Hello there, mila's mom.
    The following Knowledge Base article offers some great steps for troubleshooting the very issue you're describing:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • BB ID PASSWORD RESET HELP!!!!

    I really need help to reset my bbm id password,, tried and got an email  to reset the password but cant even get to email,, how do i get email,,  I need to just reset the password,, any help appreciated !!!,,,its a bb curve 8530,,
    Solved!
    Go to Solution.

    Hi yummmybear,
    Welcome to the Community,
    Why you are  unable to get to your email,try to login via PC or laptop,Here is how to reset your PasswordBlackBerry ID Password Reset
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • DEAD new ipod, used 2 hrs, won't charge, turn on or reset, help please?

    Today my son was happily using his brand new IPod, then left it to charge, even though it was still half full. The do not disconnect screen came on, so he left it charging. When he came back, the screen was blank! It will not even charge, will NOT turn on, will NOT reset and we have checked the computer settings. I am a mum, never used Ipods before, but looking at the discussions they are bewildering, why so many problems??? Can someone please just tell me the answer without all the tech talk! I have no idea on reinstalling things or what a firewire is. This is brand new so why should we be encountering all this hassle, very stressful and frustrating. Please help if someone has found a way around it without being too technical. Thank you.
    Windows XP Version 5.1

    Hi Shiela,
    First off, let's do this to safely disconnect your iPod from your computer (at this point, just unplugging it may cause some problems):
    1 - Close all running applications on your computer, and save your data. Shut down your computer.
    2 - After the computer had fully stopped running and is shut down, disconnect your iPod from the cord which connects to your computer.
    With your iPod disconnected from your computer, start your computer back up.
    Then, make sure that your iPod's "Hold" switch (lodated on the top of your iPod) isn't turned on. The orange side of the switch is the On position, while white is off. Switch your iPod's Hold switch to the Off (white) position.
    Then, reset your iPod by pressing the Menu and center buttons together for at least 6 seconds. You might need to try this several times.
    If the iPod still doesn't seem to be respond, connect it to your computer again, and try resetting the iPod (see above) a few times while it's connected to your computer.
    Any success with trying that?
    -Kylene

  • FACTORY RESET HELP

    okay guys i need major help! i recently bought an iphone4 off craigslist. its telling me i have to enter the previous owners information into it, in order to get in and set it up. IS THERE ANY WAY I CAN DO A COMPLETELY RESET ON IT WITHOUT GETTING INTO THE PHONE? i cant get ahold of the person who sold it to me and i dont want to just throw the money down the drain! PLEASE HELP!!!!!!!!!!!!

    This is the antitheft feature that users have been requesting.  You cannot restore the phone without knowing the previous owners ID and password.  That phone is useless to you.  There's absolutely nothing you or Apple can do.

  • Blank screen after i reset help please

    my screen is white blank i tried resetting and restoring numerous times also plugged it in to computer wont recongnize device please helpit is the iod nano

    Hi RexGenius,
    I understand that you are cannot boot up your HP ENVY Sleekbook 4-1117nr. I will try my best to help you resolve this issue.
    In this document for Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot that may resolve this issue.
    Since you were in the system recovery when the issue started, I am also sending this document for Troubleshooting HP System Recovery Problems (Windows 8).
    I hope this information helps, please let me know.
    Thank you,
    I worked on behalf of HP.

Maybe you are looking for

  • Month and Year has to Display as month name and Year

    Hi, For Fiscal year/period, report displays like for example <b>004.2007</b> instead of <b>July 2007</b> I would like to see the reports as <b>July 2007</b> ( not to display as <b>004.2007</b>).. Our financial year is <b>April to March</b>. Help will

  • Forced to eject iPod

    In a recent attempt to test the battery life of my 30G iPod, I changed iTunes' settings to manual update of my iPod. I knew this would force me to have to eject the iPod when I was done updating. However, now that I'm done with the test, I've changed

  • Create folder sync with automator

    I have a few machines runnign 10.4.11 in our office that we are trying to back up to a NAS. However, I can't seem to get any sort of workflow via Automator to work. Does anyone have any advice on how to set up a workflow that creates a weekly backup?

  • Does  Analytic Workspace Manager 11.2.0.3.0A  work with oracle database 12c?

    hello, i would like to know if AWM 11.2.0.3.0A works against with oracle database 12c in pdb mode or not . regards jm

  • Reg: Process Flow of WMS

    Dear All I'm a MM consultant. I would like to know about the Process flow,Master data & Organization structure of WMS. pl help me Thanks pavan