WRT54G3G-ST - Connection is up but I cannot browse

I have a WRT54G3G-ST with a PX-500 Sprint Aircard. If the connection is left idle for 6 - 10 hours it stays connected but I cannot browse or ping outside my local network, basically I cannot browse the Internet at all. The connection says it is connected. If I ping a valid Internet address from a command prompt or the router it fails. If I reboot or powercycle the router everything works fine. Anyone else seeing this?

I believe this is happening to me.   Just started a few days ago.   If I rebooted and/or powered down the equipment, usually the signal would return.   I am a router newbie.   how do I reflashing the router's firmware?    What is so weird with this is that I can not surf the new with firefox or internet explorer, but I can send and receive emails though outlook on my personal PC.   On my work laptop, if I am not logged in through the VPN, I can not surf the net.   If I am logged in through my VPN for work, I can access the internet.    So instructions would be helpful or reference to a published doc.   
Also, does anyone know how to change your email address on this board?  for the life of me, I can not find a place to do that.
Thanks!
junebuggnc

Similar Messages

  • New battery fitted, now phone wont work just states connect to itunes  but i cannot

    Help, new battery fitted, now iphone won't work just either shows apple sign or states connect to itunes, but i cannot....
    Tracy

    Who installed the new battery? If you had it done by Apple, take it back in. Something is wrong. If you had it done by a 3rd party, take it back to whoever installed the battery. They broke it.

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • HT1430 IPAD IS FROZEN.  GAME I WAS PLAYING SHOWS SMALL IN CENTER OF SCREEN.  DOES NOT TURN OFF.  SIRI SAYS NOT CONNECTED TO INTERNET BUT I CANNOT GET IPAD TO DO ANYTHING SO THAT I CAN CORRECT.

    ipad is frozen.  game i was playing shows small in center of screen.  does not turn off.  siri says not connected to internet, but i cannot get ipad to do anything...frozen.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My apple 5th gen ipod is connected to wifi but still cannot access safari and other websites..can some1 help me out?

    my apple 5th gen ipod is connected to wifi but still cannot access safari,itunes and other websites. the ip address is not strtng wid 169 and i have reset the network settings also..can some one help me out

    The 169 IP address mans it did not correctly negotiate with the router:
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have to open firefox twice otherwise it will freeze. I can see my home page but I cannot browse. If I close it and then reopen it works fine. I have just noticed this after installing the latest version

    Firefox freezes when I open it. I can see my homepage (incomplete) but I cannot browse. The cursor moves but cannot open anything. If I close and reopen firefox it works fine.
    == This happened ==
    Every time Firefox opened
    == I updated to the latest version of firefox

    These issues are usually caused by firewalls. See [[Cannot connect after upgrading Firefox]]

  • Internet says it is connected, even ticked but will not browse or recieve messages or email after update. Why is this? How can I solve it? Im DESPERATE!!!

    I recently updated to 10.7 Mountain lion but i cannot browse anything any more. No email or imessage or anything but it says i am connected with a tick next to the network not just at the top. Any ideas why. It worked on 10.6!

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • HT4623 My iPad will not update, says not connected to Internet, but I am browsing support online.

    my iPad will not update, says not connected to Internet, but I am browsing support online on this same iPad?

    Can you update via itunes on computer?

  • HELP! Airport connects to network but still cannot get online

    I have a g3 crt 400mhz running OSX 10.3.9. I added an airport card. It sees networks and connects to mine but when I load Safari or Firefox it errors out saying cannot find server. My main PC can see the mac so I'm not sure what I'm what else to check. do I need to delete .plist files. Can anyone help resolve this issue?
    Thanks

    Seems like you are not getting the DNS address or addresses.
    apple > system preferences > network
    Double click on network connection you are using.
    Pick the TCP/IP tab.
    Verify that you have a DNS Server. If you do not, look on your windows machine and see what the net address is. You can also pick using DHCF and still enter you DNS server address.
    You can use harddrive > applications > utilities > network utility to diagnose the situation.
    You can ping google.com. Result:
    Ping has started ...
    PING google.com (64.233.167.99): 56 data bytes
    64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
    64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
    64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
    64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
    64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
    64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
    64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
    64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
    64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
    64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
    If that does work, try pinging 64.233.167.99 Result:
    Ping has started ...
    PING 64.233.167.99 (64.233.167.99): 56 data bytes
    64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
    64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
    64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
    64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
    64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
    64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
    64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
    64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
    64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
    64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
    --- 64.233.167.99 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
    If pinging 17.254.3.183 works but pinging apple.com doesn't. You have a bad DNS Server address.
    BDAqua suggests in a post.
    Put these numbers in Network>TCP/IP>DNS Servers for a try...
    208.67.222.222
    208.67.220.220
    Then try Safari.
    not correct...
    http://discussions.apple.com/post!message.jspa?messageID=5908432&5908432
    Robert

  • My i pod is connected to interenet but i cannot go on the interenet

    My i pod is connected to the internet but i cannot go on the internet..

    Besides powering off and then back on your router, also try:
    - Resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Iphone 4; connected to wifi but in cannot connect safari and appstore

    Hi, any one knows how to fix my problem? my iphone 4 is connected to my wifi home network. When I use the appstore it says "cannot connect to itunes store". when I use safari "safari cannot open page because it is not connected to the internet". HELP.

    The 169 IP address mans it did not correctly negotiate with the router:
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Requires me to connect to itunes but itunes cannot connect

    I was listening to music with my iphone earlier and then battery just went out, I was at work so I had it charged not after 10 hours, and when I got it wired and all that stuff, my iphone requires me to connect it to itunes but when i connect it to itunes, an error shows up, "iTunes could not connect to the iPhone xxxxx because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes", but how will i be able to do that if i can't use my iPhone? it is not even locked out due to passcode attempts. help me out please, any advice will help.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I have a ploblem: My Ipad already connected wifi. But I cannot use the safari application or App Store.It's showing "the Internet is not connecting". How to solve this problem?

    What will I solve this problem?

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I finally have the printer connected to WIFI but I cannot print from Picassa desktop photo album.

    All I get is insert memory card. I want to print from my laptop.

    Hi, tylerjim4101!
    So that the Community can help you better, we will need to know exactly which Canon printer model you're using, and which operating system is running on your computer (Windows or Mac, and which version). That, and any other details you'd like to give will help the Community better understand your issue!
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • HT1212 My iPod 4th G is locked after entering the wrong PW several times. it reads "iPod is disabled. connect to iTunes"  I have connected to iTunes, but itunes cannot connect to the iPod. Any ideas?

    I would really appreciate if anyone could help me with the question above.
    Thanks!

    iOS: Forgotten passcode or device disabled after entering wrong ...

Maybe you are looking for

  • Bootcamp and Windows XP on Mid 2010 Imac 21.5"

    I updated my mid 2010 21.5" imac from to 10.9.2 over the years.  I originally used bootcamp to install Windows XP.  The version of bootcamp in 10.9.2 no longer supports Windows XP.  How do I get the old version of bootcamp back from my install disc? 

  • Error during approval Process flow in Process controlled workflow

    Hello Experts, We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system It is regarding the two new additional a

  • Need workflow for Advanced Analysis for Office for Sizing

    Hi, I am in the process of sizing for BO solution . Part of that exercise is to find out how much cpu and memory are required for AAO? So i thought trace the AAO workflow and understand which BO services/servers it requires. If anyone any idea about

  • Dialup connections

    I have 3 laptops at home, of which 2 of the laptops have a connection for my phone cord so i can get online, the third laptop does not, it only has a ethernet/broadband connection.  i only have dial up internet service.  my question is, is there a ro

  • Dynamic Date Display

    Hi everyone, We got a report using two dates as a query filter (getting records between date_1 and date_2). Now we'd like to display the two dates in the report, for example, include it in the title part to indicate which period we are looking at. Th