WRT54G3G-ST has problems with Pantech PX-500

Hello All and Linksys Support (I hope),
I just got this WRT54G3G-ST and when I insert the PX-500 PRIOR to power up...
the WRT54G3G-ST will not complete it's bootup process.
If I insert the PX-500 AFTER power up... the WRT54G3G-ST may or may not see the card.
When it does see the card the blue Data-Card LED flashes along with the Power LED
but the system will not go online.
My Sprint card works just fine in my laptop PC.
I called LinkSys Support earlier and a Tech said that this unit (ending in -ST) does
NOT work with the PX-500 PCMCIA card. He said I needed to get the WRT54G3G-AT.
I think he is incorrect.
I found the following link on the web site: (you must reselect THE hardware version)
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1175237416666&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1666641396B21&displaypage=nodata#versiondetail
When you go down to "Firmware updates" and take a look at the Version Info
you will see that this card IS supported:
Release Notes 2.00.9 Model Name: WRT54G3G-ST (for Sprint) v2.00.9_000 (2006/11/02)
1. Add Support for Pantech PX-500
2. Add support for Sierra AC595
v2.00.4_000 (2006/08/09)
1. Support Novatel S720
2. Support Novatel S620
3. Support Sierra AC580
4. Support Sprint PC5740
I am thinking that this unit is defective as far as the PCMCIA is concerned. Any Suggestions??
Message Edited by strben on 12-29-2007 09:43 PM

I have the same setup as you and it works. Looks to me like a bad router as the Pantech card works in your notebook.
JefferyS

Similar Messages

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

    Firefox has problems with images.
    In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
    Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
    Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
    And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
    I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
    I use Ubuntu.
    Does anyone else have similar problems? Or know where the problem lies?

    Do you have the latest driver for your graphics display card?
    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Pdf reader X has problems with small pdf and printer with post script driver

    Hi friends.
    I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
    When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
    When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
    When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
    my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
    But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
    i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
    Can someone help me please.........are there settings in Reader X who can solve my problem ???
    Thank you very much for help!

    put ? after rwcgi60.exe

  • Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Hi,
    yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
    1. closing the app and reopen it
    2. restart the iPad
    3. restore the iPad via iTunes
    4. Begging the app to work again.

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

    My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

    This morning i was not able to hear sound on my recently purchased  macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound  box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
    Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

  • I have got new hardrive windows 8.1 and i have downloaded PS, LE and AE...Clouds...when i open PC so i get massage on rigth corner short time." your photoshop has problem with compalitet"....i have not put things back or used PS,,,what shall i do? LR work

    i have got new hardrive to windows 8.1....when i open my PC so i get message on lower right corner  - very short time - your photoshop has problem with compalitet....i have not used it yet or put brushes and so on back....LR is working fine...i can open photoshop without problem..and AE...what shall i do?...

    Thanks for info:
    A. Backup before doing anything advanced is recommended but not widely used.
    B. Upgrade on vanilla plain (and updated) operatiing system goes flawlessly. Upgrade on "real" computer may depend on "status" of operating system and applications installed. You may not be the last experiencing troubles.
    C. Software vendors expect that users has nearly unlimited disk size, large memory and latest processor.
    D. It is on you to find anything positive to compensate annoyances. Mental balance is in your hands ;-)

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    Try using Settings > General > Reset > Reset All Settings.

  • PC Suite has problem with 3120

    PC Suite has problem with 3120

    I also have detected the problem. It is not any physical malfunction according to me. It occures with my phone when I unplug it and plug it again. Sometimes is useful to change the USB port and afterwards to move back to the previous one. Try it and also try it combined with PC restart. It is a weird problem!?

  • What can i do when my ipod 5 has problem with icloud ?, what can i do when my ipod 5 has problem with icloud ?

    what can i do when my ipod 5 has problem with icloud ?

    No idea, as you make no mention at all of what the problem is.

  • FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

    For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
       Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
    However, do not look for any results for above two weeks.
    Roger

    The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives.  I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
    The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ).  The statement was true at the time it was written and has nothing to do with memory problems.
    Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too.  I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon.   Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works.  I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition.  As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers.   But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time.  One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces.  Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code.  But, knowing my source, it may all be fiction.
    The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ.  If you send me the full part numbers I will check the specifications a get back to you.  Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
    Roger

  • WRT54G3G-ST with Pantech px-500

    Hello:
    I am new to these forums so be easy on me. I was wondering if the WRT54G3G-ST is compatible with the Pantech PX-500 Sprint card.
    I have heard mixed reviews. Are there any confirmed cases of them working together? Is there a firmware issue here?
    -alfred

    I got unofficial word from a friend from sprint that Linksys was working on a firmware update for this router. Also, I heard they were beta testing the new firmware at CES.
    Can anyone confirm?
    -alfred

  • Hi, I was trying to run the trial program the Flash Pro after downloaded, but it pops up with this message that it has problem with lisensing and the error code is 213:19. What should I do?

    PLEASE HELP ME OUT;(

    even though this is not for flash, use the solutions - Error 213:19 | Problem has occurred with the licensing of this product

Maybe you are looking for

  • Kernel panic when trying to start a OEL5u5 template vm

    Hi, I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm.

  • Sync from 3GS to new iphone 4

    I've synched my 3GS to my mac and now need to sync to the iphone4. (transfer all apps)

  • Post URL for next step in workflow

    Does any one know how IdM generates the id for the next step in a workflow? When you initiate a workflow IdM generates a URL similar to the following: http://10.84.1.155/idm/user/workItemEdit.jsp?id=%23ID%2351F4B46A5BC216A1%3ABE841C5%3A113F524AB6B%3A

  • JTabbedPane Title change

    I have a JTabbedPane with different component like txtName, cbCourse. If i edit the name of the txtName field, the corresponding name should change in the JTabbedPane title also. As of now i can update the txtName value after saving in the DB. But i

  • Security Update 2007-600 killed my Mac...

    Hi, Recently bought my G5, installed Tiger and updated to 10.4.9 without any issues. This evening I (stupidly?) installed Security Update 2007-006, clicked on 'restart', and have had grief ever since. My system won't boot. I get the grey apple and sp