WRT54G3G-ST with Pantech px-500

Hello:
I am new to these forums so be easy on me. I was wondering if the WRT54G3G-ST is compatible with the Pantech PX-500 Sprint card.
I have heard mixed reviews. Are there any confirmed cases of them working together? Is there a firmware issue here?
-alfred

I got unofficial word from a friend from sprint that Linksys was working on a firmware update for this router. Also, I heard they were beta testing the new firmware at CES.
Can anyone confirm?
-alfred

Similar Messages

WRT54G3G-ST has problems with Pantech PX-500

Hello All and Linksys Support (I hope),
I just got this WRT54G3G-ST and when I insert the PX-500 PRIOR to power up...
the WRT54G3G-ST will not complete it's bootup process.
If I insert the PX-500 AFTER power up... the WRT54G3G-ST may or may not see the card.
When it does see the card the blue Data-Card LED flashes along with the Power LED
but the system will not go online.
My Sprint card works just fine in my laptop PC.
I called LinkSys Support earlier and a Tech said that this unit (ending in -ST) does
NOT work with the PX-500 PCMCIA card. He said I needed to get the WRT54G3G-AT.
I think he is incorrect.
I found the following link on the web site: (you must reselect THE hardware version)
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1175237416666&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1666641396B21&displaypage=nodata#versiondetail
When you go down to "Firmware updates" and take a look at the Version Info
you will see that this card IS supported:
Release Notes 2.00.9 Model Name: WRT54G3G-ST (for Sprint) v2.00.9_000 (2006/11/02)
1. Add Support for Pantech PX-500
2. Add support for Sierra AC595
v2.00.4_000 (2006/08/09)
1. Support Novatel S720
2. Support Novatel S620
3. Support Sierra AC580
4. Support Sprint PC5740
I am thinking that this unit is defective as far as the PCMCIA is concerned. Any Suggestions??
Message Edited by strben on 12-29-2007 09:43 PM

I have the same setup as you and it works. Looks to me like a bad router as the Pantech card works in your notebook.
JefferyS

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

Report with more than 500 rows

I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
Thanks a lot
Sudha

Hi All,
The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
Thats solve ur problem i think.....
Thanks n Regards,
ROSY

Can anyone confirm if it works with Olympus e-500?

I'm really wanting to dive in to this software - I have about 4k photos, but I want to see if it will work with the e-500.
Thanks in advance!

I own a brand new Olympus E-500 and Aperture 1.0.
There's no support for the RAW format in Aperture yet. Only Adobe Photoshop with the Camera RAW 3.3 plug-in and the original Olympus Master Software are able to open the RAW images from the E-500.
RAW images from my Nikon Coolpix 5400 are also not supported.
As I understand the System software has to support the image formats, not Aperture. I am sure Mac OS X 10.4.4 will add some cameras. You find a list of supported cameras here: http://www.apple.com/macosx/upgrade/cameras.html
G5 2x 2,7 GHz Mac OS X (10.4.3)

Categorize a table with more than 500 formulas or unique values.

How comes you can't categorize a table with more than 500 formulas or unique values? Can you change this?

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500

My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)

I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          4/15/2010 7:01:27 PM
Event ID:      5159
Task Category: Filtering Platform Connection
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID:  13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address:  0.0.0.0
Source Port:  9000
Protocol:  17
Filter Information:
Filter Run-Time ID: 0
Layer Name:  Resource Assignment
Layer Run-Time ID: 36

Is MSI gtx 750ti compatible with HP pavilion 500-232el?

Hi,
I want to upgrade my graphic card.
I'm looking for a MSI GTX 750ti.
is this card compatible with HP pavilion 500-232el?
Thanks in advance,
Alessandro
This question was solved.
View Solution.

Hi,
Since your PC has a version 8 BIOS, then review the below post HP articles.
HP Secure Boot Windows 8 Topics Computer Does not Start After Installing a Video Card (Windows 8)
BTW - most models of the NVIDIA GTX 750 graphics cards should work with the exception of those that require an auxillary PCI-E six (6) pin power connector.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Report printing with BI pubisher - 500 Internal server error

Hi,
I was having problems using BI publisher to print with. I thought we didn't have it at first, however since found we do have BI Publisher Enterprise edition.
When I put the settings into APEX, reports don't display as expected. I get
report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.Now if I navigate to the URL in my web browser, http://[server]:[port]/xmlpserver/convert, I get a 500 - Internal Server Error page. The requets is definitely hitting something because if I change "convert" to say "convert1" then I get 404 (as expected). So it seems as if convert is found but then a problem occurs.
If I navigate to just http://[server]:[port]/xmlpserver/ then I see the BI publisher enterprise login screen.
Any ideas what might be causing this or what I could do to resovle it?
Our APEX instance is on a unix box and BI on a M$ box if that matters (long story)?
Thanks

Ignacio Cobos wrote:
Hello
>
> I get this error when i try to access to Bex Analyzer
>
> ERROR: URL used, "http://sesue:50300", is not fully qualified.
> A fully-qualified URL has a schema with the format "<protocol>://server.company.com:<port>". URLs with the format "<protocol>://server:<port>" or "<protocol>://<ip address>:<port>" are not fully qualified.
> See SAP Notes 581329 (Not possible to implement) , 596698 (Not possible to implement) and 654326 (Not yet released)
>
> Can anybody say me any idea how to solve the problem?
>
> Thanks in advance
Dear Cobos, For FQDN related issues : Set profile param "icm/host_name_full" with corresponding FQDN via RZ10 transaction. Also check login/create_sso2_ticket & /accept_sso2_ticket parameters in the profile you have created. Instead of "http://sesue:50300" you may to have the URL like "http://sesue.domain.com:50300//SAP/BW/BEX/". Please refer this #scn article for more details : http://goo.gl/QPlrx Similar Issues : http://goo.gl/mRCh0 Hope it helps. Thanks.

Will Wireless WRT54G3G Work with USB Broadband card?

Hi, I bought the WRT54G3G Router... When it arrived I realized it was made to take a plug in Broadband card with the small connectors. I have a USB broadband card. Does anyone know if it will still work via another method, ie: via a lan line, or if there is an adapter for the wireless plugin that would convert it so it could be used with a USB port? Any help would be greatly appreciated... Thank you... Jo
Message Edited by WhimzicalArtist on 07-16-2007 11:27 AM

i don't think it would work with the USB card... it is made only for the PCMCIA cards...

Using the WRT54G3G-ST with cellular PCMCIA cards other than Sprint?

I am looking at using a Cingular PCMCIA "aircard" with my laptop, but would also like to take advantage of it at home for a desktops with wi-fi adapter when not in use with my laptop. The WRT54G3G-ST seems to only be sold from Sprint (in the US at least), but I am wondering whether folks here have experience using it with any other vendor cellular broadband cards? It would seem that this SHOULD work, but I wanted to see whether there are any known gatchas.

Have you changed Sprint login info to Cingular info?
In notebook, load Sierra Watcher software, verify card connects thru watcher, then ask watcher for particulars of connection to Cingular.
Change all the Sprint connection info to Cingular.
One other problem, Sprint frequencies may differ. Sierra web has pdf with command set of Sierra cards, so you can ask card for frequency band it is using.
Many posts of connecting to Cingular in Linux should apply to G3G connection to Cingular. Many lists of conection protocols are in those posts.
Please reply if it works near fast as same card does in Windiz!

Relay Server with a Http 500 error (SUP 2.2)

Hello experts,
The history is the following, after upgrading my unwired server from SUP 2.2 SP 02 to SP 05 the aplication stopped working.
We could get Register, but we could but not synchronize.
We connected the device directly to SUP and it worked we could register and synchronize but. when connected to Relay Server only register is possible.
at the moment our only hint is the Http Error 500 that is appearing in the relayserver log. What could be causing the internar error?.
Thanks in advance.
Below there is an example of a Successfull Comunication and a Unsucessful one.
thanks
Laguerta
SUCCESSFUL COMUNICATION
New request for new session from UltraLite/12.0.1.3817 accessing /ias_relay_server/client/rs_client.dll/FARM/ml/APPID/APPVersion
Relaying headers
<Original request header> Content-Length: 1120
<Original request header> Content-Type: application/octet-stream
<Original request header> Host: <-Host IP>
<Original request header> User-Agent: UltraLite/12.0.1.3817
<Original request header> ml-client-id: 3fdf25b0-5efb-11d7-8000-c66fe18554e7
<Original request header> ml-session-id-from-client: 22d75af0-9830-11d7-8000-c7117799da56
<Original request header> X_SUP_APPCID: 150006F0063006B0065007400500043000000434937302D3638323133353231303900__SGFMobility
Start relaying Content-Length body of 1120 bytes
Waiting for response packet
Up padding.
1460 bytes RS_UPCHANNEL_NOOP()
Waiting for client request
Down packet offset 000b8028
527 bytes OE_SERVER_RESPONSE(<F8B0S798R0>;oidx=0;sidx=43;sfp=404d89f3;payload=505;filler=0)
Waiting for server response with trip left: 78987387301
Down packet offset 000b8250
Got next packet after offloading and flow-control. SQ-length=0(ok);LQ-bytes=0(ok);shm=8624608;sfp=404f3
1460 bytes OE_DNCHANNEL_NOOP()
Received down packet
Waiting for server response with trip left: 78987387301
<Response status> HTTP/1.1 200 OK
UNSUCCESSFUL COMUNICATION
New request for new session from UltraLite/12.0.1.3817 accessing /ias_relay_server/client/rs_client.dll/FARM/ml/APPID/APPVersion
Relaying headers
<Original request header> Content-Length: 1616
<Original request header> Content-Type: application/octet-stream
<Original request header> Host: <Host IP>
<Original request header> User-Agent: UltraLite/12.0.1.3817
<Original request header> ml-client-id: 3c9625750-180a-11e4-8000-89c67gh30ec16
<Original request header> ml-session-id-from-client: 0ea17930-1e39-11e4-8000-b0e177c16c6d
<Original request header> X_SUP_APPCID: 150006F006306B006500700500043000000434E37302D3439323133343234393000__APPID
Start relaying Content-Length body of 1616 bytes
Got next packet after offloading and flow-control. SQ-length=0(ok);LQ-bytes=0(ok);shm=8624833092;sfp=6b308e60
Up padding.
Received down packet
1460 bytes RS_UPCHANNEL_NOOP()
Expiring RS session cookie due to previous failure
Waiting for client request
<Response status> HTTP/1.1 500 Internal Server Error

I'm able to Register but not to Synchronize.
what could lead to this situation?
Thanks in Advance
Sync Profile
APPDB.GetSynchronizationProfile().ServerName = <Relay Server IP DEV>
APPDB.GetSynchronizationProfile().PortNumber = 80;
APPDB.GetSynchronizationProfile().NetworkProtocol = "http";
APPDB.GetSynchronizationProfile().DomainName = "DevDomain";
NetworkStreamParams streamParam = APPDB.GetSynchronizationProfile().StreamParams;
streamParam.Url_Suffix = "/cli/iarelayserver/DevRBSFarm"; //Sync DEV
ConnectionProperties connProps = app.ConnectionProperties;
LoginCredentials loginCredentials = new LoginCredentials(idUser, pass);
connProps.LoginCredentials = loginCredentials;
connProps.ServerName = <Relay Server IP DEV>
connProps.PortNumber = 80;
connProps.FarmId = "DevMBSFarm"; //Login DEV
connProps.UrlSuffix = "/cli/iarelayserver/";
connProps.NetworkProtocol = "http";

Custom page sizes with HP DesignJet 500

I work with Vectorworks 2008 ps2, and when I tried to plot to a HP Designjet 500, I can't use the Custom page sizes I've created, I have already deleted the plotter and reinstalled it with the Print and Fax preferences, but it didn't help, so please if anyone knows how to solve this matter let me know.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Looking to collaborate with game developers ($500)

Hey everyone - my name is Ayo. My company, Flypad turns your iPhone into a game controller.
30 Second demo here: https://vimeo.com/35823386
We're launching a freemium app for iPhone and Android, that will be a dedicated gamepad for 6 flash games. The app will be free in the appstores, with an upgrade available for $0.99. In addition to the $500, each game developer will also earn $0.05 per upgrade sold. This is an opportunity to make money from the iPhone & Android in a very unique way, and we're looking for developers we can work with on future games as well.
The details are below. If interested, please email me (Ayo) at [email protected], with a link to your game or demo:
Integrate with the WanderPlayer API (should take 15 - 30 minutes) - documentation is here:http://games.wanderplayer.com/developers/flash
Must deliver an ad free, link free, fully integrated game, to be hosted securely at games.wanderplayer.com, with one or more of the following hooks:
Tilt style control - see example: https://vimeo.com/38423928
Wii style control - see example: http://www.youtube.com/watch?v=HSMpFtaE7RA
Local multiplayer - see example: https://vimeo.com/38339102
Will be part of a freemium app with 1 free game, and 5 paid gamesPaid upgrade will be $0.99
Payment will be minimum $500 ($250 upfront and $250 on delivery)
Upside is unlimited and calculated by
30%: Apple
45%: WanderPlayer
5% to each dev selected (Each game developer gets $0.05 per paid player,
If interested, please let me know and send over a link to a demo of the game you'll be using (or a demo video).

Hi
Browsers do not allow you to communicate with the computer except in a very limited way, and accessing files to run them is a definite no, which if you think about it is a sensible approach otherwise there is nothing to stop anyone opening any file/app on a persons computer, (it can be done by getting your user to download and approve the installation of a small 'interface' program, which is what hackers also do to gain control of a computer).
An alternative may be to create an air of flex app to do this that requires connection to your server in order to play.
PZ

What to do with two new 500 GB HD's

I have a Mac G5 dual 1.8 with 2.5 GB DDR SDRAM, factory installed 160GB HD. I recently installed a second internal Seagate 500 GB HD.
I had a WD external 500GB HD that died in 6 months (yes, I fortunately backed up all info on DVD), which they are replacing.
I have Super Duper! and am wondering the best way to utilize the two 500GB HD's since I would like to have all info backed up on two drives and also use the external as backup boot up drive.
Do I use the 160GB for only running programs? do I partition both the Internal and external 500GB (each a 160/340 split and mirror them)? Can SuperDuper! handle this kind of backup?
I hope this makes sense since I am having a confusing time trying to figure what to do. thanks!

Hi! Here's what I would probably do:
1. Clone the 160 gig drive to the 500 internal and use it as the boot
drive.
2. Clone the new 500 boot drive to the 500 external for a bootbale
backup of the entire drive. I would reclone about once a month or
longer depending on useage.
3. Once I was sure everything was working ok I'd erase the 160 and then
partition it with a small partition for an "emergency" boot drive
with a clean install of the OS on it with a copy of all utilities
such as Diskwarrior and TechtoolPro and a second partition of the
remaining space to which I would use SuperDuper to back up the user
or documents, pictures, music folder every day.
This way you have two bootable backups from with to repair any damaged directory and besides the main clone on the external you also have a backup of your documents and/or user folder every day. My problem with setting SuperDuper to clone the drive every day is that if the OS becomes unstable you may end up backing up and unstable system which could yield both systems unstable with little way to recover except a clean install.
Tom
Message was edited by: Thomas Bryant

WRT54G3G-ST with Pantech px-500

Similar Messages

Maybe you are looking for