WRT54GC setup timeout when trying to connection to internet

hi there,
I've just bought the WRT54GC v2.0 and I haven't yet been able to connect to the internet with it.
I used the Setup CD (well, there's not much choice actually) and after I have finished making all the connections asked there is a progress window that says "Checking Internet Connection" that eventually times-out and I get a popup message saying "Unable to detect internet connection". (During the process the lights on the modem flicker quite a bit, but alas...)
My internet connection works fine when I connect directly to the modem so I don't know why the WRT54GC can't connect.
Some Info:
OS: Windows XP
Modem: Netopia (Cayman 3300 Series)
Modem IP: 192.168.1.1
My Dynamically Assigned IP: 192.168.1.41 (when connected directly to the modem)
I have tried all sorts of things: (not necessarily in that order)
- Changing the WRT54GC's IP to 192.168.1.2
- Playing in the "Advanced" page
- Reseting the factory settings
- Turning off everything and turning each device on in order (modem, WRT54GC, computer) with 3 minutes between each turn-on (no pun intended)
Can anyone help? please?
newbie

Change the local IP of your WRT54GC router to 192.168.3.1 or 10.10.10.1 to avoid IP address conflicts from Netopia modem. It will not work if you had only changed the last octet of the router because it will still be within the range of the Netopia modem.

Similar Messages

I keep getting error message " server stopped responding" when trying to connect to internet via wifi

My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
Any ideas?

And you can turn the WiFi button on and off?
If yes, then you next need to try to Restore your iPhone from your backup.

Samba timeout when trying to connect to a computer in a workgroup

Hello, seems like the best section to post this in...
Right after I installed my Archlinux setup, I spent a bunch of time trying to get samba running perfectly, mainly, it was just so that other (window$) computers could access mine. Upon getting it working perfectly, both ways, I didn't use it for a while (which is typically the case).
So today, I need to transfer lots and lots of data, but via Dolphin, browsing the workgroup (which I clicked), lists all the computers that are there, including my own (this).
That's good so far, but after I browse to one of those computers (even my own!!), shortly thereafter, I receive a timeout error.
I have tried restarting the samba daemon, netfs, I also tried stopping network manager, and starting the network daemon myself, hoping it was network manager's brokenness that was the problem. Nope.
Still left in this situation...and nothing that I can remember, has changed since the last time, I didn't screw with config files or anything. Although, I do think I changed routers between this time, I also remember seeing some updates for samba-related packages.
All out of ideas, I posted here.
I can post my smb.conf file..or anything else for that matter, if you want. I just want this problem to be solved, and currently am forced to boot into window$ to transfer lots of data. Naturally, I can't do anything during this time, when not in linux....and it kills me a little bit more each time I have to see it
EDIT: Also note that, I tried using the default config, but I still get timeouts(and restarting samba daemon of course). With 'smbtree', it lists all of the shares available on the workgroup also. I also use the gamin program, as opposed to FAM. Originally, I followed the wiki, and that was how I get it working in the first place, but no longer does it work correctly. The logs in /var/log/samba/ do not show anything interesting, and in fact, only show about 1-2 lines, just saying that it started..
I also had it say about a firewall possibly being in use, but on a reload/retry, it returns to a timeout error. I do not have any firewalls that I am aware of, on.
Update: Well I figured out if I run the following command: smbclient '\\NAS\Data' that I will then be taken to a prompt where I can do ls, cd, etc, and browse that share perfectly. What's going on here? Dolphin still times out on it and I would prefer to use a GUI for this..
Last edited by sreich (2009-06-26 17:00:14)

Well I decided to try to use 'smb4k', which I just recently found, it also sees all of the computers on my network, but it also sees their shares after I browse into it. Unfortunately, it fails to mount any of them...
"mount error: could not resolve address for NAS: Name or service not known
No ip address specified and hostname not found"
That is the message I receive after clicking (mounting) on one of the shares of the 'NAS' computer, the one on my network.
Perhaps this error will make things a bit more clear?
I've been even looking at the docs at samba.org, trying to debug this issue...
UPDATE: Seem to have limited the problem down, at least now I can mount a share on a computer but *only* if I specify the IP address manually.
So it appears that it cannot resolve the name of said computer/share, to an IP... what could be causing this, and how can I fix it?
Last edited by sreich (2009-06-26 19:17:12)

Airport error message when trying to connect to internet

Hi,
My iBook G3 has been unable to connect to the internet via our newly installed satellite service. When the service was first installed, it connected, but now it doesn't/ My G4 desktop iMac connects fine but not the laptop.
I have gone into the keychain control, deleted the network and then tried to reconnect, to no avail. The computer knows that the network is there, but can't join.
Another related issue: I get into an endless loop when I try to go into Network in System Prefs. The error message says, "Your network settings have been changed by another application." The same message shows up on my iMac desktop computer, too, although I have no trouble getting online with that computer.
Thanks for any help you can give.

This article may help explain the Error -43
http://docs.info.apple.com/article.html?artnum=107032
Even though the article is about connecting to an SMB share, most of it can still hold true when connecting via FTP.
If you haven't yet, you may want to try using a 3rd party FTP application, such as CyberDuck http://www.versiontracker.com/dyn/moreinfo/macosx/14426
Ben

HT4623 when trying to connect to internet i get an internal error message. All other devices but this phone connects fine.

For some reason this i phone will not connect to our wireless internet. All other iphones connect. As well as computers. I keep receiving an internal error 500 message. Any help?

I assume you are referring to an error message in Safari. When you look at the phone, are you seeing the wifi signal fan by your carrier name? If yes and you go into Settings, wifi and tap the blue arrow to the right of the network, are you seeing IP information? Have you ever been connected to this network in the past?

Keep getting this message when trying to connect to internet

Hi,
I recently changed my WIFI security to WPA2 and now every time I try to connect to the internet I have to reselect my network and this message appears.
There seems to be no way of getting rid of the message and every time the laptop goes to sleep or starts up I have to do this every time.
Please help!

Delete the network from the preferred list by following these instructions. Then add it again.

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

Connection timeout error trying to connect to wireless network

Going nuts...
I have my Time Capsule plugged into an outlet that runs back to my switch (Netgear) which in turn goes into my modem (AT&T uverse).
(the switch runs out to about 6 ethernet outlets in my house)
Everything was working grand until I screwed something up, no idea what, of course!
I have set my Time Capsule set up...
In the AirPort Utility
AirPort tab
Wireless mode:create a wireless network
Connect using: Ethernet
Internet tab
Connect using: Ethernet
Connection sharing: Off (Bridge mode)
From these settings I can see the wireless network I have set up, but I can't connect to it (get a 'connection timeout' error when trying to connect to the wireless network using my laptop)
When I try to change to Conenction Sharing to: 'share a public IP address' or 'distribute a range of IP address', then I get other errors... (DHCP Beginning and DHCP Ending Address Errors).
Any advice would be great - thanks!

Bridge Mode is the correct setting for your Time Capsule.
To aid in troubleshooting, I suggest that you temporarily move the Time Capsule close to the Uverse router and connect directly to one of the Ethernet ports on that device. Test to see if your wireless is working.
If yes, then move the Time Capsule again and this time temporarily connect to the Ethernet switch to test that way.
Keep working your way outward, testing as you go. If the wireless works on the first test when you connect directly to the Uverse router, at some point, you will find the connection problem. It's almost always something simple, like an Ethernet cable that is not making a good connection with one of the Ethernet ports.

ORA-03113 when trying to connect to database

RDBMS Version:: 9.2.0.6
Operating System and Version:: Win2003 Small Business Server
Error Number (if applicable):: ORA-03113
Server Net Version:: 9.2.0.6
Client Operating System and Version:: Solaris10
Client Net Version:: 2.1.3
ORA-03113 when trying to connect to database
I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
Activating traces on the client-side showed the following errors:
-<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
-<ERROR>- nsopen: unable to open transport
-<ERROR>- nsprecv: transport read error
-<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
-<ERROR>- osnqrc: wanted 1 got 0, type 0
-<ERROR>- osnqper: error from osnqrc
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12537
-<ERROR>- osnqper: ns (2) err code: 12560
-<ERROR>- osnqper: nt main err code: 507
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqsm: send-break: failed to send OOB break...
-<ERROR>- osnqper: error from send-marker
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12583
-<ERROR>- osnqper: ns (2) err code: 0
-<ERROR>- osnqper: nt main err code: 0
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqbr: returning 3113
Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?

Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ?

Page/JNI: Exception when trying to connect in 1,page/ContentFetcher InterruptedIOExce

We have upgraded to fro m 3.0.8 portal 3.0.9.8.2 9iAS 1.0.2.2 on database 8.1.7
the system is very fast and run for sometime but after a while we see the following errors in Jserv.log file.
this error causes the whole system to hang and we have to restart apache/jserv.
Any light on this issue will be helpful and very much appreciated.
thanks,
Sunil Bontha
25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: init
[25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: Initializing Discoverer 4i Viewer (4.1.37.82)
[25/07/2001 14:09:15:219 CEST] page/oracle.webdb.page.ParallelServlet: init
[25/07/2001 14:09:15:249 CEST] page/JNI: Cache is enabled.
[25/07/2001 14:09:15:299 CEST] page/Starting a pool of 25 handlers.
[25/07/2001 14:09:43:820 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:830 CEST] page/Timeout occurred, label=145 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:830 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher23
[25/07/2001 14:09:43:840 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:840 CEST] page/Timeout occurred, label=293 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:840 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher22
[25/07/2001 14:09:53:864 CEST] page/JNI: Exception when trying to connect in 1.

Hi Avi,
My application is a standalone application trying to access MBeans present in oc4j.
I tried
using the code
props.put(Context.INITIAL_CONTEXT_FACTORY ,"oracle.j2ee.rmi.RMIInitialContextFactory");
obj = (ManagementHome) ctx.lookup("ejb/mgmt/MEJB");
but i am getting the following error.
javax.naming.NameNotFoundException: ejb/mgmt/MEJB not found
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java
:45)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at TestMBean.doSomething(TestMBean.java:90)
at TestMBean.main(TestMBean.java:237)
java.lang.NullPointerException
at TestMBean.doSomething(TestMBean.java:107)
at TestMBean.main(TestMBean.java:237)
Regards
Siva

Event 6-303014 Syn TimeOut when trying to access a page on Internet

Hello. I have a ASA 5540 (8.4) as an Internet Firewall.
When trying to navigate on Internet through ASA I can do it without problem except one page.
Page is accessible if I navigate without ASA Firewall (for example home Internet)
Reviewing firewall logs, event 6-303014 Syn TimeOut appears everytime I Try to access it.
This page works on port 80.
Thank you in advance for your advice.
Regards
Fernando

Do you see a "3G", "E", or "o" next to the carrier name and signal indicator on the phone? If not, then you are not connected to a cellular data network at all. It's not impossible that you're not in range of their data network. Who is your carrier and where are you located?
If you do see one of those, you may want to call them again and ask explicitly to have them check the provisioning on your account. Just because it looks right in the billing system does NOT mean they have it set up correctly.

WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

MTU test fails when trying to connect wirelessly to Xbox360 live. Firmware is current. I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable. Changing the MTU setting does not work. I have tried several other suggestions found on these boards but nothing seems to work. Any help would be greatly appreciated!

hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

Error message when trying to connect Classic 120GB to iTunes An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerException

I too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying.

WRT54GC setup timeout when trying to connection to internet

Similar Messages

Maybe you are looking for