WRT54GC v.2 won't complete installation on Windows XP

Hi everyone, I've tried most troubleshooting suggestions I can find and still can't get my new router to operate. I am a cable modem user on Windows XP and have been using an old Netgear router with no problems for years. I try to install my new router with the setup CD and it never completes. It always confrims my hardware is setup correctly but says my setup utility cant complete setup ... seems like it isnt reading the router connected to my PC. I;ve tried clearing all settings and reconnecting in the correct order but can never get past the setup stage mentioned ... any thoughts?? thnx

1)connect the computer to the router's port#1
2)connect the modem to the router's internet port
3)access the router using http://192.168.1.1 .. the default password is admin
4)on the web ui , click on the "mac add clone" subtab , enable it and click clone
5)save the settings and do a power cycle
6)check whether the internet works or not ..

Similar Messages

Boot Camp Won't Complete Installation Of Windows 7

i was trying to install windows 7 ultimate 64bit in my macbook pro (early 2011), but in the process of the installation, its stopped and stay still for a longtime. i was hoping it will get through but didnt. i tried several times but still got the problem. is there any solutions for this?

I've a few questions here:
Is your Windows 7 CD one that you bought at retail (a boxed copy) or one burned from Microsoft's online sources (MS Store, TechNet, etc.-an image known in the trade as Electronic Software Distribution (ESD))? Images from non-official sources, and discs not purchased through reputable sellers, may be incomplete or have other problems.
If an ESD copy, did you follow the instructions given to you for a proper burn?
For both retail and ESD copies, did the DVD include Service Pack 1 (SP1)?
Did you print out, and did you follow, the instructions given in the Boot Camp Installation and Setup Guide?
In particular, there is a step that requires you to format the partition labeled BOOTCAMP as NTFS. If you somehow missed this step, you will be unable to install Windows properly.
Get past these, and we can resume troubleshooting.
Nate

I downloaded the latest version but it won't complete installation. It says: Verify that you have sufficient privileges to start system. What do I do now?

iTunes stopped working so I uninstalled it. I downloaded the latest version but it won’t complete installation, giving me a message that says: Service ‘Apple Mobile Device’ (Apple Mobile Device’) failed to start. Verify that you have sufficient privileges to start system. Can anyone tell me what to do next? Thank you.

I tried your suggestion, and what I get is this message: "Error 1053 the service did not respond to the start of contro request in a timely fasion." Any further suggestions? Thanks

Photoshop Elements 10 won't complete installation and won't uninstall.

Photoshop Elements 10 won't complete the installation process and it won't uninstall using the uninstall utility (I get an error message). So I tried deleting all files manually. However, when I re-insert Disc #1 it only offers to uninstall Elements 10 - which it won't do (same error message). So I can't go forward (install) or backward (uninstall). My computer is a Dell Studio 1555 with 4 GB of RAM, 64-bit OS, running on Vista Home Premium. I have 180 GB free of 283 GB on the C drive.

Thanks, Your link took me right to it. Baisley 944
Date: Mon, 11 Jun 2012 21:17:48 -0600
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 won't complete installation and won't uninstall.
    Re: Photoshop Elements 10 won't complete installation and won't uninstall.
    created by photodrawken in Photoshop Elements - View the full discussion
For some reason, my link to the MS FixIt Center didn't appear in my message:http://support.microsoft.com/fixit/ Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4484771#4484771
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4484771#4484771. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

If you use extensions like Adblock Plus or NoScript or Flashblock that can block content then make sure that such extensions aren't blocking content. 
You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Java_es_05q1-windows-x86 install fails 1628: Failed to complete installation on windows xp pro sp2

Hi All,
I'm trying to install Java ES 2005Q1 on my windows xp pro sp2 notebook, but it always breaks with this error message: 1628: Failed to complete installation
I realized that the SUNJavaES.log always ends at line 151 which is 131077 characters long.
These are the last few characters of this line: ..." AD_MANUAL_ES_CONSOLE_HELP=D:\Sun\JES2005Q1\Server-Root\manua l\es\console\help\ AD_MANUAL_FR_ADMIN=D:\Sun\JES2005Q1\Server-Root\manual\fr\ad min\ AD_MANUAL_FR_ADMIN_HELP=D:\Sun\JES2005Q1\Serve "
I attached the last log file.
This line always breaks at the 131077th char independently of the content of it. I tried to skip some components of JES to see what will occur. The current content of this line obviously was different, but it has broken at the same point.
Thanks in advence for any help.

This could be due to a known issue with length of installation path
Can you try and install in a location with less than 8 characters ?
eg: C:\JES05q1 or C:\Sun

HP Officejet 4630 e-All-In-One - Won't complete installation process?

Hello, we are unable to complete the software installation process and keep receiving the message " HP printer installation failure: error 1603(25042)We have unistalled the partial install twice now and reinstalled without the USB cord connected and each time its stops us and says that it's not connecting to the driver. We have Windows XP which to be compatabile so we are not sure what to do? How do I know if it's my hard drive? Thanks

Hi @Patti_C ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else

10.8.4 MacBook Pro Retina 15" won't complete installation

Hello I've tried repeatedly to install 10.8.4 from 10.8.3 normally these updates have been error free and straight forward, however this time the restart begins and it will say wait for about 5-6 mins and then an error message consistently says "an unexpected error has occured, please restart your computer" not once has it been different or ever completed. I've tried repairing the disk to no avail.
Does anyone have anyone suggestions?
its been plugged in everytime with 100% battery as well.

Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).

Windows 7 won't complete installation (2)

Just received a new Asus M51AD-US001O RTL Desktop system, with a Asus H81M-E motherboard, 8GB DDR3, Windows 7 Home Prem 64-bit, which included a new Asus graphics card with DVI & HDMI ports, & a VGA port. I hooked up the monitor to the VGA port,
pressed the power button. Nothing Happened, Oh the system powered up (all fan etc) but no signal from computer. I ed then hooked a DVI/VGA adapter to the appropriate port, Still no signal, nothing on the monitor. I powered off the system, removed
the Asus graphics card, rehooked the monitor to the VGA port and powered up the system. Wala it worked, well untill I received the boot problem screen, which asked if I wanted to boot normally or into safe mode. I chose safe mode. System
started to move but an error screen appeared saying setup could not continue in safe mode, to restart to resume setup. I hit the OK button to restart - Windows Setup Resuming, then another error appears: (Red Circle with a white X) "The computer
restarted unexpectedly or encountered an unexpected error, Windows cannot proceed. To install windows, click OK to restart the computer and then restart the installation". This just cycles, I hit the OK button and the restarting/reinstallation
begins and then the same error appears. We're caught in a loop. Any suggestions???
Thank you.

Hi,
Sounds like a hardware error, you can reset the BIOS to the default configuration, then check what’s the result.
Alex Zhao
TechNet Community Support

Tried to update iTunes on Win7 got a MSVCR80.dll error message. Tried to reinstall as advised, won't complete installation saying I have to verify that I have sufficient priveleges. How do I do that?

I just tried to update iTunes, got an error message MSVCR80.dll and was told to reinstall. Tried to reinstall, at the end received this message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." There is no place to verify anything. Logged in to Apple Store with ID and password. Tried again. Same message!! Help!!

See Troubleshooting issues with iTunes for Windows updates.
tt2

Won't complete installation

Fire fox 3.6.8
32-bit operating system
Vista
Flash player 10
I have downloaded it and it shows up in the Control panel/Programme.
There does not seem to be next to it on the right side any size of the download no MB size.
It hasn't appeared on my desktop as a short cut and when I go to camtasia to play a video it states
The Camtasia Studio video content presented here requires a more recent version of the Adobe Flash Player. If you are using a browser with JavaScript disabled please enable it now. Otherwise, please update your version of the free Flash Player
I have downloaded it. There seems to be a slight hitch in the final process.
Oh, and java script is activated.
Hope someone can help.
jenki1

Hi,
When I try to upload a video and click on url this is when I get the
flash needs updating.
http://vidgoog.s3.amazonaws.com/videos/videos/adplanner/adplanner.html
Thanks,
Ian

HT4914 I suscribed to itunes match, but it won't complete step 3, and just keeps cycling through steps 1 and 2. Help!

I suscribed to itunes match, but it won't complete installation, keeps cycling through steps 1 and 2. Help!

suavedog:
Try this:
iTunes 7.2 for Windows doesn't open

I'm unable to complete installation of Firefox 7 on Windows 7 as it keeps asking to reboot to finish and never does finish the installation.

I'm in need of some assistance please.
I installed Mozilla Firefox 7 yesterday but it has failed to install properly. It keeps asking me to reboot to complete installation but never finishes. I've tried without success to un-install it but it won't un-install either because it never finished installing. I've done a system restore to prior to the install but still have the same problem. I'm at a loss on what to do now. I'd like to fix this without having to format my hard drive or reinstall Windows 7. I've since also tried downloading via a mirror site and installing an earlier version (6.02) but as V7 hasn't finished installing I get stuck with the boot error which reads 'Your computer must be restarted to complete a previous version of Firefox. Do you want to do that now?' I've done that at least 10 times with no success.

You gone about it the wrong way I'm afraid. For future reference; to update version 4.0 to 4.0.1 and for future editions, go to '''Help '''| '''About Firefox''' and then click the '''Check For Updates''' button.
I think what you'll have to do now is follow instructions in this article to uninstall it: http://kb.mozillazine.org/Uninstalling_firefox
Once you've achieved that goal, go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop using either IE8 or 9. Save the file to your desktop when you see the prompt and then reinstall it from there.

Bootcamp Hangs on Completing Installation!!

Hello,
I am trying to install Windows 7 on my MacBook Pro. I have downloaded the Windows support software to another CD and I have been trying to install the Windows 7. It partitions it fine and then it goes into the setup of Windows 7. It gets a check on every thing up to "Installing Updates" After that it reboots and starts the "Completing installation" The three dots will continue to go for a little bit but then after about 4 minutes it just freezes up. Nothing works. The mouse won't work and I can't click any buttons. So I have to hold down the power button. I have done this maybe 5 times. I have looked things up online about freezing and I try their suggestions but none work! I have been trying all day to get it to work but it won't. It is very weird! I try to run it in Safe Mode but it says that I can't do that and it makes me reboot it again in Windows. I am running Mac OS X Lion 10.7.4; 2.4 GHz Intel Core 2 Duo; 4 GB 1067 MHz DDR3; Mid 2010 model. I have enough memory to partition and enough left on Mac. Please help!
-Cameron

Hello.
I have the same problem. I try install windows for a 5 time from a different disc. But installation is hangs on Completing Instalation. I slove this problem. :
- After first hangs on , i'm load to mac os and format disck with windows from disc utility to FAT 32.
- Then load from CD with Windows and launch installation agan.
- After first reboot - load to MAC OS, edject CD and reboot to continion installation Windows.
AND its WORKS!
Maybe problem only in CD-ROM and after first reboot just only edject a CD, and it dont need a re-format disc
I am running Mac OS X Lion 10.8.2; 2.4 GHz Intel Core 2 Duo; 8 GB 1067 MHz DDR3 and 1TB HD; Mid 2010 model.
Sorry for my English.

Windows 7 not completing installation via Boot Camp

Hi everyone,
I'm having a devil of a time installing Windows 7 on my 27" Late 2010 iMac. I'm using the latest version of Bootcamp and a brand new copy of Windows 7. I'm following all the Boot Camp instructions, create the partition (I want at least 150gb), insert the Windows 7 disk and install Windows 7. I choose the partition, format it, then click install. It goes through all the installation steps up until "Completing Installation...", where it will hang.
I've tried now installing Windows seven times. I've redone the partition. I read somewhere that it could be hanging on usb drivers. While I don't have an Apple mouse, I've tried installing it with just my Apple branded keyboard and it still won't install. I've defragged my hard drive, still hangs. I've crossed my fingers. I've cursed at it. Nothing seems to work.
Does anyone know what could be preventing the in

The Elite Technician wrote:
It is the Windows 7 64-bit disc that came with my Dell a while back, but I no longer have that Dell. I have also tried using my Vista Ultimate 64-bit disc and my Windows XP Pro SP3 disc, but none of these worked. Same result - white screen. All of these discs came with my previous PC computers that I used to have, but I no longer have those PCs. Only their discs. Is using discs that came with other computers for those computers the problem? Do I have to use a Windows disc that has not been used before?
Message was edited by: The Elite Technician
The disks that come with PCs most often include only the drivers and applications required by the PC they were made for. You can not use these disks to install on other than the original hardware.
Message was edited by: BobTheFisherman

WRT54GC v.2 won't complete installation on Windows XP

Similar Messages

Maybe you are looking for