WRT54GL Cannot set allowed or blocked times.
Firmware Version: v4.30.12
I am unable to block access to the internet between the times of 10 pm and 12 am.
have tried every possible idea, and have only been able to block from 12 am to 6, but when I try to block from 10 pm to 12 am it tells me that the end time must be bigger than the start.
Message Edited by Mikah on 10-15-2008 08:33 AM
In that case set # 1 to allow to 6 am to 9 am and #2 to 5:30 pm to 10 pm.
Greetings from Northern Ontario, Canada
Similar Messages
-
Cannot set start and finish times for ringtone
Hello trying to create my own ring tone for iphone 3g when i try to set the start time at 1.25 then finish time at 1.55 ,then create acc version wont work but if i do it from the songs start say 0.00 to 0.30 then create acc version it will any suggestions would be great thank you.Start and stop time both checked
Hi,
After released the production order we can not change the date and qty.
If the order in created status , we can change the date & qty.
Do TECO the this production order, and create a new production order with your correct date.
Regards,
Dharma -
I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV. I connected it up to power and with an HDMI cable toTV. It attempts to set date and time and cannot. I cannot get the remote to interact with the box also. Could it be something as simple as needing a new battery?
Hi kybriar,
Thanks for using Apple Support Communities. This article has steps you can take to troubleshoot the remote itself:
Troubleshooting the Apple Remote
http://support.apple.com/kb/ht1722
For the issue of setting the date and time, these articles may help:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
Power off your TV, wait five seconds, then power it back on.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
Ensure that Apple TV is within range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
Check your Wi-Fi network settings on Apple TV:
Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
Choose your Wi-Fi network from the list.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Restart your Apple TV by selecting Settings > General > Restart.
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Cheers,
- Ari -
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?
No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS? -
I am in the UAE and brought over an Apple TV 3rd generation from the US but cannot get it to set the date or time. This product has not been released yet in this country.
Here is the solution:
Download Apple Configurator from the App Store
https://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Follow the directions on this link: http://techjournal.318.com/apple-tv/install-a-profile-on-apple-tv-using-configur ator/
You will need a micro-USB to USB connector --
Be sure the plug in the Apple TV *FIRST* ~b e f o r e~ the USB cable is plugged in.
It works like a charm!!
Enjoy! -
Forms Personalization: FRM-41017- Cannot set UPDATE ALLOWED attribute error
Hey All,
I have a requirement in Projects > Allocation > Allocation Rules which needs a few mandatory columns to be greyed out.
I think that the form is not getting query-able because of the “FRM-41017- Cannot set UPDATE ALLOWED attribute of non-enabled item RULE.OFFSET_METHOD” error when we open the form.
I was trying to set the required property to false for personalization’s done on mandatory columns and see if that can work in suppressing that error. But it did not.
Can anyone help me by telling how to avoid this and make the form query-able?
Any help is much appreciated.
Thanks !Please post the details of the application release, database version and OS.
Please see if (Capital Projects Form Personalizations Error- FRM-41017 [ID 1072660.1]) helps.
Thanks,
Hussein -
Error : FRM-41316: cannot set insert allowed property of disabled item
Hi Forum,
I have a requirement to making the following field non editable Ship Confirm Rule+ in Order Management-->"Release Sales Orders"-->"Shipping" tab
I tried to achieve this using form personalization using the below condition and action
Trigger Event - WHEN-NEW-ITEM-INSTANCE
Trigger Object - RELEASE.DOC_NAME
Condition - :RELEASE.PICKING_RULE is not NULL
Processing Mode - Both
Action Type - Property
Object Type - Item
Target Object - RELEASE.SHIPCONFIRM_RULE_NAME
Property Name - ENABLED
Value - FALSE
I could see the field becomes non editable but when i navigate to "Release Sales Orders"-->"Shipping" tab and press tab button on the field "Trip" I am getting the below error
FRM-41316: cannot set insert allowed property of disabled item RELEASE.SHIPCONFIRM_RULE_NAME
Even i have tried with the following Property Names set to " FALSE " but still the field is able to editable
ENTERABLE
ENTERABLE(APPLICATIONS COVER)
INSERT_ALLOWED
INSERT_ALLOWED(ITEM-INSTANCE)
UPDATE_ALLOWED
UPDATE_ALLOWED(ITEM-INSTANCE)
Please help me to resolve this issue.
Thanks in advance
Regards,
CSKHi Francoiq,
Thanks, As you advised I will post this in E-Business Suite
Regards,
CSK -
In iMovie 11, I cannot set the duration of the photos, iMovie 09 allowed this, anybody know the solution? I use transitions between photos and want to set the timing because I am setting the whole thing to music.
I have been unable to find this error on the help pages
Error 1413 when Updating or Restoring an iPod -
I cannot remember my security questions and I am not given the option to send to an alternate email address because I didn't have one set up at the time. How can I get past this point?
See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact -
FRM-41316: cannot set insert allowed property of disabled item
We are facing an error message while entering the Invoices in Apps R12 . Requested to please look into the issue.
Navigation : CNG India Local AP Super User
Oracle Payables>Invoice >Entry>Invoice
getting the error
FRM-41316: cannot set insert Allowed Property of disabled item inv_sum_folder.doc_category_name
thanks in advance....Please see these docs.
12.1.1 – FRM-41316 Error On Invoice Workbench Forms [ID 862433.1]
R12: Invoice Workbench, get FRM-41316 Error Message [ID 1332977.1]
FRM-41316 Cannot Set Insert Allowed Property Of Disabled Item LINE_SUM_FOLDER [ID 467206.1]
FRM-41316: FRM-41316: Cannot set Insert Allowed property of disabled item APP_FOLDER.TRANS_TO_RECEIPT_RATE When Applying To Foreign Currency Invoices [ID 392368.1]
Thanks,
Hussein -
Cannot set up ipad? says cannot activate the server? try again later--done 10 times already
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
Cheers, Tom -
My AppleTV used to work fine. Someone messed with my Time Capsule, so I had to have it worked on. Since it was messed up, the AppleTV can't function. I reset it and updated everything. It said "Activating" and "setting date and time". After 3 hours, it is still trying to set the date and time. Now what do I do? Thanks for any help.
As I previously wrote in a former post:
I will first assume you are still setting up your new Apple TV. Is this is the case, use a website like canyouseeme.com to check if port 123 is open. If it is not, this is your issue of your Apple TV not being able to connect to the timeserver. Try contacting your Internet Service Provider for help with opening this port.
Otherwise, try hard resetting your Apple TV by disconnecting all power for 30 seconds. If the problem still persists, you may try hard resetting your router by also unplugging all power for 30 seconds.
Hope this worked out well for you. If you are having further troubles you can always connect it to iTunes using a micro-usb and restore it. Lastly, the Genius Bar will be more than happy to fix the problem for you if you'd like to make a reservation for your local Apple Store. -
I got a new ipod touch for Christmas.
Today I was going to put music on it, i was told there was updates.
So I went ahead to do them.
My Ipod is stuck on the screen with the usb cord pointing to the itunes logo.
In Itunes i'm told :
Itunes has dected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
Turning the ipod off - the same screen appears when it's back on.
When I click restore ipod and after restore and update is clicked ; Extracting software loads up at the top.
When its done this is the message I get:
The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.
I've been looking up trying to figure it out myself and have read making sure a setting in Lan Settings in Internet Properties has ; Automatically detect settings checked. I still get the same ipod message.
I've tried holding the power and home key to turn it off, then powering it back on. But that doesn't work.
I installed itunes today, so its up to date - I checked.
I don't know what else to do.
Can someone help me out, please? :}
The operating system was ios 5 something? It wanted to update to 6 i believe.I've tried the top part but now that i've looked to the bottom:
Additional Information
The “hosts” file may also be blocking gs.apple.com.
Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
I put this in the url bar?
When it gives me the list of names, im not sure what to do from there. The steps aren't that clear for me. -
APP (F110) SHOULD ALLOW TO BLOCK BUT NOT ALLOW TO UNBLOCK
Hi Friends.
Deepawali Wishes.
I have one requirement in APP that should allow the user to block the documents which are free for payment(In editi payment proposal) but should not allow the user to unblock those documents which are blocked for payment in FB60/MIRO/F-02/F-47 etc.
Thanks in advance.
SriniDear Srini,
Deepawali Wishes to you too.
Check out the options in the customizing for payment blocks. You can create blocks that cannot be removed at the time of payment proposal.
The path is -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons.
Hope this helps.
Thanks and Regards,
Anit
Maybe you are looking for
-
How to create an Array of Object
Is this correct: Object[] anArray = new Object[5]; Thanks.
-
My dad got an Ipad for his birthday and however he managed to enter the code a couple of times and now it is deactivated. He never synchronizised it with his computer or Itunes
-
Looking up EJBs from a java client
While trying to migrate my application from standalone-oc4j to Oracle Application Server 10g, I ran into the following problem. My application has a stateless session bean. When trying to lookup the bean (from a java client), I get the following exce
-
I used to be able to do this until the recent update. When I am indented, and I use a number as a bullet point, pages used to automatically go to the next number even if I was indented. Now if I type 1. And then return, it just goes back to the far l
-
XML message going for sheduldeld for outbonding process
HI, I am new to XI..during SAP to SAP scenario i am getting message in sxmb_moni XML message schedule for outbounding process. Can anyone tell how it can be converted in checkered flag.