WRT54GL-Does NOT "Connect on demand"-WHY?
It does not, wired and wireless "Connect on Demand enables the Router to automatically re-establish your connection as soon as you
attempt to access the Internet again." This took a day to ID, thinking it was a wireless problem! Finally inadvertently tried the wired PC and it ALSO was "Not Connected" till I went to the router login and hit the "Connect" button.
What is the "automatic trigger" that should "connect" the router - I tried internet connectionsw on 3 PC's 2 wireless and one wired and there was no connection till I either powered off the router or manually "connected" it.
This is the latest firmware (BTW the page says 2009, but the file says 2008!)and version 1.1
Try to reflash the same firmware on the router.After reflashing the firmware,reset the router and re-configure the router from scratch...Now,check...It should resolve the problem !!!
Similar Messages
-
Linksys WRT54GL does not connect by cable at Windows 7
Hi. I have used this router connected to one router acting as a cable modem at a cable connection for years and now running with windows 7, after 24 hours, windows can not connect. It has not problems connecting by wireless. It is curious because it has not any problem connecting at windows xp.
Anybody have seen this?In the command prompt post the results of the below command:
ipconfig /all
I'm guessing your adapter isn't getting IP information. Good troublehooting info will be in the ipconfig output.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini. It does not connect nor make the ringing sound. Why is this and how can it be fixed?
I am haveing same problem canot find itunes.msi
-
Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac -
When I plug in my iPhone, it connects and begins to charge, then asks me to "trust" the computer. When I select "trust", rather than connecting to iTunes, my phone gets disconnected and then it reconnects again and continues to charge but does not connect to iTunes... I have tried restarting both my computer and my phone, I have tried uninstalling and reinstalling iTunes and I've also tried connecting my phone with different USB cables and connecting them into different USB ports... Still nothing is working.
That's how Apple set it up on the Mac.
There is a free application called iExplorer for Mac that allows you to view and copy files from your iPhone.
Hope this helps. -
I am able to connect to itunes but when i try to make a purchase it does not download. any idea why?
When I make a purchase on itunes it does not download but it does not give a message why either. Any ideas??
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service
Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
JamesSame problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(
-
iphone 6 automatically turn on even not connect to charger, why would this happen and how to solve it?
I'm not an apple expert or anything, but after hearing this from a coworker (and doing a quick google search) many of the generic chargers do not work in the 5s (especially after the most recent update.) I'm thinking this may be the problem in your case...the charger is not working so the phone just needs a good charge from either an apple certified charger or a generic that will actually work with the phone. I've read some people are able to pull the cable out, turn it around and then plug it back in facing the opposite direction to get it to work. Many have reported, however, that even when this remedies the cable issue, its still won't charge the phone while it is completely dead (which is likely the case since it won't power on at all.) So if you haven't fixed your problem by now, go buy a new charger and see what happens. You might be able to go into and apple store and borrow a charger there for a few minutes to see if this actually IS the problem. That way you don't waste your money before buying.
-
I have a new HP Photosmart Premium that does not connect to our ATT router we use for 2
We just purchased a new HP Photosmart Premium to work on our ATT wireless router with two laptops. It does not connect to our ATT wireless network with the error "No filtering" FAIL indications. Why?
There could be several reasons for this.
Let's try this: cycle power on the router, let it restart a couple of minutes then try it again.
If that does not work, we may need to adjust some settings in the router. ISP supplied routers are not the best.....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
When I wake my iMac from sleep, the wireless does not connect. I have to shut shutdown and then restart and then it connects. I am running Lion 10.7.3 Any thoughts?
Been waiting along time for this problem to be fixed. Unfortunately the update hasn't help at all and even made the situation worse. Now my airplay connection from iMac to stereo abruptly stops after about 10-15 min. so I have to go over and quit wifi, start it up and find my airport network. Not sure why it always has a problem with the apple airport network. My neighbor's pc network is always there.
-
I have purchased iTunes match but it does not connect to my iPhone.
i have just purchesed itunes match but it does not connect to my iphone, why please
You must be signed into the iTunes Store on your iPhone using the same Apple ID with which your purchased the iTunes Match service.
-
My adobe Flash player does not connect on my Laptop HP Windows 7.
My Adobe Flash 11 Player on my laptop HP Windows 7 does not connect. (or cannot be found even though it is downloaded in the programs
What means "not connect" or "cannot be found"? Do you get any messages?
You write "downloaded", but did you also install it?
What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? HelpContact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list. -
iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.
Maybe you are looking for
-
Error Install Adobe CS6 Master Collection on Windows 8
So I had two errors while installing Adobe CS6 MC on Windows 8. The first was a slew of OS Requirement Not Met Errors and was able to resolve this by running the setup in Compatibility Mode as Windows 7. However, the second error is persisting and
-
Getting square magnifying filter, even though it's defined by a circular object.
So I have created a magnifying effect in AS3 where the BitmapData collected is filtered through a shape that is circular. However, when I test this out, the distortion filter goes beyond the object's circular bounds and creates a square. When I go to
-
Determine if layer is black and white (or desaturated)
Is there a way to programmatically determine if a layer of a PSD is black and white?
-
SRM Portal Reports display problem
Hi, Our SRM & Portal integration is working fine. But when we try to display resports like (login with an organizational purchaser or strategic purchaser) Purchasing --> Reports --> Overview of Approvals Absolutely nothing happens. No error, no log,
-
Hi Experts, I have an internal table with 20 fields, i used that internal table in REUSE_ALV_FIELDCATALOG_MERGE. It's diplayed the output properly. But now i added a new field in the internal table, but its not displaying inthe output even its not co