WRT54GL Linksys Interface problem

Hi there,
I just after trying to configure the router, but unfortunately I can't  get access to the 192.168.1.1 i can't even ping this address. And if I try to install it on XP machine all I get is - that it can't connect to router. I tried to reset the router, was holding reset button for 30sec etc, none of this help. Any other ideas what to do ?
By the way some how internet works fine on the laptop through Ethernet connection. But I can't still access Linksys interface over the web.

First thing is...do not try to acess the setup page of the router from wireless computer...If you are not able to ping the ip address on the laptop then, i guess your laptop is not connected to your network,it might connevted to some different network.
So connect the laptop/dekstop to the router on the ethernet port...now, try to ping 192.168.1.1....If it is still not pinging then, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now Check waht is the ip address you are getting and whether you can ping the 192.168.1.1 address....If yes then, try to open the setup page.

Similar Messages

  • Interface Problems in Yosemite

    Problem shows up when using software other than the native OS X apps.
    If I attempt to close a window behind the app that has focus by clicking the red x part of the semaphore buttons (top left on every window) it will not work unless I change focus to that app by clicking the bar at the top.
    As an example if I'm using Byword to view a document while composing an email in Airmail once I finished and move on to viewing, say a receipt, in Airmail and want to make a copy of that receipt and place it on the desktop. I'm done with Byword and it is covering the desktop so why not close it and get it out of the way. I move the mouse pointer over the red X part of the semaphore buttons and click, nothing happens. I have to bring Byword into focus by clicking the title bar, then click the red x to finally close the window. If the app below Airmail happened to be Safari the red X works properly.
    On my Mac Mini using Yosemite this works properly for all apps.
    This is only a slight problem but I have been having the odd quirky interface problems for the past while and I'm worried that something has gone south and these may end up adding together to make a very large problem.  Initially I had problems with PopClip which seemed to be screwing around with the interface buttons in Rapidweaver 6. I removed the app to clear that problem using AppDelete.
    While trying to diagnose this problem I have removed all the auto login apps that I can and rebooted several times to no avail.
    Any help would be greatly appreciated!
    EtreCheck version: 2.1.8 (121) log:
    EtreCheck version: 2.1.8 (121)
    Report generated February 5, 2015 at 12:32:53 PM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2012) (Technical Specifications)
        iMac - model: iMac13,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                Empty 
            BANK 1/DIMM1
                Empty 
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
            iMac 2048 x 1152
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:0:46
    Disk Information: ℹ️
        APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
                Core Storage: disk0s2 120.99 GB Online
                Core Storage: disk1s2 999.35 GB Online
        APPLE SSD SM128E disk0 : (121.33 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Boot OS X (disk0s3) <not mounted> : 134 MB
            Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
                Core Storage: disk0s2 120.99 GB Online
                Core Storage: disk1s2 999.35 GB Online
    USB Information: ℹ️
        Verbatim Portable USB 3.0 Drive 1 TB
            EFI (disk3s1) <not mounted> : 210 MB
            Verbatim HD (disk3s2) /Volumes/Verbatim HD : 999.86 GB (31.06 GB free)
        Apple Inc. FaceTime HD Camera (Built-in)
        Logitech USB Receiver
        Samsung Electronics Co., Ltd. ML-2160 Series
        Wacom Co.,Ltd. Wacom Wireless Receiver
        Razer Razer 1600dpi Mouse
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Transmit.app
        [not loaded]    com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Click for support]
            /Applications/VMware Fusion.app
        [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
        [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
        [not loaded]    com.vmware.kext.vmnet (0231.47.74) [Click for support]
        [not loaded]    com.vmware.kext.vmx86 (0231.47.74) [Click for support]
        [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
            /Library/Extensions
        [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
        [loaded]    com.avatron.AVExFramebuffer (1.7 - SDK 10.9) [Click for support]
        [loaded]    com.avatron.AVExVideo (1.7 - SDK 10.9) [Click for support]
        [loaded]    com.globaldelight.driver.Boom2Device (1.1 - SDK 10.10) [Click for support]
        [loaded]    com.logitech.manager.kernel.driver (4.10.1 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) [Click for support]
        [loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
        [loaded]    com.eltima.SyncMate.kext (0.2.5b15) [Click for support]
        [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
        [loaded]    com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Click for support]
        [not loaded]    com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Click for support]
            /System/Library/Extensions/Soundflower.kext
        [not loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
        [running]    com.logitech.manager.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.realvnc.vncserver.peruser.plist [Click for support]
        [not loaded]    com.realvnc.vncserver.prelogin.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    at.obdev.littlesnitchd.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.barebones.authd.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.realvnc.vncserver.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    com.sharpcast.xfsmond.plist [Click for support]
        [loaded]    com.sheepsystems.CocoaPrivilegedHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
        [loaded]    de.appgineers.Mountain.Helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [running]    com.ecamm.printopia.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.pia.pia_manager.plist [Click for support]
        [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
        [loaded]    com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
        [failed]    ws.agile.1PasswordAgent.plist [Click for support] [Click for details]
    User Login Items: ℹ️
        WD Quick View    Application  (/Library/Application Support/WDSmartware/WDQuickView.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1Password
        Clip to DEVONthink
        Choosy
        Ember
        Save to Pocket
        Stache
    3rd Party Preference Panes: ℹ️
        AirServer Preferences  [Click for support]
        Backblaze Backup  [Click for support]
        Choosy  [Click for support]
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Hazel  [Click for support]
        Java  [Click for support]
        Logitech Control Center  [Click for support]
        Logi Preference Manager  [Click for support]
        Printopia  [Click for support]
        WacomTablet  [Click for support]
        WDQuickView  [Click for support]
        Web Sharing  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 1.11 TB Disk used: 848.39 GB
        Destinations:
            Verbatim HD [Local]
            Total size: 999.86 GB
            Total number of backups: 101
            Oldest backup: 2013-11-22 16:26:50 +0000
            Last backup: 2015-02-05 15:55:38 +0000
            Size of backup disk: Too small
                Backup size 999.86 GB < (Disk used 848.39 GB X 3)
    Top Processes by CPU: ℹ️
            12%    mds
             2%    WindowServer
             0%    loginwindow
             0%    fontd
             0%    mds_stores
    Top Processes by Memory: ℹ️
        292 MB    mds_stores
        172 MB    SophosScanD
        172 MB    InterCheck
        155 MB    SophosAntiVirus
        120 MB    Finder
    Virtual Memory Information: ℹ️
        3.32 GB    Free RAM
        2.72 GB    Active RAM
        1.40 GB    Inactive RAM
        1.15 GB    Wired RAM
        1.56 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 5, 2015, 12:30:03 PM    Self test - passed
        Feb 4, 2015, 10:59:58 PM    /Library/Logs/DiagnosticReports/RapidWeaver 6_2015-02-04-225958_[redacted].cpu_resource.diag [Click for details]
        Feb 3, 2015, 03:07:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0717_[redacted].crash
        Feb 3, 2015, 03:02:23 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0223_[redacted].crash
        Jan 15, 2015, 08:04:41 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-15-200441_[redacted].panic [Click for details]

    Try un-installing Sophos.
    Sophos Un-install

  • Interface Problems: DBA = Data Pump = Export Jobs (Job Name)

    Hello Folks,
    I need your help in troubleshooting an SQL Developer interface problem.
    DBA => Data Pump => Export Jobs (Job Name) => Data Pump Export => Job Scheduler (Step):
    -a- Job Name and Job Description fields are not visible. Well the fields are there but each of them just 1/2 character wide. I can't see/enter anything in the fields.
    Import Wizard:
    -b- Job Name field under the first "Type" wizard's step looks exactly the same as in Export case.
    -c- Can't see any row under "Chose Input Files" section (I see just ~1 mm of the first row and everything else is hidden).
    My env:
    -- Version 3.2.20.09, Build MAIN-09.87
    -- Windows 7 (64 bit)
    It could be related to the fact that I did change fonts in the Preferences. As I don't know what is the default font I can't change it back to the default and test (let me know what is the default and I will test it).
    PS
    -- Have tried to disable all extensions but DBA Navigator (11.2.0.09.87). It didn't help
    -- There are no any messages in the console if I run SQL Dev under cmd "sqldeveloper\bin\sqldeveloper.exe
    Any help is appreciated,
    Yury

    Hi Yury,
    a-I see those 1/2 character size text boxes (in my case on frequency) when the pop up dialog is too small - do they go away when you make it bigger?
    b- On IMPORT the name it starts with IMPORT - if it is the half character issue have you tried making the dialog bigger?
    c-I think it is size again but my dialog at minimum size is already big enough.
    Have you tried a smaller font - or making the dialogs bigger (resizing from the corners).
    I have a 3.2.1 version where I have not changed the fonts from Tools->Preferences->CodeEditor->Fonts appears to be:
    Font Name: DialogInput
    Font size: 12
    Turloch
    -SQLDeveloper Team

  • Any ideas about interface problems on 2014.1.1?

    On a fresh install of 2014.1.1 on a new macbook pro I am having interface problems. The Edge program locks up after a few minutes or the cursor won't show what's being selected, items disappear, sometimes get the "Save your work, error occurred" message and other odd interface behavior. Are there any known issues or likely culprits that might cause this sort of thing?

    Thanks for jumping in. Yes, I've restored prefs and even uninstalled all (including prefs) and reinstalled. If it helps at all, I run several cloud apps (googledrive, dropbox, icloud, box, transporter, etc.). Other installed items include a Wacom tablet driver, latest Java, Flash player, Logitech mouse driver. Other than those the mac is brand new with no unusual system mods yet.
    Appreciate any ideas.

  • Interfacing problem

    Dear All gurus/experts,
    I need help from you to solve an interface problem. The problem is how to create interface where I want to implement HR application (java) and SAP B1. I am really confusing to the stepwise I must do in creating interface.Do I must define fields/columns, forms, document or report in the SAP B1 side first and then compare to the HR application fields/columnc/forms/documents/reports. The difference between them then fixed and created if required. The main purpose is all the HR process will be handled by HR Application and the data will be sent to SAP B1. The data directly posted to G/L  for example payroll, expenses relate to HR and also pension. is it possible for me to create a template and then the template update to SAP B1 using Data transfer workbench (DTW) ? the application can be updated the data file into CSV, txt, etc. If you have any experience about that, pls share to me.  I appreciate your answer so much.
    TIA.
    Rgds,

    Tks for your answer. Actually it is interfacing other product or solutions, for example human resource solutions or from microsoft dynamics manufacturing module. is it possible to do that ? I appreciate your answer. TIA
    Rgds,

  • Linksys wrt54gl broadband limit problem

    Hello.
    I`ve recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. 
    My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
    The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.
    Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?
    Thank you, Zoli

    It is true that the date for the last firmware update is 10/19/2010, but unfortunately this is an error, because if you try to download the update you will see that the update actually is from 2009 not from 2010.
    You can see it even on the download page:
    Firmware:
    10/19/2010
    Ver.4.30.14
    and the link is this:
    http://homedownloads.cisco.com/downloads/firmware/WRT54GL_FW_4.30.14.005_20091026.bin
    20091026.bin

  • Hi all, just bought a new WRT54GL but having problems

    Hi everyone this maybe a newbie esque question but anyway, I connect to the internet though a Linksys AM200, never had problems, my old USB dongle that I use for my Xbox Live stuff broke so I bought a WRT54GL Wireless Router, but as soon as I set it up I get a pop up saying 'The Router cannot connect to the modem/internet (cant remember which) Try switching the modem off then turn on, Do you want to try again?' or whatever, and I get absolutely nowhere with it, any help appreciated

    Are you connecting the WRT54GL to the x-box or to the modem...? How you are trying to configure the WRT54GL....?
    WRT54GL is a wireless router,not an Wireless adapter and it is not a substitute for the USB adapter.To configure the WRT54GL,you need to hardwired it with the modem.  

  • Linksys SRW224G4 - problem with WebView

    Hello !
    I've bought a Linksys SRW224G4 switch and I have a problem with webview management. I can't use this feature because when I try to open web page, I see "Internet Explorer cannot display the webpage" message. One way to solving this problem is reboot of whole switch, but after some minutes from start to mgmt via web, problem occurs again.
    I've read in internet, this problem is known and it's connected to version of IE, it must be 5.5 or 6, not higher. But these information are old (2007, 2008) and I can't believe that this problem is not been solved yet. I'm using IE v.7.0.5730.13
    Can You help me?
    Some information of my switch:
    Boot Version: 1.0.2 (Date: 17-Aug-2006, Time: 14:55:46)
    Software Version: 1.2.2b (Date: 20-Mar-2007, Time: 11:44:49)
    Hardware Version: 00.03.00
    And "SRW224G4 v1.1 business series" information on front pannel.
    BR
    J.

    You're correct, it requires to use IE version 5 or higher to access
    the web interface of the switch. To further isolate the problem, you may try
    different computer also. If you're getting the same problem, you may consider
    updating the firmware of the switch. Thanks.

  • AP Invoice Open Interface Problem

    Hi,
    Im trying to load invoices through the open interface for AP. I am getting some invoices in but for some reason a large volume of the invoices are being rejected. The open interface is not logging any errors in ap_interface_rejections or on the interface report. It just ignores them. I can see in the log that 900 invoices got selected but only 300 created. HAs anyone had this problem and if so how to get around it?
    Thanks
    Keith

    Hi Keith,
    If this is a production environment I strongly suggest you raise an SR for this issue, as there are some known bugs for rejection of invoices during Open Interface run and Oracle support reps will be able to better help you.
    Please see:
    APXIIMPT: Payables Open Interface Rejects Invoices With Reason - INVALID_GLOBAL_CONTEXT (Doc ID 1548209.1)
    Payables Open Interface Import is not showing some of the Rejected Invoices in the Output Reports. (Doc ID 1476796.1)
    Thanks &
    Best Regards,

  • Iphone Remote App with Linksys having problems

    Okay I have a Linksys Wirless Router, my Laptop and iphone connect to the linksys via wireless using WPA, the wireless works great, I get my iphone hooked to the wireless network .. check stocks, weather, google around.. all that works !
    I use my Remote App on my iphone and sweet that works too ... connects to my library shows my playlist on itunes .. I can play rewind, skip - everything works .. for about 3 - 4 minutes ...:( I play the songs i want click on skip a couple and boom, within 3-4 minutes my entire wireless network is down !
    my linksys goes into a frenzy ... If i leave the remote app alone .. my linksys would run just fine forever ... 3 - 4 minutes into using my iphone remote app and my wireless networks toast ... anyone here having the same issue ?
    I have a airport express that I plan to use as my default wireless router (replacing my linksys) to see if apples own wirless router has this problem as well ..
    I sure hope not ... will keep posted .. but let me know if anyone is experiencing the same problem and if there is a fix ...

    Hi,
    Since I upgraded the Remote software to version 1.3.3 (4) it seems that when I'm browsing the music Library of my Apple TV, I can click on any artist and or album. So far so good, but after selecting, the tracktitle is shown on top of the screen, but the track is not loaded and cannot be played.
    If I unplug my Apple TV then it works again, but after browsing and changing tracks 1 or 2 times, the bug occurs again.
    Martijn I've read your the post and tried to delete the songs/artists that have the word 'Edit' in it, re-synchronized the apple TV with my iTunes Library, but no luck for me.

  • Interface Problem Sync/Async (Open Bridge)

    Hello everyone,
    we made the migration from PI 7 to PI 7.01 EHP1 SP7.
    After this migration, the Sync interface with BPM (Opens Bridge), began to give trouble.
    It turns out that the interface in SMQ2 stand still for a long time, and after some time, timeout error occurs.
    In transaction SXMS_SAMON, I noticed that some processes are in timeout.
    It seems the problem is that the interfaces are entering the SMQ2, in PI can not sue for any reason.
    Has also altered the value of the parameter CHECK_FOR_MAX_SYNC_CALLS most did not.
    Does anyone have any idea how we can solve this problem ?
    Thank you all.
    Marlon

    Interface Mapping is between SOAP Request <--> Your XML message Request Response.
    Only one interface mapping is required.
    Message Interface Required
    1. SOAP Synchronous
    2. XML Request Async
    3. XML Resp Async
    4. XML Message Request Response Sync
    Gaurav Jain
    Reward Points if answer is helpful

  • Intel Management Engine Interface problem.

    Hi evryone, i have problem with Intel Management Engine Interface on my laptop HP Elitebook 8470p, I did:
    - Install driver for MEI by Drivers, Software and Firmware for HP EliteBook ... 
    - Update new bios by Drivers, Software and Firmware for HP EliteBook ... 
    But when i open Device Manager , Intel Manager Engine Interface cannot start (error code 10)
    - When i restart then open Device Manger, device MEI have not list in Device Manager.
    But when I shut down and turn on laptop, device MEI list in Device Manager with error code 10.
    Any body can help me? Thanks.

    Hi bondpham,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
    I hope this helps, good luck!
    I worked on behalf of HP.

  • Releasing billing doc to accounting with FICO Interface problem

    Dear all,
    I have problem while releasing billing doc to accounting.
    When I use TCODE VF02, to release, I got the message :
    Condition type MWST tax code A1 does not exist
    Message no. FF762
    Diagnosis
    When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
    System Response
    The specified amount cannot be posted in FI.
    Procedure
    Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
    I have checked the condition Record MWST for tax code A1 through Analysis, and the value is already there
    I have checked the condition though TCODE VK12, the value is already there
    I have checked the condition though TCODE FTXP, the tax code is already maintain
    when I checked with TCODE VFX3, I saw the Posting Status is Error In Accounting Interface
    I might be not saw it thoroughly..
    What should I do ...?
    Regards,
    Rizki Harris

    Hi,
    Check whether account determination is done in OB40 (by FI people).
    there we have to assign the GL account for that tax condition account key (MWS) with Tax code A1.
    For this goto OB40 and double click on MWS transaction and you can see the tax code and GL account if you maintained here.

  • Vista 64bit and iTunes 8.2.0.23 - interface problems

    I've had these strange iTunes interface issues ever since I moved to Vista 64bit a while ago.
    I can't adjust the volume using the volume slider at the top of the iTunes window (to the right of the Play buttons) The volume slider won't respond to my mouse.
    I can't scroll the library window using the scroll bar on the right side of the iTunes window. I have to either scroll with my mouse wheel or click the arrows at the top and bottom of the scroll bar.
    I also can't resize the library columns. They are either very narrow, or if I double click the column edge they will auto resize, then I am stuck with them set at the widest item in the list.
    I recently uninstalled iTunes, QuickTime, Bonjour, Apple Mobile Devices and the Apple Updater. I then searched my Hard Drive and Registry for anything left over from Apple or iTunes and deleted it.
    I then downloaded and installed the latest iTunes, hoping that these issues would be resolved, but I am still having the same issues with the latest version.
    Any ideas would be welcome.
    I just realized I have another issue. I can't import my playlists from Windows Media Player either. I've added my Music folder to the iTunes playlist (the same one that Windows Media Player users) and went to File -> Library -> Import Play list -> chose my WMP playlist (a .wpl file) -> clicked Open and nothing happens.
    Message was edited by: Apr2009

    Ok, so I saved my Windows Media Player playlist as M3U files and imported them into iTunes. Wow! What a complete mess that made of my library.
    All songs that were on the playlists (hundreds of songs) were duplicated in my iTunes library. iTunes would show two entries for each song. When I right clicked and choose 'Show in Windows Explorer' both entries point to the same song, it just shows up twice in iTunes.
    I cleared my iTunes library file and am starting over. I'm thinking about just going back to Windows Media Player. I've been listening to music off my Blackberry and it's really been fine. Just seemed a shame that my iPod was sitting in a drawer because of all the issues I'm having with iTunes and Vista.
    The original problem I had months ago was that iTunes crashed on Vista and lost all my Playlists. I was so upset I put all my music on my SD card on my Blackberry, because Windows Media Player makes it so easy to back up your playlists. They are saved as files and can be included in any automatic backups (I have scheduled backups to another hard drive)
    I thought with this new version of iTunes I could at least export the playlists to files so they can be backed up, I just don't know if I can face re-creating the playlists in iTunes.

  • Urgent help about Interface problem

      Please take a look at the following picture:
    Description:The vitual keyboard doesn't disappear when I slide to the leftmost "Search :iPhone" and then slide to the right.Whatever I slide the interface It remains until I start an app ! What is the problem?
    Location:China mainland
    OS:iOS 5.1, Not  Jailbreak
    问题描述：如图所示，当滑动到最左面的"搜索：iPhone"后，再向右滑动，该虚拟键盘不消失，此时，不论左滑还是右滑，都是这种情况，只有当点击一个程序时，它才会消 失！
    位置：中国大陆
    <Edited by Host>

    Please ignore - DOH
    Mental Block removed, twas a silly mistake ;-) When I had tried it earlier this way I had made a typo.

Maybe you are looking for