WRT54GL loses connection and won't work without a reset

Hello community,
I bought a WRT54GL 2 years ago, and for the first year or so it worked perfectly. About 6 months ago it started losing connection every few weeks; while my inner network looks fine (can ping all machines on 192.168.1.x) the router loses connnection to the outer world.
Setup:
Cable modem connected to the router
PC connected with a wire to the router
Mac, Wii, PS3, 2 iphones, HP 6500 printer - all connected wirelessly
I know it is not the modem because if I disconnect my pc from the router and connect it to the modem I can connect to the internet.
I tried restarting everything (ie unplug my modem, router and pc from the power socket, then gradually turn them on) and my router failed to connect to the outer world (that is no device connected to the router can access the web).
I tried reseting my router (pressing that little hole in the back with a pin) and then loaded the router with a saved configuration, and it didn't work!
The ONLY thing that works is unplugging everything, reseting the router, and then configuring it *manually* from scratch.
This is extremly annoying as it will happen now every week or two.
Help me please.

Thanks, I updated to the latest firmware last night, let's see if that fixes it.
The thing that bugs me is it worked perfectly for over a year, then after the first power out, kaboom.
At first I thought the power out damaged the router's hardware, but if that was the case it would no go back to work for 3-4 weeks after a hard reset ...

Similar Messages

  • Wifi Suddenly Dropped Connection and won't work

    My iPad suddenly lost connection to my Wifi and asked me to enter my password again to join it. So I did and suddenly none of my internet would work. I tried resetting/restoring my iPad and the network setting as well as messing about with the DNS settings. None worked.
    I went into wifi. Chose the network and clicked on the blue dot open the options. I pressed Forget this network and went to rejoin it.
    This is where I realised how daft I was being.
    I have on the stickies section of my MacBook the WEP password for my wifi. However I had recently changed it so had both the new and old passwords on the stickies.
    I had been entering the old password. However the iPad had accepted this and not gave me any error messages until I could not get onto safari. As the iPad was showing Wifi signal with full bars at times it never occured to me to try the other password.
    Anyway. I did. and. It worked. Notice other people have this problem. May be that they are as daft as me.

    Hi-
    Lovely story, and one that I am sure many, willing to admit or not, have experienced.
    I know that I am guilty of the same, with regard to the wife's iPhone.
    The entire time, I muttered, "What did YOU do?", when it was, in fact, me entering the old password.
    D'oh!!
    Thanks for sharing!

  • SIRI won't work without iPhone reset.

    I have a 5S(7.1.1). After using SIRI, or any voice-text task, I have to reset the entire phone to get the voice-text function to work again. Suggestions? Thanks in advance.

    This may sound like a dumb question but have you checked to make sure Siri is turned on and not restricted?
    Settings>General>Siri
    and
    Settings>General>Restrictions>Siri & Dictation.

  • My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    For anyone else wondering how to fix this, all I did was turn my iPhone off and then turn it back on.

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1363 ipod making clicking noise and won't work

    Ipod making clicking noise and won't work. Display see apple store. We live in a rural area so one is not close!

    OK, I have the 30G w/video and it does that too. I've had it a year with no problems. My husband went on the treadmill with it a couple days ago and after a few songs it froze. I did the whole regime of toggling and pressing menu/select button, I put in on my Bose speaker/charger and it switched to very low battery warning. When I took it off to move to computer it said to connect to computer and use restore (in a few languages). I connected and it recognized it and I did restore and after a few minutes screen came up saying it could NOT restore. Then ipod was unrecognized and then ipod screen gave me the very sad little ipod picture with the support web site. At that point it began making the clicking nose - morris code does describe it but I was invisioning a little nano sprite in there with a chisel!!So, same as you, I go there and it's like a maze trying to find help!! Of course my warranty was up exactly 6 weeks ago!! I tried linking through all the stuff like finding a service provider in my area, contact the "knowledge base" etc., and I can't get anyone! Now what are we gonna do?

  • After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

    Question
    After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

    Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?

  • Macbook won't work without charger

    Hello, I have a late '08 macbook. Originally I had problems with the screen dimming and I took it to a licensed mac repair place and they fixed that. Then shortly afterward the mac wouldn't work unless it was plugged into the charger. At that point I bought a new battery, new charger and updated to 10.7.5. Now the laptop still won't work without the charger. I have tried the trick where you turn off the laptop unplug it and take out the battery hold down power for 5 seconds and then plug in the charger first then the battery. I realize there must be something wrong besides the charger or battery but I'm wondering if anyone has an idea and how much it might cost to fix.
    This happened a year or so ago but this is the first time I will need to use it in a situation were I cannot be guaranteed an outlet.

    Have you tried resetting the SMC  >  Intel-based Macs: Resetting the System Management Controller (SMC)

  • Candy crush won't work without the internet but it did before

    Candy crush won't work without the internet but it did before

    Make sure you have the latest version of QuickTime (7.6.6) installed - if this is missing or out of date there may be no audio output from iTunes (including, but not limited to, playback through Bluetooth devices) or playback may be of poor quality.
    Also check iTunes' Play Audio Using setting in Edit > Preferences > Playback (you will have to restart iTunes for any changes to take effect).  In most cases selecting Direct Sound addresses playback issues when Windows Audio Session is active (though some users have reported the reverse),
    If neither of these solves your problem try installing this alternate version: iTunes 12.1.1 for Windows (64-bit — for older video cards).  The "for older video cards" label is a little misleading, as this also fixes some playback issues, QuickTime and Outlook interoperability errors, and problems with other third-party applications.

  • IMessage won't work without wifi

    When I don't have wifi I can't use iMessage. Before I got the ios7 update I could no matter if I had wifi or not, now it won't work without it. Other people can't send me text message is they are still using iMessage. How do I fix it?

    Hi Jlm,
    Go to Settings>Messages and make sure that "Send as SMS" is turned on. Also, if you want to be able to send longer messages or photos when not on Wifi (i.e., not iMessaging), then also make sure that MMS Messaging is turned on.
    Cheers,
    GB

  • My front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

    my front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.

    Did you try to set it up "as new device" without using the backup afterwards? How to set up your iPhone or iPod touch as a new device
    If this does not work, get it serviced or visit your next Apple Store.

  • I am overseas and bought facetime and it has an internal error and won't work. I'm ******. Any Input to fix this

    i am overseas and bought facetime and it has an internal error and won't work. I'm ******. Any Input to fix this

    http://support.apple.com/kb/TS3281
    Assuming you want Apple to look at iPhone without a charge a good way to
    start is to show you have tried the standard troubleshooting as I
    suggested.
    These are described in the user manual and even under warranty
    the genius bar will expect these to have been tried before they spend time
    looking at an iPhone as normally these steps fix most issues
    However it is up to you
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • My ipod touch used to sync on my old Hp laptop but now it's not even recognized as a device but will still charge on my new asus windows laptop. Itunes on my old laptop is missing something and won't work and I've reinstalled itunes on the HP already.

    My ipod touch used to sync on my old Hp laptop but now it's not even recognized as a device but will still charge on my new asus windows laptop. Itunes on my old laptop is missing something and won't work and I've reinstalled itunes on the HP already. Could somebody please help me to get my ipod touch to sync on the Asus laptop please?!

    Hello hieunguyen2012,
    The following article can help get your iPhone to appear in iTunes on your new laptop.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

    Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

    Hi.  My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

  • Why does my 5s lose connection and require a daily reboot after charging overnight?

    Wondering if anyone knows why my 5s loses connection and requires a daily reboot after charging overnight? I have the latest IOS 8.1.

    this could have countless reasons but it might be your to far from router your router might be haveing electrical problems or your ipod is trying to join to many networks

Maybe you are looking for

  • Embedding OBIEE  in ADF 10g

    Hi, I have a requirement to show fairly complex graphs on an ADF page. We are exploring various options. One of those is OBIEE. I want to know if it is possible to 'embed' OBIEE output on an ADF 10g page. I believe ADF 11g natively supports some grap

  • Custom file logging

    Fellow Developers, I am new to ID CS3 plug-in development and am trying to log commands (implemented a document observer) to a custom log file. Whats the best way to log? - TRACEFLOW (found this macro in another posting)? - MessageLog (found this in

  • Aggragating invoices in SD

    Hi experts, I have two sales order with the same ship-to-party and delivery date. I checked the "order combination" flag in the customer master so that it will aggragate the orders during delivery. The orders are aggregated correctly during delivery.

  • Hp backup and Recovery manager application to download for windows 7 home premium 64-bit file

    where to download file to install HP Backup and Recovery Manager for Windows 7 Home Premium 64-bit? How to overcome 9996 error while installing cyberlink power director for Windows 7 Home Premium 64-bit?

  • Unable to update 2106 bootloader

    Greetings all! I'm having troubles updating my 2106 bootloader from 4.0.191.0 to anything more current. Attached is a log from an update attempt. Any suggestions would be greatly apprecaited! Thanks in advance. -Sam (Cisco Controller) User: admin Pas