WRT54GL v1.1 - Firmware download unavailable !?

Hi
The download for hw v.1.0 works but for hw v.1.1 (http://homedownloads.cisco.com/downloads/firmware/1224638744664/FW_WRT54GL_4.30.16.002_ETSI_20121205... returns a page not found!
Solved!
Go to Solution.

This is the only thing left of that router.
http://homesupport.cisco.com/en-us/support/routers/WRT54GL
Appears all support is dropped including firmware.

Similar Messages

WRT54GL v1.1 firmware upgrade: "upgrade are failed"

I am trying to upgrade my WRT54GL v1.1 firmware. I have downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I have unzipped to yield a file with a .bin extension. I am using the web interface to upgrade the firmware with the .bin file and get the error message "Upgrade are failed" very late in the upgrade process. I have tried resetting the router by holding the reset button for 30 seconds, but this doesn't help. I am using Safari on a Macbook Pro running Snow Leopard 10.6.2. Any help is greatly appreciated.
Solved!
Go to Solution.

Thanks for the tip. I took the router to a friend's house and upgraded the firmware with his peecee running Windows XP and a recent version of Firefox. Rather disappointing that mac support is so poor.

.rmt file missing from firmware download

The readme file included with the firmware download zip file states to look for a .rmt file. There are only .txt files and a .bin file in the zip file. Are the instruction wrong/obsolete or should there be a .rmt file in the .zip file or is the .bin file the real firmware update file?

actually, only the .bin is what you need... even if you have the .zip file, you will need to unzip it and get the .bin (binary file) you will need for firmware upgrade... the text file only gives you information...
"a helping hand in a community makes the world a universe"

Very hard to implement a long process dll or application in TestStand such as firmware download task.

Hi All
In my daily projects there are many firmware download tasks on mass production for kinds of products sucha s phone, mp3, game box and so on. The common download is performed via USB or serial port.
Firmware download is often a long process what will take up to hundreds of seconds. The download application or dll is often provided by customer or the chipset supplier, I have ever call a download dll in TestStand, the only way is to run the dll in another threading and at the UI threading I monitor the dll's log file for status, it looks a very stupid way to do, things oftn lose control.
This time I have to automatically download firmwares to a mp3(Sigmatel chipset), Sigmatel provided an application for parallel downloading what is very unstable, the application often hangs or crash, I tried to update the application source code but Sigmatel says they will not support if I change something.
If someone use the application, he needs to press the START button, if fail, press the STOP firstly, if crash..... everything lose control. In my opinion, even if I change the application to a dll, there are still long processes, I must let TestStand wait there for the log file information? I do not think that is a good idea.
My thought is this is a usual task in manufacturing, could someone please advice me how do you handle this kind of testing in your test station? How to run a long process task in TestStand and communicatio with it and keep everything in control.
Thanks.
帖子被paulbin在04-06-2008 07:49 PM时编辑过了
*The best Chinese farmer*

Hi,
I have used a VC++ dll
Here are some snipptes
void CProcessLoaderApp:ostMessageToProcess(LPPROCESS_INFORMATION lpProcessInformation,UINT Msg, WPARAM wParam, LPARAM lParam)
FINDWINDOWHANDLESTRUCT fwhs;
fwhs.ProcessInfo = lpProcessInformation;
fwhs.hWndFound = NULL;
EnumWindows ( EnumWindowCallBack, (LPARAM)&fwhs ) ;
PostMessage ( fwhs.hWndFound, Msg, wParam, lParam );
BOOL CALLBACK CProcessLoaderApp::EnumWindowRcs5SystemTestCallBack(HWND hwnd, LPARAM lParam)
FINDWINDOWHANDLESTRUCT * pfwhs = (FINDWINDOWHANDLESTRUCT * )lParam;
DWORD ProcessId;
CString Title;
GetWindowThreadProcessId ( hwnd, &ProcessId );
// note: In order to make sure we have the MainFrame, verify that the title
// has Zero-Length. Under Windows 98, sometimes the Client Window ( which doesn't
// have a title ) is enumerated before the MainFrame
CWnd::FromHandle( hwnd )->GetWindowText(Title);
if ( ProcessId == pfwhs->ProcessInfo->dwProcessId && Title.Compare("MyApplicationName_ReplaceThatStuff") == 0)
  pfwhs->hWndFound = hwnd;
  return false;
else
  // Keep enumerating
  return true;
MainStuff:
SetCursorPos(10,23);
m_App.PostMessageToProcess(&g_pi,WM_LBUTTONDOWN,0x01,0x000A0017);
  WaitForSingleObject(Event,200);
m_App.PostMessageToProcess(&g_pi,WM_LBUTTONUP,0x00,0x000A0017);
  WaitForSingleObject(Event,200);
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Where is the firmware downloads for WRV54G

Where is the firmware downloads for WRV54G? I am looking for 2.39.2.e

Hi Steven,
You can download the latest firmware for your WRV54G at the following link:
http://www.cisco.com/cisco/software/release.html?mdfid=282526489&softwareid=282487380&release=2.39.2e&rellifecycle=&relind=AVAILABLE&reltype=latest

My computer recognizes my player but the firmware download wont (micropho

its a zen microphoto and i erased the firmware accidentaly (Do'h) and now the firmware download says my player is not connected
<SPAN class=time_text>p.s. zen microphoto media explorer wont recognize it ethier
Message Edited by dkajake on 09-29-2006 08:03 PM

Try this:
Go into another PC (IF POSSIBLE)
Then install the Zen software that came in your installation CD.
Plug in Zen and download new firmware.
The PC should recognize it and you will be able to get it into the player.
After that you can go back to the other PC and see if it works out (it should).
This worked for my micro a year ago.
Otherwise, contact costumer support. Good luck!!

Here is the message my Iphone 4 is stating "Error no successful firmware download after 60000 ms!! Giving up..."Itunes will not even recognize it, any ideas?

Here is the message my IPhone 4 is stating, "Error no successful firmware download after 60000 ms!! Giving up..."ITunes will not even recognize it, any ideas?

No, it has something to do with the firmware on the phone itself. The phone won't do anything. I have used redsn0w to try and put the firmware back on, no luck though. The farthest I am able to go is DFU mode. The message on the screen says, "Error no successful firmware download after 60000 ms!! Giving up..."

Firmware updates unavailable for most product code...

Hi,
it's over a month now that Nokia has released the latest 40.x.x firmware for its 5800 model, or should I say to a small, privilleged amount of customers? I have purchased a Nokia 5800 via Amazon.de, totally unbranded, product code is 0578314, and up to now, the new firmware is unavailable. Why does it take so long for the firmware to become available at least for the unbranded country versions? Technically, there seems to be no problem at all, since many users simply change their product code and install the new firmware, but I am asking here for an official way to get the new firmware in time. The massive delay in firmware updates for different product codes is simply a pain for us paying customers who want the latest features available.

[quote]
Actually, Nokia already is using a similar system. If your phone is unbranded, you still have to consider if its a Regional or Country Variant (similar to the SE phones, and the China versions I stated above). There are basically two types of unbranded handsets: regional generic and country variants.
[/quote]
This fact is not clearly obvious when you buy a phone, so how does a customer know if he gets a CV (copuntry variant) or any other type of phone before buying? When I bought my unbranded 5800XM, I was still thinking that I get a perfect, free phone, and that firmwareupdates can be applied when available. It was absolutely not apparent to me that I would have to wait three months or so, before I can upgrade my phone to a new firmware, once it becomes available

Trying to Update - Get "Download Unavailable" Code 503

I'm trying to download the update Name: update_SCH-I535_LG1_to_LG7 and it will not update.
I already downloaded this update through wifi, and when it was done downloading, nothing happened.
Now when I go to the Software Update screen it says Download Unavailable under "Status" and 503 under "Code."
The "Check New" button at the bottom is greyed out and I tried booting into safe mode with no luck. I also tried clicking "Software Update" while on 4G and still no luck. I've restarted my phone multiple times and it doesn't seem to work. Any help will be greatly appreciated.

If you successfully downloaded the update, you could check to see if it is on the SD card, or you could boot to the bootloader and see if it updates that way. To get to the bootloader, you have to power down the device, then power back up while holding the home and vol down key. This should take you to recovery, and from there should be an option to boot to the bootloader. If the file was successfully downloaded, it should automatically start applying. This may be a shot in the dark, but based on my experience with Android, if the file is in the proper place, this would initiate the update.

P1006 "Firmware Download Error" for non-administrator accounts

Hello all,
I have a problem with a HP LaserJet P1006 when printing from a user account that does not have administrator rights on a new Windows Vista 64-bit machine.
The error message reads: "Firmware Download Error. The printer was unable to communicate with your computer. Please power cycle the printer, check the connection, and try again."
On the original machine, this problem could only be fixed by unplugging and reconnecting the USB cable. On another identical machine, it still prints, but the error message still occurs.
Everything works great when logged in as administrator. Also, there is no error message for the common user when bidirectional support is disabled, but then the printing is horedously slow and ties up the system.
Anyone else see this error message or have any clues what to look for?

Hi! I don't know how it's described in english, but I will try to tell a solution that worked for me. I just changed the security definitions of Windows for this printer. I'm from Brazil and I really don't know how it's show in english version of Brazil, but I'll try to explain: First of all, you need to log in as Administrator in the domain where the printer is installed. So, go to Start -> Configurations -> Printers and Fax Devices (shown "Impressoras e aparelhos de Fax" for me) Select the printer device that is reporting the firmware download error and open it. Go to the Printer menu (Impressora) and Properties (Propriedades). Select Security in the top of window. Ok, all you have to do is modify the Permissions for the users who have this problem. Allow they all to print and manage documents. This proceedement worked for me, and I hope works fine for everyone too. See you, bye. AtÃ© mais, tchau!

Firmware download for Zen Micro is Fau

The firmware download found here:
http://ie.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Micro&Product_ID=0795&modelnumber=&driverl ang=033&OS=0&drivertype=0&x=26&y=9
(Number )
...is a faulty file. When you download the application and open it, the language choice appears. However it won't let you choose any language, and so you cannot continue.
Anyone know what the story is here? Any remedies to this?
Thanks!Message Edited by eskimo on 03-03-200608:26 PM

Thanks for your replies!
I tried both of your suggestions but neither has worked.
I'm pretty computer-literate so I have a good idea what I'm doing but it's just not working!
Basically, when the list of languages appears on the screen, it's as
if the list is just text instead of links.
The mouse doesn't react to the word "English", or "French" in anyway whatsoever.
Any more help would be hugely appreciated!

WRT160N v3 Incomplete Firmware Download Issue

Using a wired connection I ran the firmware upgrade process. Downloaded firmware Ver.3.0.03 Build 3 07/12/2010 from cisco/linksys site. Mid way through the download, the process halted and exited. Only way to access the router was via the setup CD. However, when I get in, the usual router home page is not displayed. The home page is displayed but, very menu item is titled "Basic Setup." No more menu items for Wireless, Advanced Setting, Status, etc, etc. When I select any one of the 8 different "Basic Setup" menu selections, all that I get is a black page on the browser. Hence, I can't get to the the page to attempt another firmware download. Hate to think that I now own a plastic brick.
Any suggestions?
Thanks,
Mike

According to the scenario that you mentioned you can try to do the 30/30/30 Hard Reset. The following procedure will clear out the NVRAM and set Router back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds....
Then check the connectivity status…

HP P1006 firmware download error

P1006 suddenly stopped working for no reason.
Error just said firmware download error. I hadn't asked for any drivers or downloads.
HP print and scan doctor recommended removing the drivers and reinstalling the most recent one.
So I have done this but the problem still persists.
The documents just sit in the virtual printing tray and no printing happens.
I have scanned my pc for viruses and ludicrously the only detection is the Malsign.Generic.97C which is part of the driver for this product!!
Any suggestions welcome as to how to get this printer working again as it has been brilliant. If it was working last week I don't see why some software glitch should stop it working now.
Many thanks

Hello @MarieCurie ,
Welcome to the HP forum.
I understand you got an error message from your printer, and now it is no longer printing.
I could not find an NVM reset for this unit. I could only find a hard reset.
This is just a different way to say:
While the printer is turned on unplug the power cord.
Wait thirty seconds
Plug the power cord for the printer directly to a wall outlet.
If this does not help, I would call technical support. There will be a support fee, but if they can't get the unit working, then it is refunded.
I recommend this because the firmware is the programing inside the laserjet.
They may be able to provide the NVM reset that I can not locate.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Where can find the site for firmware download?

We plant to upgrade our firmware, and I am looking the site for firmware download.

[http://sunsolve.sun.com]

BB 9790 firmware download problem via Desktop software

Hi , i am using desktop software to download firmware 7.1 for BB 9790 and i always have a problem of the firmware download bombing out at around 95 percent of the total download, and the error says my i must check my internet but there is nothing wrong with my internet.
i have loaded the latest Desktop software but still get the same error, Help!!

Hi and Welcome to the Community!
You can bypass the Desktop Software automated download by, outside of the Desktop Software, first downloading, from the official download portal, the OS package you desire:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Then, install that package to your PC. (If the package is from other than your carrier, you will need to delete the VENDOR.XML files.) Now run the Desktop Software and it should offer you this specific BB OS update.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WRT54GL v1.1 - Firmware download unavailable !?

Similar Messages

Maybe you are looking for