WRT54GL v1.1 firmware upgrade: "upgrade are failed"

I am trying to upgrade my WRT54GL v1.1 firmware.  I have downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I have unzipped to yield a file with a .bin extension.  I am using the web interface to upgrade the firmware with the .bin file and get the error message "Upgrade are failed" very late in the upgrade process.  I have tried resetting the router by holding the reset button for 30 seconds, but this doesn't help.  I am using Safari on a Macbook Pro running Snow Leopard 10.6.2.  Any help is greatly appreciated.
Solved!
Go to Solution.

Thanks for the tip.  I took the router to a friend's house and upgraded the firmware with his peecee running Windows XP and a recent version of Firefox.  Rather disappointing that mac support is so poor.

Similar Messages

  • Upgrade are failed!; WRT54G_v2

    130228_1900est
    hello,
    just troed to update FIRMWARE re our WRT54G_v2
    current FIRMWARE
    Firmware Version: v3.37.7
    downloaded and tried to run
    130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
    BUT got msg'
    Upgrade are failed!;
    WHAT'S WRONG?
    Thanks,
    Steveg722
    USA_RI_02917
    Solved!
    Go to Solution.

    130301_0242est
    @jlbjlb
    seems the link you put is simply the procedure to upgrade the ROUTER FIRMWARE
    I am following steps to do what CISCO calls a MANUAL UPGRADE (downloaded the .bin file for WRT54G_v2; Open ROUTER Setup; Go to FIRMWARE UPGRADE; browsed to the .bin file; hit UPGRADE)
    THIS TIME, reset then powered down then up the ROUTER
    tried to to run the upgrade again but AGAIN, Upgrade are failed!
    Does anybody know what the problem is her and how I can get the FIRMWARE updated?
    Hope so.

  • WRT54G v3 "upgrade are failed"

    I am running the WRT54G router, version 3, and trying to upgrade the firmware. It's been locking up and losing my wan connection on a somewhat regular basis and I thought the upgrade would help.
    When I try to upgrade to the latest firmware I get "Upgrade are failed" while the progress bar is at about 20%.
    Basics:
    WRT54G v3
    have upgraded firmware since purchase - currently running 4.20.6
    trying to upgrade to WRT54G version 3 firmware version 4.30.5
    PC running windows XP
    I am connecting via wired, not wireless.
    Attempts:
    1) Logged into router through web interface and went through Administration-->Firmware Upgrade
    Result: Failed
    2) Downloaded firmware again (in case it was corrupted) and tried through web interface
    Result: Failed
    3) Hard reset of router - held down power 30-40 secs - then tried update through web interface
    Result: Failed
    4) Downloaded tftp program and used it
    Result: Failed
    Can anyone give any other suggestions or tell me if they've successfully upgraded to this version of firmware?
    Thanks!!

    Try this:
    1. Disconnect all the devices from the router. Only the computer used for the upgrade should be the only device wired to the router. Even the modem shouldn't be connected.
    2. Reset the router for 30 seconds. The IP address of the router will be back to 192.168.1.1 after the reset.
    3. Disable all firewall and security software on the computer.
    4. Set a static IP on the computer. Use:
      • IP: 192.168.1.5
      • Subnet: 255.255.255.0
      • Gateway: 192.168.1.1
    5. Force your network adapters speed to 10 Mbps Half.
    6. Make sure you could still ping the router's IP address (192.168.1.1).
    7. Upgrade the firmware thru the web user interface (Administration tab. Firmware Upgrade tab.).
    8. If it fails, use the TFTP utility.
    9. Reset the router for 30 seconds after a successful upgrade.

  • Linksys WRT54G "Upgrade are failed!"

    Hi
    I have Firmware Version: v4.21.1  and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
    Solved!
    Go to Solution.

    No.  You must only use firmware versions for 2.2, nothing else.  Firmware version 4.21.1 is the latest so there is no need to upgrade.

  • WRT54GS "upgrade are failed" is what i get when i try to upgrade.

    i get into the router page , click on administration, click firmware upgrade, click brouse button to find the firmware i just downloaded , the file ends with .bin, and when i click upgrade, it says "upgrade are failed".  any more ideas, i don't like this router..

    hi....this error message comes up when you select a wrong firmware file from the website.....
    ensure that you select the right model no and version no of the hardware unit....download the firmware and if is a zipped file , unzip it first and use the "bin" file for upgrading the firmware....or else if you directly get a bin file on the website , save it and through the ui , upgrade it...
    one more option is to download " tftp.exe " file from ftp.linksys.com/pub/network and save it first... then run the exe file....here under server will go the router's ip add , enter the router password under the password field and browse the firmware file...then click upgrade.reset the router for 30 secs and then reconfigure it...

  • "Upgrade are failed!"

    I tried to upgrade my firmware for my WRK54G router with the file that I downloaded from the Linksys website twice and I keep getting an "Upgrade are failed!" error message. Any suggestions?

    Disable all firewall & antivirus software on your computer .....
    reset the router for 20-30 seconds ......
    Again download the firmware from http://linksys.com/download  .....

  • SSIS packages are failing after upgrade to SQL server 2014

    Hi,
    I have some SSIS packages running on SQL server 2012 .
    After I upgraded to SQL server to 2014 from 2012 , the SSIS jobs are failing on the SQL agent.
    And i can see its related to Data source connectivity to the SQL agent. I hope it not able to identify the connection manager in SQL agent. And connection adapter is not upgraded.
    I read some articles about this and they say it not able to connect to SQL server agent job.
    And, I can see that the package is running if i run manually using SQL 2012 run time.
    Why its not running on SQL 2014 ?
    did i  miss anything while upgrading SQL server 2014 ?
    Please give me some suggestions to solve this issue. 
    And is there any way i can change the SQL server agent 2014 to adapt this and run ?
    Below is the error : 
    The Package filed to load due to error 0XC00100014 " One or more error occurres. There should be more specific errors preceding this one that expalins the details of the erroes. This message is used as a return value from functions that encounter
    errors.: This occures when CPackage::LoadFormXML fails.
    Regards,
    Vinodh Selvaraj.

    I think you have typed this error message by yourself.
    Anyway, as it says there should be more error preceeding to this. Do you have any other errors which describles the exact issue stating at what task it fails?
    If not, then there are various reasons behind this issue. 3rd party connection manager such as Oracle Attunity or it may be 32/64 bit issue.
    You may try executing package in 32 bit mode from SQL Agent Job.
    Please refer:
    http://blogs.msdn.com/b/farukcelik/archive/2010/06/16/why-package-load-error-0xc0010014-in-cpackage-loadfromxml-error-appears-while-trying-to-run-an-ssis-package.aspx
    http://www.bidn.com/blogs/timmurphy/ssas/1397/package-failed-to-load-due-to-error-0xc0010014
    -Vaibhav Chaudhari

  • Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

    Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)."  I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time.  Any suggestions?  Thanks

    Any new info on this? 
    I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro.  Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
    Grrr...

  • Service Pack Update Upgrade Status showing failed

    I have SharePoint 2010 Server. I upgraded the same to SP2. In upgrade status it shows failed but once I run command 
    (get-spserver $env:computername).NeedsUpgrade.
    It shows false. How to check if patch is successful? 
    Please remember to mark the replies as answers or vote as helpful if they help.

    Hi,
    From your description, my understanding is that upgrade status shows failed when you upgrade SharePoint, but when you run PowerShell Command, it shows “false”.
    Have you run the SharePoint Configuration wizard again after the status shows failed,  then check if it will show successful status?
    As upgrade status is failed, you should check if there are some error message in your USL log.
    In addition, you could check the version of SharePoint if it is upgraded to the correct version number.
    Best Regards
    Vincent Han
    TechNet Community Support

  • HT1444 The update vs. upgrade paths are very confusing. I'm running OS X v10.5.8. What upgrade products do I need in order to become current?

    The update vs. upgrade paths are very confusing. I'm running OS X v10.5.8 and trying to figure out what versions I need to purchase/download in order to become current.
    Thank you!

    Phone the Apple Store, order a Mac OS X 10.6 DVD, and run Software Update. If your Mac supports it, buy 10.7 or 10.8 from the Mac App Store.
    (70024)

  • Today, I just updated my iphone software to IOS5.  I forgot to download pics from my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    Today I just update my iphone software to IOS5.  I forgot to download pictures that were on my iphone and since the upgrade they are all gone.  Is there a way to get them back?

    The only restore I can find is from 2010.

  • HT4623 My iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

    y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.

    Try and force iPad into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • I have an sony vivaz, i want to upgrade the software. i had downloaded the upgradtion software. bUt it fails to upgrade, even it fails when i use phone repair in pc suit. What should i do?

    I have an sony vivaz, i want to upgrade the software. i had downloaded  the upgradtion software. bUt it fails to upgrade, even it fails when i  use phone repair in pc suit.
    What should i do?

    Hello @chavanjayesh2001... I wanted to give you some tips for when you can't update the software of your phone:
    -Make sure that the Internet connection is good. If the update process is interrupted it might be due to loss of Internet connection.
    -Try using another USB cable and usb port in your computer.
    -Try using another PC.
    -Temporary disable any firewalls and or antivirus software.
    -Start your PC in “Safe mode with networking” mode. This is done by pressing F8 during PC boot. When Windows is started in safe mode, try taking the update again.

  • The firmware was upgraded on my ipod touch 4g and now the artwork does not appear for the various albums. What to do about this?

    After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?

    Try looking at the previous discussions with your same problem.  Like the ones on the right-hand side of this page under the heading "More Like This".

  • Thunderbolt Display firmware update 1.2 failed

    Thunderbolt Display firmware update 1.2 fails to complete.  I have made four attempts to load this software update.  The odd thing is that the software list shows that the update has been installed.  But every time I check for updates, Thunderbolt Display firmware 1.2 is listed as a needed update. 

    Strange. The downloaded dmg file package said that the upgrade was successfully installed, but the App Store still says I need to update. I haven't tried it with my MBP cover open but I'll give that a shot.
    Thanks,
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Maybe you are looking for

  • How to develop a query in BI Publisher Report

    Hi Experts, I am new to BI Publisher. Could somebody help me how to prepare a query. Thanks.

  • Recording from auxiliary 2 on x

    Good day,?The thing is I want to record a beat?li've playing from fruityloops?while I am skratching from a turntable and that I can cut the sound of both the beat and the vinyl with the cross fader. I use to be able to do it but now I can't and I can

  • Reading Adobe pdf (with search feature)

    Is there a way for me to read adobe pdf's on the iPhone? Anybody mind explaining the best way to do this? And if so, is there a way for me to use the Acrobat search feature that allows you to type in a word and cycle through them in the text? Thanks

  • Xdb.jar and ojdbc14.jar incompatibility ( XMLType.createXML() ) ??

    I am using the latest xdb.jar (from xdk_java_9_2_0_5_0.zip) and ojdbc14.jar and it appears that xdb.jar calls a method that does not exist in ojdbc14.jar. It happens when executing OPAQUE opaque = rset.getOPAQUE("value"); XMLType xt = XMLType.createX

  • Update Statistics of MKPF

    Hello everybody, Table MKPF Statistics are current (|Changes| < 50 %) New Method EH New Sample Size  ??? I am trying to update the Statistics of MKPF & MSEG table using DB20 but it tells me to give some NEW SAMPLE SIZE. The LAST REFRESH FOR MKPF IS: