WRT54GL version 1.1 - upgrade firmware from 4.30.7 to DD-WRT

I am looking for instructions for firmware upgrade. Your input is appreciated.

Well, I guess first thing you need to do is download the firmware for your WRT54GL. Then on upgrading, you could try to access the configuration page of the router, click on Administration Tab and then on the sub tab, click on Firmware Upgrade. So then, you could browse for the file that you have downloaded and then upgrade...
I gues, that's all you need to do...
Ching

Similar Messages

I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

vinayakfrommonroe wrote:
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
Hi: Check out the Apple article below.
https://discussions.apple.com/message/15112985#15112985
Stedman

Error upgrading the firmware from 3.0 to ny version on WLC

Hi All,
Please help me on this issue:-
I am currently running 3.0 version on my WLC 4402 and i want to upgrade it to the latest versions. I am following the correct procedure mentioned in the cisco link but its failing.
The error is TFTP Path is getting as:c:\temp\/ error and the firmware is not getting uploaded,
Plz see the snap shot and let me know what am i doing wrong.

I forgot to add, please read the release notes to see which version you can upgrade to as this will have to be done in stages.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

Problem with upgrading firmware on WRT54Gl

hello i have the WRT54Gl
and i upgraded the firmware from the defulat i think it wa 1.1 to 4.3 and after succesfuly upgrading i am entering to the router configurations and i dont have any bar to click on, nothing i cant choose any option and that from3 pc's,,
here is the print screen pf the thing

Have you upgraded the firmware with correct version number.If the firmware is not correct,you can get the problem like this.
Hard-reset the router for 2 minute,Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now,open the setup page and check.

Original firmware for WRT54GL Version 1.1

It appears that there is no firmware I can download for my WRT54GL Version 1.1. While it may never have been updated from what the router came with from the factory, it would still be useful to have it available. In my case, I would like to revert the router from the DD-WRT firmware to factory specs.
Any suggestions for what I could do?
Dominik Hoffmann

Go to the United Kingdom version of the site where it will show a firmware download for v1.1.
Who knows why it doesn't list for the US.
http://www-uk.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=UK%2FLayout&cid=116685984...

Can't open iPhoto "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." Doesn't work...

I've tried to open my iPhoto and a message box opens up and reads "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." I update this and this message continues to pop up. I've even tried to rebuild it, but no matter what I do the same message appears and iPhoto still wpn't open. Can somebody please help me?!

i'm having the same problem with my iMac (Mac OS X 10.7.5) . i haven't really made any updates to it and yesterday when i tried to access the iPhoto library of my MBP (from my iMac) is when problems started. The iPhoto on the iMac initially said I need to install the recent version of the iPhoto. Since I can't find a 9.0 download, I went to buy the iPhoto on the App store.
When I tried to install iPhoto (version 9.4.3) to the iMac, I got this message:
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto 5 or earlier, so you can upgrade them with the current version of iPhoto. You can download the tool here.
Note: If your library is from iPhoto 6 or later, this tool is not required."
I then installed the iPhone Library Upgrader, but I got the same prompt:
'You can't open your current photo library using this version of the iPhoto. You have made changes to your library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
I guess this takes me back to square one? I am inclined to buy the iLife on eBay with the iPhoto 9.0 version, but needed to know if this is the case before I unfortunately bite the bullet.

Pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help

pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help. Am trying to work on document from office computer at home on laptop.
This is what the pop up says:
You need a newer version of Numbers to open this spreadsheet.
You can download the latest version of Numbers from the Mac App Store.
Thanks,

WS,
At first, it can be difficult to determine which version of Numbers you are using. The user interfaces are different, but if you are new to the apps you may think you are using the new version when if fact you have launched the older version. Make sure you are using Version 3.x. Then you won't get the message that you need a newer version.
Use Spotlight to launch Numbers. After typing Numbers into the search field, pick the result that says "Numbers -- Applications".
Jerry

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

Should I upgrade firmware to Samsung version NK1 (VZW) or stay with Version's latest NG6 (VZW) is asked by Samsung Kies software check?

Should I upgrade firmware to Samsung version NK1 (VZW) or stay with Version's latest NG6 (VZW) is asked by Samsung Kies software check?

Thanks for asking, jrh4054. We always recommend updating your software to the most recent version. At this time, NK1 is the way to go.
http://vz.to/1BkClyB
TamaraH_VZW
Follow us on Twitter @VZWSupport

Can I upgrade directly from elements 3 to the latest version?

Can I upgrade directly from Elements 3 to the latest version?

Yes. But compare prices. Sometimes sites like Amazon have a lower price for the full product rather than the upgrade version. They are identical; so buy whichever is cheapest.

Upgrade to CS 2 from previous version 7.0 upgrade

Hello, sorry if this has been asked before, I couldn't find it if it has. 
I originally purchased Photoshop 4.0 back in the dark ages, which I later upgraded to version 7.0 Upgrade Package. Now I want to upgrade to version CS, CS2, or CS3. Will Photoshop allow me to upgrade from a previous upgrade version? 
And while I'm at it, will CS3 upgrade from version 7?
Thanks for any help.

Roger Swanton wrote:
Hello, sorry if this has been asked before, I couldn't find it if it has. 
I originally purchased Photoshop 4.0 back in the dark ages, which I later upgraded to version 7.0 Upgrade Package. Now I want to upgrade to version CS, CS2, or CS3. Will Photoshop allow me to upgrade from a previous upgrade version? 
And while I'm at it, will CS3 upgrade from version 7?
Thanks for any help.
Yes CS3 will upgrade from Photoshop 7.
But the problem is CS3 is no longer being sold by Adobe or anyone else. When CS4 was released CS3 stopped being sold. with the release of CS4 Photoshop 7 is no longer in the upgrade path.

TS1702 I just upgraded a full version of "ISO Fits" app from App Store 2 days ago but the upgrade wasn't successful. I reported the problem to the developer but had not received any reply. What should I do?

I just upgraded a full version of "ISO Fits" app from App Store 2 days ago but the upgrade wasn't successful. I reported the problem to the developer but had not received any reply. What should I do?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

How to Upgrade datasources from 3x to 7x versions

Hi Experts
How to Upgrade datasources from 3x to 7x versions.
I am planning to upgrade exisisting 3x data sources which are used in data loading are there any risks involved in upgrade
Thanks

Hi,
When you migrate a 3.x DataSource (R3TR ISFS) in an original system, the system generates a DataSource (R3TR RSDS) with a transport connection. The 3.x DataSource is deleted, along with the 3.x metadata object mapping (R3TR ISMP) and transfer structure (R3TR ISTS), which are dependent on it. If a PSA and InfoPackages (R3TR ISIP) already exist for the 3.x DataSource, they are transferred to the migrated DataSource, along with the requests that have already been loaded. After migration, only the specifications about how data is loaded into the PSA are used in the InfoPackage.
You can export the 3.x objects, 3.x DataSource, mapping and transfer structure during the migration so that these objects can be restored. The collected and serialized objects are stored in a local table (RSDSEXPORT).
You can now transport the migration into the target system.
When you import the transport into the target system in the after-import, the system migrates the 3.x DataSource (R3TR ISFS) (as long as it is available in the target system) to a local DataSource (R3TR RSDS), without exporting the objects that are to be deleted. The 3.x DataSource, mapping (R3TR ISMP) and transfer structure (R3TR ISTS) objects are deleted and the related InfoPackages are migrated. The data in the DataSource (R3TR RSDS) is transferred to the PSA.
Regards,
Suman

Will this version of snow upgrade from 10.5.8?

will this version of snow upgrade from 10.5.8?

Yes, Snow Leopard will upgrade Leopard. But you will need 10.6.6 or later if you plan to upgrade to Lion.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Lightroom 6 standalone version upgrade problem from Hong Kong

I am Lightroom 5.7 standalone version user from Hong Kong, the license of 5.7 was bundled with my Leica ME
Lightroom 5.7 standalone version prompted me to upgrade to 6.0 and routed me to Adobe web site, but I can't pay the upgrade version due to incorrect country.
So I tried to get my Lightroom 6 standalone version from Hong Kong Adobe. I paid around HK$680 to get Lightroom 6 standalone upgrade version. There was no platform to select and only one option "multiple platform" in download form, so I select the ONLY option and started to download. However, I got a DMG file finally and I can't install it in my Windows 7 desktop ... What can I do now?
I am very frustrated in upgrading process from 5.7 to 6, it waste me two nights and still can get Lightroom 6 installed in my machine.
Regards,
Kelvin tse

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

WRT54GL version 1.1 - upgrade firmware from 4.30.7 to DD-WRT

Similar Messages

Maybe you are looking for