WRT54GL Wireless not working, wired works fine
My WRT54GL lost its wireless connectivity 2 days ago, while the wired connection works fine and the DHCP server can also assign IP to new devices. Can anyone advise me how to troubleshoot and what can be done in this situation?
I have tried reconnecting under windows and even bought a new Linksys PCI wireless card but the problem remains, I am also quite confident that it not my PC’s problem (although the wireless PCI card is listed as connection #9 instead of 1 or 2 and I have only one wireless card on board), since another wireless device also has problem connect to the router in a stable manner.
Thanks.
Thanks for the reply.
Before I got your advice, the router started working again with no apparent reason other than me changing it to another channel from 11 to 6, although I have previously tried changing channel, re-broadcast SSID, disable security but still did not get a stable connection (no signal after reboot PC). I even bought a new Linksys PCI card just to give it a try although I was certain the receiving side should not be the problem.
Could you please tell me what does “beacon interval to 50 and reduce the RTS and fragmentation threshold by 40 each...save settings” do?
Much appreciated – although I must say I am baffled by what happen and have no idea if the router will fail again.
Similar Messages
-
Intel 6205 wireless not working with Lenovo W520
Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Wireless not working for my Netgear router
i have had my iBook G3 for about 3 years now and the wireless has worked fine up untill a few weeks ago when i moved up to Santa Barbara for school. We have a NetGear wireless router in the houes with one pc hooked up to it and 2 laptops that have wireless. my iBook is the only laptop that will not connect to the Netgear. we have a password on the wireless and when i put it in it says "there was an error joining the selected AirPort network." I know the Wireless is working fine on my computer because when i take it to school it will pick up the wireless and work fine there. is there someone that can please help me?
Taylor,
You've posted in the "Using your PowerBook G4 15-inch Aluminum" forum area. You might be better posting in a forum area that deals with Internet and Networking. However, you need to make sure the router accepts your wireless b signal and you've typed in the correct password (to the letter - upper and lower). -
5233 cell not working fine after new theme install...
My 5233 cell is not working fine after new theme installation.
As soon as i installed new theme MENU options are not coming, Only showing new theme image.
Pls help.Be careful when you install themes or apps. Make sure their sources are reliable and the app works properly on your phone model.
If you want to thank someone, just click on the blue star at the bottom of their post -
Smartform : line type not working fine when used on Next page
Hi ,
Please help on below :
I have a smartform and have line type which is used in printing the items.
When I use this line type on very first page , it works fine.
But for the next page which is the exact copy of first page ,
the line type does not work fine with printing first line item on next page,
it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
But on the next iteration it works fine and does not refresh work area.
Please see why is such abnormal behavior happening.
Regards,
Uma DaveHi Ameya
there might be syntax error. Try to get what exaclty is an error using following code.
CALL FUNCTION <smartform>
EXCEPTIONS
IF SY-SUBRC 0.
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
ERRORTAB = IT_ERRORLIST.
ENDIF.
In IT_ERRORLIST you will get error message.
Regards
Sachin G Patil -
Hi
db version is 9.2.0.8.0
in dev the query is working fine.But in qa the query is not working fine(hanging).I had checked the explain plans.
Both are different.This is due to difference in volume of data.
I am pasting the explain plans of both the queries in qa and dev
qa explain plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 606M| 118G| | 107M (1)|
| 1 | SORT GROUP BY | | 606M| 118G| 524G| 107M (1)|
| 2 | HASH JOIN | | 1869M| 363G| | 50748 (1)|
| 3 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 9066 | 318K| | 331 (1)|
| 4 | HASH JOIN | | 2474K| 408M| 2232K| 50400 (1)|
| 5 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 54396 | 1593K| | 330 (1)|
| 6 | HASH JOIN | | 2474K| 337M| | 31791 (1)|
| 7 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 206 | 3296 | | 25 (4)|
| 8 | HASH JOIN | | 3162K| 382M| | 31745 (1)|
| 9 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 3087 | 27783 | | 25 (4)|
| 10 | HASH JOIN | | 3162K| 355M| 2952K| 31699 (1)|
| 11 | MERGE JOIN CARTESIAN | | 62930 | 2212K| | 14627 (1)|
| 12 | INDEX FAST FULL SCAN | SYS_C0013071 | 2923 | | | 4 (25)|
| 13 | BUFFER SORT | | 22 | 792 | | 14623 (1)|
| 14 | TABLE ACCESS BY INDEX ROWID| CURCY_CONVERT_RATE | 22 | 792 | | 6 (17)|
| 15 | INDEX RANGE SCAN | XPKCURRATE | 22 | | | 5 (20)|
| 16 | TABLE ACCESS FULL | SHIPPABLE_BACKLOG_FACT | 321K| 25M| | 15494 (1)|
dev explain plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 17M| 2978M| | 927K (1)|
| 1 | SORT GROUP BY | | 17M| 2978M| 6504M| 927K (1)|
|* 2 | HASH JOIN | | 17M| 2978M| | 2726 (1)|
|* 3 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 4992 | 180K| | 416 (1)|
|* 4 | HASH JOIN | | 41051 | 5852K| 2872K| 2309 (1)|
| 5 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 69888 | 2047K| | 415 (1)|
|* 6 | HASH JOIN | | 41051 | 4650K| | 1504 (1)|
|* 7 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 206 | 3296 | | 37 (3)|
|* 8 | HASH JOIN | | 52460 | 5123K| | 1467 (1)|
| 9 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 3087 | 27783 | | 37 (3)|
|* 10 | HASH JOIN | | 52460 | 4661K| | 1430 (1)|
|* 11 | TABLE ACCESS FULL | SHIPPABLE_BACKLOG_FACT | 7718 | 414K| | 513 (1)|
| 12 | MERGE JOIN CARTESIAN | | 48941 | 1720K| | 915 (0)|
| 13 | INDEX FULL SCAN | SYS_C0060330 | 1827 | | | 7 (15)|
| 14 | BUFFER SORT | | 27 | 972 | | 913 (0)|
| 15 | TABLE ACCESS BY INDEX ROWID| CURCY_CONVERT_RATE | 27 | 972 | | 2 (50)|
|* 16 | INDEX RANGE SCAN | XPKCURRATE | 27 | | | 4 (25)|
Here is the query
SELECT 'BACKLOG' AS SUBJECT_AREA, 'CURRENT' AS TIME_RANGE
,GEO_ROLLUP.GEOGRAPHY_HIER_KEY
,PRODUCT_ROLLUP.PRODUCT_HIER_KEY
, backlog_FACT.DISTRIBUTION_CH_ID
, backlog_FACT.SALES_DISTRICT_ID
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0) - NVL(backlog_FACT.GC_biilled_AMT,0)) AS billing_backlog_AMT
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0)- NVL(backlog_FACT.GC_DELIVERED_AMT,0)) AS delivery_backlog_AMT
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0) - NVL(backlog_FACT.GC_REV_REC_AMT,0)) AS rev_rec_backlog_AMT
, CURCY.VALID_FROM
FROM fact.shippable_backlog_FACT backlog_FACT
, DIM.DIM_PRODUCT_HIER PRODUCT
, DIM.DIM_GEOGRAPHY_HIER GEO
, DIM.DIM_DATE DT
, DIM.DIM_PRODUCT_HIER PRODUCT_ROLLUP
, DIM.DIM_GEOGRAPHY_HIER GEO_ROLLUP
, DIM.CURCY_CONVERT_RATE CURCY
WHERE
PRODUCT.PRODUCT_HIER_KEY = backlog_FACT.GEF_PRODUCT_HIER_KEY
AND GEO.GEOGRAPHY_HIER_KEY = backlog_FACT.GEF_SHIP_TO_GEO_HIER_KEY
AND ( backlog_FACT.DELIVERY_COMPLETE_DATE IS NULL
OR backlog_FACT.BILLING_COMPLETE_DATE IS NULL
OR backlog_FACT.REV_REC_COMPLETE_DATE IS NULL
AND PRODUCT.PRODUCT_TYPE = PRODUCT_ROLLUP.PRODUCT_TYPE
AND PRODUCT_ROLLUP.HIER_LEVEL_NUM = 4
AND PRODUCT_ROLLUP.CURRENT_RECORD_IND = 'Y'
AND GEO_ROLLUP.SUB_POLE = GEO.SUB_POLE
AND GEO_ROLLUP.HIER_LEVEL_NUM = 3
AND GEO_ROLLUP.CURRENT_RECORD_IND = 'Y'
AND CURCY.VALID_FROM <= BACKLOG_FACT.ORDER_LINE_CREATE_DATE
AND CURCY.VALID_TO > BACKLOG_FACT.ORDER_LINE_CREATE_DATE
AND CURCY.EXCHANGE_TYPE_ID = 'M'
AND CURCY.TO_CURRENCY_ID = 'USD'
AND CURCY.FROM_CURRENCY_ID = BACKLOG_FACT.DOCUMENT_CURRENCY_ID
GROUP BY
PRODUCT_ROLLUP.PRODUCT_HIER_KEY,
GEO_ROLLUP.GEOGRAPHY_HIER_KEY,
backlog_FACT.DISTRIBUTION_CH_ID,
backlog_FACT.SALES_DISTRICT_ID,
CURCY.VALID_FROM;
I analyzed all the tables involved in it.
can anybody give me suggestion in crating indexes or anything else?
Thanks
VeerVeer,
Modify your post and enclose your code and output between \ tags for formatting
\Your code or output goes here
\Now, are table stats are upto date on all the table on QA machine? If not, analyze your table and indexes and re-run your query
Regards
Edited by: OrionNet on May 7, 2009 3:35 PM -
French characters insertion not working fine
Hi all,
I'm using Oracle database 10.2.0.3, i migrate the database from 9i.
My problem is in my new database version i mean 10g when i'm inserting french characters like "éèà" in my database it's not working fine, i check to my old database (9i) it's working and i compare the parameters (NLS parameters they are same). i cannot find where is the problem making this appear, if anybody can help me.
here bellow that i did.
SQL> insert into dept values(0,'échec','éèàù');
1 ligne crÚÚe.
SQL> commit;
And from query i got:
SQL> select * from dept where deptno=0;
DEPTNO DNAME LOC
0 ┐chec ┐┐┐┐
here are some parameters i check:
SQL> sho parameter nls;
NAME TYPE VALUE
nls_calendar string
nls_comp string
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
NAME TYPE VALUE
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_timestamp_format string
nls_timestamp_tz_format string
nls_time_tz_format string
I need your help because it's very important for our database.
regards
raitsarevoI goth nothong, i think it's not yet set here bellow the result:
oracle@ab-db1:/abdb_data2/expdp$ env|grep NLS
oracle@ab-db1:/abdb_data2/expdp$
to my old server (9i) here the result:
[oracle@abillity3db oracle]$ env|grep NLS
ORA_NLS33=/home/oracle/product/9.2.0.4/ocommon/nls/admin/data
[oracle@abillity3db oracle]$
When i run the command env only i got for the new server HPux 10g:
oracle@ab-db1:/abdb_data2/expdp$ env
SFTP_PERMIT_CHOWN=1
MANPATH=/usr/share/man/%L:/usr/share/man:/usr/contrib/man/%L:/usr/contrib/man:/usr/local/man/%L:/usr/local/man:/opt/ldapux/share/man:/opt/ldapux/ypldapd/man:/opt/ipf/man:/usr/dt/share/man:/opt/samba/man:/opt/samba/WTEC_Support_Tools/man:/opt/resmon/share/man/%L:/opt/resmon/share/man:/opt/openssl/man:/opt/openssl/prngd/man:/opt/wbem/share/man:/opt/VRTS/man:/opt/graphics/common/man:/opt/sfmdb/pgsql/man:/opt/sec_mgmt/share/man:/opt/dsau/man:/opt/gnome/man:/opt/perl/man:/opt/sec_mgmt/share/man/%L:/opt/ssh/share/man:/opt/gwlm/man/%L:/opt/gwlm/man:/opt/ignite/share/man/%L:/opt/ignite/share/man:/opt/aCC/share/man/%L:/opt/aCC/share/man:/opt/audio/share/man:/opt/ansic/share/man/%L:/opt/ansic/share/man:/opt/langtools/share/man/%L:/opt/langtools/share/man:/opt/cadvise/share/man/%L:/opt/cadvise/share/man:/opt/image/share/man:/opt/imake/man
ORA_CRS_HOME=/home/oracle/crs
TERM=xterm
SHELL=/sbin/sh
ERASE=^H
SFTP_LOG_LEVEL=3
SSH_CLIENT=192.168.0.45 1525 22
SSH_TTY=/dev/pts/0
SFTP_LOG_FACILITY=2
USER=oracle
LD_LIBRARY_PATH=/home/oracle/oracle/product/10.2.0/db_1/lib
ORACLE_SID=abdb1
COLUMNS=157
MAIL=/var/mail/oracle
PATH=/home/oracle/oracle/product/10.2.0/db_1/bin:/home/oracle/crs/bin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/ipf/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/fcms/bin:/usr/bin/X11:/opt/resmon/bin:/usr/contrib/kwdb/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/graphics/common/bin:/usr/sbin/diag/contrib:/opt/sfm/bin:/opt/upgrade/bin:/opt/sec_mgmt/bastille/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/gnome/bin:/opt/mozilla:/opt/perl/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/hpsmh/bin:/opt/gwlm/bin:/usr/contrib/bin/X11:/opt/ignite/bin:/opt/aCC/bin:/opt/cadvise/bin:/opt/langtools/bin:/opt/imake/bin:.
LOG_SFTP=0
PWD=/abdb_data2/expdp
EDITOR=vi
TZ=EAT-3
PS1=oracle@ab-db1:$PWD$
LINES=60
SHLVL=1
SFTP_PERMIT_CHMOD=1
HOME=/home/oracle
LOGNAME=oracle
SSH_CONNECTION=192.168.0.45 1525 192.168.0.233 22
SFTP_UMASK=
ORACLE_HOME=/home/oracle/oracle/product/10.2.0/db_1
_=/usr/bin/env
OLDPWD=/abdb_data2
And for the old server RHL (9i):
[oracle@abillity3db oracle]$ env
PWD=/home/oracle
ORACLE_SID=abillity
HOSTNAME=abillity3db
LD_LIBRARY_PATH=/home/oracle/product/9.2.0.4/lib:
PVM_RSH=/usr/bin/rsh
LESSOPEN=|/usr/bin/lesspipe.sh %s
XPVM_ROOT=/usr/share/pvm3/xpvm
USER=oracle
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
MACHTYPE=i386-redhat-linux-gnu
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
EDITOR=vi
LANG=en_US
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/product/9.2.0.4
LOGNAME=oracle
SHLVL=1
ORA_NLS33=/home/oracle/product/9.2.0.4/ocommon/nls/admin/data
SHELL=/bin/bash
HOSTTYPE=i386
OSTYPE=linux-gnu
HISTSIZE=1000
LAMHELPFILE=/etc/lam/lam-helpfile
PVM_ROOT=/usr/share/pvm3
HOME=/home/oracle
TERM=xterm
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
PATH=/home/oracle/product/9.2.0.4/bin:/opt/IBMJava2-131/bin:/opt/IBMJava2-131/jre/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
SSH_TTY=/dev/pts/1
_=/usr/bin/env
I saw that in my old server environment variable LANG=en_US is set but in the new not.
What's your advice.
Thanks Nicolas
raitsarevo -
Af:setActionListener can not work fine in the af:iterator in ADF Faces RC
Hi all,
af:setActionListener can not work fine in the af:iterator/af:commandbutton. My code is as below:
<af:iterator value="#{backing_Bean.testList}" var="var" >
<h:panelGrid columns="1">
<af:commandButton icon="images/system/class.png"
text="#{var.name}" >
<af:setActionListener from="#{var.name}" to="#{backing_Bean.testText}"/>
</af:commandButton>
</h:panelGrid>
</af:iterator>The name [var.name] can be shown on the command buttoncorrectly, but when I click the button, the name can not be transferred to the testText in backing bean. why?
Thanks
HartHi,
works for me. Not sure how you want to access to the value, but if the bean is in request scope then the values are only available during this period.
Frank -
Af:richTextEditor can not work fine in the popup dialog.
Hi all:
I want to use af:richTextEditor in a pop up dialog, but it can not be used correctly. The code is like below:
<af:popup id="***">
<af:dialog >
<af:richTextEditor contentStyle="width:100%" value="this is a test" inlineStyle="width:100%" binding="#{backing_myBackingBean.richTextEditor1}"
id="richTextEditor1"/>
</af:dialog>
<af:popup>
The value "this is a test" can not be shown in the editor and I can not write/edit in this rich text editor.
Anyone has some experience on using these components? Please help me.
Thanks
HartHi Frank,
Below is my test code, the text editor does not work fine actually. Can you help me to find where I was wrong using this code OR is is a bug to use richtexteditor in popup dialog?
<?xml version='1.0' encoding='GBK'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=GBK"/>
<f:view>
<af:document>
<af:form>
<af:outputText value="This is test page"/>
<af:commandButton text="PopupRichTextEditor">
<af:showPopupBehavior popupId="test">
</af:showPopupBehavior>
</af:commandButton>
<af:popup id="test">
<af:dialog modal="true">
<af:richTextEditor value="this is for test">
</af:richTextEditor>
</af:dialog>
</af:popup>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks in advance.
Hart
Message was edited by:
harth
Message was edited by:
harth -
Af:setActionListener can not work fine in the af:iterator/af:commandbutton
Hi all,
af:setActionListener can not work fine in the af:iterator/af:commandbutton. My code is as below:
<af:iterator value="#{backing_Bean.testList}" var="var" >
<h:panelGrid columns="1">
<af:commandButton icon="images/system/class.png"
text="#{var.name}" >
<af:setActionListener from="#{var.name}" to="#{backing_Bean.testText}"/>
</af:commandButton>
</h:panelGrid>
</af:iterator>The name [var.name] can be shown on the command buttoncorrectly, but when I click the button, the name can not be transferred to the testText in backing bean. why?
Thanks
HartHi Frank,
I use Jdeveloper 11g preview 2 and ADF rich client to run the code above I have posted.
And I found the reason: I add a render attribute in af:iterator, It is not beacuse of the af:iterator component.
When I set the "render" attribute to "true" manually, then the value can be passed to backend bean.
But I set the "render" attribute to "false" at the start and change to "true" by clicking a button in the same page, the value can not be passed to the backing bean. What's the reason?
Thanks
Hart
Message was edited by:
harth -
Siril not working fine in my i5 with new ios7
Dear sir,
I believe my Siri is not working fine with IOS 7 in my iPhone 5.Only 1 function it works on is call my dad or call contact people. It does not act well, when i ask to do other tasks like message my dad or other contacts / what is the climate / or anything else
It says please try after a little while.
Bit same task are performed better on other iPhones
How to re install the software or how to rectify this issue
Regards
Ashish
<Personal Information Edited by Host>I have asked the hosts to remove all the personal information - this is a public forum (only other users here - Apple does not generally participate) and it is not safe to show email, phone numbers, and addresses.
Good luck! -
S10-3t bluetooth and wireless not working with windows 8
S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....
Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian -
Wireless not working, iPhone 4S, upgraded to OS6, any suggestions?
wireless not working, iPhone 4S, upgraded to OS6, any suggestions?
Take the troubleshooting steps recommended in the User Guide.
-
TOA functionality is not working fine on iPad(iOS6).
Hi,
We have published some content using Captivate 7. The TOA (Button) functionality is not working fine on iPad(iOS6) while its working fine on desktop browsers. It stops working affter few taps.
Thanks,
-Manishmoh1002 wrote:
I have ios 5 on my ipad1 and i was wondering why did not apple add to the ios5 for ipad voice search feature
Do you mean Siri on the iPhone 4S?
It was not realeased on the iPad because it was released only for the iPhone 4S.
or weather app on the notification like iphone or ipod.
Apple has not stated why these are not released for the iPad. -
I recntly updated my iphone 4 to io5...and found that proximity sensor are not working fine... 2 out of 5 times it work...really annoyed with problem..look like a problem in 4.1 os...need urgent help...thanx in advance...and ya proximty sensor was fine before update
I got a new 4s and gave my wife my old 4 after upgrading it to ios5. Now her phone has proximity sensor issues big time on a phone that never did before the update. It hangs up am
nd makes another call while talking to someone. When I'm on the phone with her I can here buttons beeping and then it disconnects. It's making her hate the iphone and wanting to get an Android. Ack! We gotta stop her.
Maybe you are looking for
-
"This is an Adobe Illustrator file that was save without PDf content."
I have a client that has been working on a file in AI CS, never left his machine, but when he went to open it today he gets a message that says this file "was generated by a newer version of Illustrator. Would you like to import this file? Some data
-
Links in emails are freezing up the mail app in iOS 6
When I click on any link in any email, the mail app freezes up. This just started happening after the new iOS 6 update on my iPad 3 wifi. Is anyone else having this same problem, and does anyone know a fix?
-
I have too much music on my computer so i was wondering if there was a an app that would randomize the music that goes on to my ipod everytime i used it
-
Why can't I type a colon or semicolon?
For gmail I need to switch my POP settings - and I need to use a colon in the field. I never noticed whether its all the time or just in that field but i cannot find a colon or semicolon anywhere. Is there any way around this? thanks
-
Reg: Idoc inbound posting
Hi Experts, I am trying to post an Idoc into SAP system from PI. There are almost 50 tables in sap, based on the table name one of the field length should be changed. How to check the table name...is it possible to save those table names in PI and co