WRT54GS blocking IP address

My router appears to be blocking one website. I can't ping the website or IP address. I can ping every IP address around this one IP. I do not see any reason why it's getting blocked. I used another laptop with the same issue using a wireless connection and trying to access the website. If I take the other laptop and plug in my broadband card the website is accessible. So, I know or believe I know it's the router blocking the connection. Any help would be greatly appreciated.

On the linksys setup page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...If that doesn't help then,try to open the ports 443-447 on the router...On the setup page..Click on "Applications and Gaming" tab and then click on "Port Triggering" subtab... On the first line in Application box type in ABC,Under the Triggered Range and Under the Forwarded Range ... in the start box type in 443 and End box type in 447 and check the enable box...

Similar Messages

WRT54G router IP address is the same as my modem's IP address. how to change the routers IP address?

The broadband modem got broken and the ISP changed it to a new modem. Now my problem is I cannot use the router when they changed the modem. The ISP won't provide support since they didn't provide me with the wireless router. I've read through the forum and found that I had to change my router's IP address. WRT54G router IP address is the same as my modem's IP address, 192.168.1.1. I already changed the local IP address of the router to 192.168.1.2, saved the setting, released and renew the ip address. Now, when I connected my internet modem cable to the router, I cannot connect to the internet. I am able to ping 192.168.1.2 but I cannot connect to the ping 192.168.1.1. Please help me do the proper setup.
Thanks!

Hello! I solved my problem but I find the solution so weird. After changing the routers IP address to 192.168.1.2, instead of plugging the modem cable on the Internet port of the router, I plugged it in one of the WAN ports. Presto, it worked. Even my wireless connection is also working.

How to connect to a network that has blocked Mac addresses?

My school has blocked Mac addresses how do I get around this?

lllaass already answered, and JakeStebbings provided as helpful a suggestion as possible.
You might as well mark your own response as "answered" and move on:
That's impossible.

What good is it to have a router that doesn't block mac addresses like its supposed too!!!

what good is it to have a router that doesn't block mac addresses like its supposed too!!!

At 10:30pm I think I'd like to talk this out....Lemme give you some more details and lets get some hardware programmers involved. I think this is a cross-platform conflict or at the remote a outdated hardware problem. What do you need from me to track this issue down? I have been patient and have waited over 1yr or maybe 2, waiting for an update to correct this issue. Alas, there has been no solution to this problem. I have 13 seperate MAC addy's on the network. 1 wired and the the rest wireless(some constant, others random). All on a schedule(some timed access, some all the time). I have macBooks, Labtops, Desktops, Ipads, Ipods, DSIs, Windows7, WindowsXP Pro, PS3, AppleTV and a few random BlueTooths. Not that much.
Anyways, I think somehow there is a hole because of cross-platfom compatability that is making my daughter able to get on the net unless I change the wireless password......
No I have no proof...It's just a feeling

How to block IP addresses or IP blocks through the 5505 ASDM interface, not through command lines?

Is it possible to block IP addresses or IP blocks through the 5505 ASDM interface, and not through command lines? If so, how?

Unfortunately I can't share any information on the router. It's company policy. But, if you could let me know where in the GUI interface of the router where I can find the ACL and how to enter the IPs to block I would really appreciate it.

How to block mac address in 2800 router

sir
how to block mac addresses in cisco 2800 router

Hi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

Block IP Address in J2SE

Hi, im try to make aplication when it can block ip address to access my computer. any body know how to block ip address using java??

Java is not suited. It gets data only after it's been processed by the os. You need somethin that works in the os.

Blocking email addresses

How do I block email address of a particular stalker?

You can't block it, but you can set up a rule to automatically send messages from this person to your trash or junk folder. See http://help.apple.com/icloud/#mm6b1a3f8a.

Blocking email address.

hi, i'm not sure if this has been answered yet, but i was wondering if you are able to block email addresses?
thanks...

The easiest way is to label any email from addresses you don't like as Junk, then they will always arrive in your Junk folder instead of your Inbox, from where they can be deleted without being opened.
If the ones you receive are spam then you can report them to your ISP.

RV016: PPTP Server and "Block MAC address"

So if the PPTP server is enabled, and "Block MAC address not on the list" is enabled under the DHCP settings, will the PPTP client get an IP address?
Similarly, if the PPTP server is enabled and the range of IP addresses configured on the PPTP server screen is outside the IP range of the router due to a subnet mask (like 255.255.225.248 for example), will the IP still be assigned to the PPTP client? If assigned, will that IP have any connectivity to the LAN?
Thank you in advance for any answers!
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

So here's how PPTP works with these two features:
1. The PPTP IP range is a different range than the DHCP range. You get an error message if your PPTP IP range overlaps with the DHCP one.
I didn't test the 'Block MAC' function because since the IP isn't coming from the DHCP pool, I highly doubt any MAC blocking will work.
2. Since your PPTP IP address range is outside of the DHCP range, this point is completely taken off the table. However, if you choose an IP range that's outside of the subnet, you'll get an error message when saving. I also learned that if you set the PPTP IP to just a single number and connect, the router will automatically reject any additional connections since no IPs are available.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

My Wrtg54G and blocking web addresses

HI
I have tried to use the setup to block certin web pages but does not seem to work I did u[grde firm ware to the latest one foe my unit. But still still not workin to block the address I have entered. Has any go tthis to work or is linksys going to have this fixed in a new release.
In the setup 192.168.1.1 under security you can block certain web pages.

Hi hakmacpace,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Big white box with color changing circle blocking google address bar!

There is a big white box with a colored circle in center that's blocking the google address bar. Cant get it off!

Blocked account and possibly blocked IP address

My account was blocked three days ago after I tried to change my payment method. at the same time, my mother's account is blocked as well( we shared a same skype payment method).
I tried to file report and fix the problem, but without any explaination, Skype terminate my account and my mother's account along with my unused 3 month unlimited world suscription, 3 month sigapore subscription and one month china subscription. I lost about 50 dollars without any mentions of refund.
now try to contact my family, I decide move on to register a new account. but as soon i register a new account (with a new email address), and tried to purchase the subscription, the skype will block my new account.
I want to know how to register a new account and pay for a subsciption and possible way to get my refund from my old one.

limj wrote:
1. Skype terminate my account and my mother's account
2. I decide move on to register a new account.
Hello and welcome to the Skype Community.
1. Your account is not terminated - it's just temporarily blocked - and as soon as it is unblocked you can resume using your Subscriptions.
2. That will have no effect. To request that your account is unblocked please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

SPL block on address rather than name in some instances

We run GTS 7.1, and we have the requirement where in some instances (but not all), we need GTS to place a SPL block on a business partner based on the partner's street address and city rather than their name. This is a requirement because there are some "business partners" that we believe are performing inappropriate activities and are using the same address for their companies but are changing their company names often to try to avoid detection. Consequently, we want GTS to block documents when it sees a particular street address and city, no matter what the name of the business partner is. It appears that in GTS 7.1 name is a required field for a SPL record, so it does not allow us to enter a SPL record without a name. We have entered SPL records with a name such as "No Name Listed" and the addresses that should be blocked, but we received inconsistent results (i.e., it blocks on some addresses, but not for others). We also have attempted to adjust the configuration settings related to SPL screening service and modifying our SPL exclusion list, but we continue to get inconsistent results. Can anyone help me solve this issue?
Thanks,
Nate

Hi Nate -
Never had the type of requirement you have posted, but intrigued. Can't validate this in a system, but may be of some help.
Possibility 1:
Assumption:
business specific list type for screening is created.
solution:
use your minimal index threshold to your advantage in the name field...enter the minimum number of characters to prevent the system from storing a search term/index for name when defining the specific SPL entity for your requirement....as well as any other components from your control procedure that you don't want the system to evaluate.
================================================
Possibility 2
(not as ellegant as 1 & likely a performance hit):
Assumptions:
you have a separate legal regulation set up for this specific type of check; as I'm not aware of a manner to assign multiple control procedures to achieve your additional requirement.
Though I haven't implemented multiple SPL regs in a production environment, know it is possible; performance hit would need to be monitored.
solution:
Define Control Procedure for Address Comparison - set up a new one with only your screening criteria : CityAND, StreetAND ( wouldn't think you would want to match purely on City, so an OR statement would not be appropriate)
Control Settings for "Sanctioned Party List Screening" Service - Assign the new control procedure to the new reg w/all the applicable settings for your requirements....& create business specific list type for screening.
Would think that even though name is a required field in the manual Create SPL Entity, it should not actually get screened (use whatever you want); as it would not be included in the new control procedure.
feel free to give the above a try if you haven't already done so.
Regards,
Jon
Edited by: Jon Sledge on May 13, 2009 2:07 AM
Edited by: Jon Sledge on May 13, 2009 2:56 AM provided second possibility

WLC - block MAC Address

Wireless system with 3 x WLC-4402, version 6.0.199.4, about 100 AP, about 300 clients.
I need to block some clients that are bombarding me with frequent and repeated "Signature attack" (Auth flood).
I tried to put the MAC Address in the black-list (Disabled Client), but it seams non work.
Other suggestion ?
Claudio

If its an authentication issue, then you can enable client exclusion on the WLAN also. 3 failures will automatically put them in the exculsion list. Not that I like pgrading, but the latest versions of 7.0.x are pretty good, but you need to make sure your AP's support that code. 6.x is pretty old.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

WRT54GS blocking IP address

Similar Messages

Maybe you are looking for