WRT54GS .. Call of Duty World at War..enabling port forward

Now i could do with a bit of help here, i contacted the technical support team. I was given the numbers 28960 to enter into the start and end of my port range forward. there was nothing to put in the application column just tick the enable box. But this still did not allow me to play my Call of Duty WaW online. i also changed my ip which caused my whole internet to go down so i had to put the router back to factory setting.Now this morning i had a email which gave me the firmware update ...still no joy ....Also the game does say that they recommend not to use routers, but if you do enable port forwarding.. so now i shall get back to linksys live chat and start again ... If anyone has any idea i would love to here from you ...Many Thanks in Advance

First check if you can play the game when directly connected to the modem. If it works then some ports needs to be opened the router. Get the port information and then open them, for a test purpose enable the DMZ  on router and check if it works.

Similar Messages

  • Call of duty world at war

    soo i got a macbookpro 4 with the 8600mt 512 with 2 gigs of ram i was just wondering if any 1 has played the new call of duty world at war game and gets any good framerate i know i don't i get like 30 fps any tips or ideas?
    Message was edited by: freak45

    I havent played World at War, but I do play alot of Call of Duty 4 online and in game, I havent experienced any issues and would say the graphics on my Nvidia 9600 256mb are sweet.

  • Call of duty world at war : Nazie zombies Any good ?!

    Call of duty world at war : Nazie zombies Any good ?! Would u recomend it ?

    I am just getting used to the trial version for my Ipod, but so far I love it. It is obviously a different experience than the PS3. But if you're addicted, you can take care of your zombie jones with the box, a variety of weapons including the raygun and three rounds on the trial version for free.

  • Why does call of duty world at war crash on ios6?

    Why does call of duty world at war crash on ios6?

    You can try here. However, you umay have to wait for an update to the app.
    iOS: Troubleshooting applications purchased from the App Store

  • TS2799 call of duty world at war zombies does not work

    I had purchased this game yesterday and it will not start

    Note that the current version of Call of Duty World at War: Zombies does not work on the new iOS 4.2.1 - it crashes each time. This is due to the intro video. I have a support call logged with Activision on this but they don't seem to be to bothered hence why I will ask for a refund and not bother with their products going forward.

  • Call of Duty World At War Zombies

    Hello to all the people,who browse this forum!I have a question.How can I download Call of Duty:World At War:Zombies for iPad?I have tried very many times,but all I've got is only cheats and guides and it says,that there is no COD:Zombies for either iPhone or iPad.Very strange.Maybe,because I'm located in Russia...
    Message was edited by: Airwolf1001

    Note that the current version of Call of Duty World at War: Zombies does not work on the new iOS 4.2.1 - it crashes each time. This is due to the intro video. I have a support call logged with Activision on this but they don't seem to be to bothered hence why I will ask for a refund and not bother with their products going forward.

  • How to enable port forwarding in WRT300N

    i have WRT300N installed in my office
    need to give RDP session to 2 differnet machines connected in my router from outside i have T1 link
    with valide IP configured for the router
    please help me 

    To access your computer using RDC from a Remote location, Follow the steps below.
    Login to the Router setup page and click on Application and Gaming tab and under "Single Port Forwarding" in the Application Name type "Comp A" and in the Start Port : 3390 - End Port : 3389 , Protocol : TCP , Enter the IP address of the Computer and check the Box Enable.
    For 2nd Computer in Application Name : Type "Comp B", Start Port : 3391 - End Port : 3389 , Protocol : TCP ,  Enter the IP address of the Computer and check the Box Enable and click on Save Settings... 
    Once you are done with this settings, to access your computer using RDC from the remote location, Note down the WAN IP, which you will find it under the Status tab. To connect to your Computer A, in RDC type WAN IP:3390 and click on Connect, it will let you connect to Computer A. 

  • Setting up Time Capsule as primary wireless router and enabling port forwarding

    I am attempting to setup my Time Capsule as the primary router on my wireless network. I have an Actiontec Verizon FIOS router that I am connecting the TC to using ethernet, and I was then going to turn off the wireless function on the Verizon router so that the TC will be the only wireless router. I am not exactly sure how to go about this, and I also have to connect a wireless device to the TC that requires a static IP address and port forwarding enabled so that I can access from my iPhone. I am completely lost on how to do this, any help will be greatly appreciated.

    Unless Verizon has made a major change in the last few days, you will not be able to use the TC as the primary router......simply because it is not possible to configure the Verizon router to act as a simple modem......which is what it must do if you want to have the TC act as the primary router on your network.
    As LaPastenague has explained. turning off the wireless on the Verizon modem/router will not make it a modem.  It will still be a wired modem/router in charge of the network, not allowing the Time Capsule to take over the role of main router for the network.
    But, let's assume that I am wrong. Please check with Verizon support and ask them........
    1) If it is somehow now possible to configure their modem/router to act as a simple bridge mode modem. If they say that this is not possible (or they will not support this).....
    2) Ask them if they can provide you with a simple, bridge mode modem......instead of the modem/router that you have now. A simple modem will have only one Ethernet port, and it will not offer any type of routing or wireless service at all.)

  • How do I set a "fixed local address" and enable port forwarding?

    We are using an iMac G5 with an Airport Express (bought back with the G5 so it's a bit old) and I'm trying to set up the computer so that I can use it with Bosco's Screen Share.
    According to the instructions (see step 3) I need to "set your computer’s fixed address on your LAN." so that the Airport will forward a specific port. How do I go about doing this? In my network prefs the Airport is set to use DHCP. Is there something in the Airport Admin that I need to set?
    I'm unsure how to go about doing this, any help is greatly appreciated.
    Chris

    So I should create another location (in the Network prefs) specifically for screen sharing?
    If you are going to switch back and forth between the settings then go ahead but there is no need to do it.
    Would I set the port forwarding in the Airport Admin under port mapping?
    Yes

  • WRT54G v.3 Port Forwarding Reset Problem

    I have a Linksys WRT54G and I've had it for well over 3 years. I've been using another Wired router as a DHCP server and only used the wireless router for wireless access.
    But recently, I took the wired router away and began using the WRT54G. I set up everything correctly including Port Forwarding, but the strange thing is that whenever I reboot my computer, the port forwarding service stops. If I enable it, disable it or do anything else, it still won't work.
    The only way to fix this problem is to 'Reset Factory Settings' every time, but it gets really frustrating doing it every day. Has anyone else had this issue? P.S. - I have the latest firmware.
    Message Edited by DaLink on 02-07-2008 03:30 PM

    Checking back after 1 month, I still have this problem, no workaround found. Can anyone lend a hand?

  • FiOS and World of Warcraft...Port Forwarding Issue

    So for some reason ever since I got FiOS I havent been' able to connect to WoW. Last night I tried to tackle the problem. I following the directions on portforward.com to forward the port in my router. I set it up but when I try to check for the open port via a port check website is says the port ISNT open.
    I am using an iMac G5 with a Westel router. anyone else experience this problem? If so how did you fix it. I called Verizon support and was informed that 'port forwarding is unsupported and we won't help you'
    About ready to cancel FiOS and go back to cable.

    #1 Are you trying to connect to other users OR are you trying to allow other users from the net to connect to you?
    #2 Which port checker site did you use?
    #3 I know that it did not say open OR Success. What did it say?
    #4 What is security level of the router set to? In the guides for that router, they show typical (medium).
    ^^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Port forwarding and DMZ refuses to work properly on WRT54G wireless router.

    I have a network setup on the wireless WRT54G version 8 (with latest firmware) router and port forwarding and DMZ refuse to work correctly. I'm trying to use bittorrent and connect my xbox360 to my computer and neither work properly even after setting up port forwarding in the "Applications and Gaming" tab.
    here's a screenshot of my port forwarding page:
    http://img205.imageshack.us/img205/1497/linksysbg2.jpg
    here's a screenshot of the DMZ page (my computer's IP ends in 102 obviously):
    http://img510.imageshack.us/img510/2131/linksys1rf5.jpg
    now, I've experienced this type of problem before. On a different linksys router a year or 2 back I remember the DMZ never working on that one either and I eventually had to buy a d-link router which worked perfectly. I'm only using this wireless router because it's my roommates and he brought it up. Somebody please explain to me why this isn't working correctly. I am becoming more and more frustrated as I lose faith in linksys routers. Thanks

    Did you tired upgrade of the firmware on the router??
    Also after upgrade reset & reconfigure the router for few seconds ... so that the firmware works properly for longer time ....

  • WRT54G router and call of duty online gaming

    I just bought the WRT54G wireless router and had no problem installing it. I was able to get internet connection on the wired desktop and the wireless laptop. However, when I start playing 'Call of Duty 4' online, within a couple of minutes I start to lose internet connectivity until it completely goes out. At the same time, I will lose connectivity on my laptop as well. In one iteration of fixing this problem, my laptop displayed a message that said something about an 'IP address conflict'.
    I called tech support and tried a few different changes in configurations, including changing the MTU to 1400 and creating a static IP address in the 'Accessibility and Gaming' section of the Linksys configurations.
    I read several other posts that mention a gaming wireless router (WK300TN or something like that). Do I need that even if I'm gaming on the wired desktop and not on the wireless laptop? Help!

    yes WRT310N, WRT330N etc are build for good performance in gaming. Those would definitely improve situation.

  • Call of duty serial number and star wars Lego Saga not working

         asks for serial numebr and i give it and then it's invalid?

    Joshua...
    You need to contact the app's developer for instructions.
    For Call of Duty here.
    For Lego Star Wars here.

  • HT1338 HAVING TROUBLE INSTALLING A GAME CALLED WORLD OF WAR CRAFT 3

    HAVING TROUBLE INSTALLING A GAME CALLED WORLD OF WAR CRAFT 3

    If you're talking about WoW, it's already playable in Lion, just download the latest version.  If Warcraft 3, as I said, it's probably never going to be updated by Blizzard at this point.  It's a very old game and would probably not earn them enough to be worth the expense.

Maybe you are looking for