WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router.  I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

Similar Messages

  • HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think  i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

  • Can not acces the router's set up page

    I am trying to access the router's set up page and can't.  I typed in 192.168.1.1 and typed in the word "admin" in the password (left the username blank), and get nothing.  I tried unplugging, and resetting the router and still dont get anything, it just keeps asking me for the right password.  Can someone help me please?  I need to get my passphrase (which I forgot), so I can access my wireless internet.  I never needed this before now, so I don't remember what it is.  I was able to get online just fine, but now all of the sudden it is asking for my passphrase.  Can someone please help.
    Thanks

    To view the router's web pages:
    You do not need an Internet connection. The router's "web pages" are built into the router.
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall.
    Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
    If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
    If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

  • Laptop can not find the router.

    Yeah. First of all I'm not so technical so... sorry. Fancy internet talk and such would most likely confuse me.
    First of all, I bought a WRT54G2 router. The Staples employee assured me that I'd be able to connect me and my sister's laptops to the internet.
    I setting it up exactly as was instructed by the CD-Rom, yet when I go to my laptop and "View Available Wireless Networks", the router does not appear on the list. Despite this though, I've managed to connect my Nintendo DS to the internet. So... where does the problem lie, and what should I do?
    Solved!
    Go to Solution.

    Open an Internet Explorer browser page on your wired computer(desktop/laptop).In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • N9 Can Not Detect the Sim Card

    Hi Guys,
    I have N9 which was dead due to some reasons, I just gave to Nokia Care and they have reinstalled the software and returned to me.
    I insereted my microsim and it didn't detected, they Nokia people used their sim card and that worked. I just bought another new sim card and put it in, it worked let's say 2 hours but now again showing the icon of "No Sim Card". I tried restarting, removing sim and inserting again etc...but till now no Luck.
    I am extremely angry as I paid a huge some for this device and it didn't work for me. I just bought it 2 weeks back.
    Any Idea what could be the problem, I am going to sue the mfs if they are not going to give me a new device or money back.
    Thanks.

    If it stops recognizing the sim card after a while it could be due to wear and tear, but since it's new and you have tried a new sim card I would say it's obvious that there is a hardware fault with the device. Could be the contacts reading the sim card.
    Get it replaced or take it back for repair. They should be helpful fixing this.
    Hope you get it sorted and you become a happy camper as I am - so far

  • Wre54g v1 can not detect the wireless card

    when I start the setup it shows me this error and I cannot continue the setup...I have win 7....I have tried to configure it manually but I have failed...how can I do to solve this error?

    You can follow this link and it will help you configuring your expander manually, without the setup disk.

  • IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

    Guys I really need your advice please...
    I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
    By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
    Thanks in advance.
    ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • Windows 10 elitepad in Dock can not detect VGA monitor

    Windows 10 will not detect my external monitor.  I loaded Winbdow 10 on elitepad 1000 about 2 days ago.  This is the first time I've tried to use my extenal monitor.  My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81.  I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock.  Now tablet can  not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in .  I've run the detect monitor several times.   Any one got a solution.  The new HP support page does not even list tablet as an option for display support. Thank you 

                Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but  accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
              So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

  • I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
    You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
    You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!

  • On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • My i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens. What should I do?

    my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
    What should I do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too.

    I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help.  can anybody help me with my problem? thanks!

    When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
    Also have you tried all possible troubleshooting steps found over here
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

  • I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

    I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device.  The rest of the screen is blank; all menus are blanked out.  What do I do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

    I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light.  When I get into airport utility it attempts to scan for the device but can not detect it.  The utility screen is blank - nothing to select or configure.  The menus are also blank.  What do I need to do?

Maybe you are looking for