WRT54GS cannot detect an active internet connection. HELP!

Ok well just recently, I don't know why though but my router won't detect an active internet connection from my Cable Modem. I have my Router and Modem connected so I can play Xbox in my room. Well since my router can't detect an active internet connection now since the new Xbox update doesn't allow you to enter the encryption key anymore, I can't go on Xbox live because of it. I've tried changing the ethernet cable in different ports and it still doesn't work. If someone can please help me with this, it would be greatly appreciated. Thanks.
Solved!
Go to Solution.

You should reset your router and re-configure it...
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button.
To re-configure your router follow this

Similar Messages

  • Itunes cannot find an active Internet connection

    Hello
    I've tried several times to activate my Itunes, and its radio stations. But I get an error message stating to check my network is active. It is active. I can get on the Internet with Safari. I even downloaded the new Itunes upgrade 8.01(12) and it is still not connecting.
    Does anyone have any ideas on what I can do to solve this issue?
    Thanx

    Hello Running
    I just talked to an Apple Tech person, and they helped solved the issue that we both have.
    What he did was have me go into Preferences, and then Network.
    In the Location tab (at the top) he had me make a new location which I called Home
    Took it off automatic (He said automatic sometimes causes problems like this)
    Then we went to the side window, where it says Airport, Bluetooth, Ethernet, Firewire.
    At the bottom of that he had me press the button with the Gear.
    Then I went to Set Service Order
    Airport was at the bottom.
    I dragged it to the top.
    I tested Safari, and that worked
    Then I restarted Itunes, and it worked.
    Hopefully this helps,
    Let me know...
    Sincerely,
    Ferd

  • TS3297 Error message: 'Cant connect to the itunes store. An unknown error occured (-3212) please check you have an active internet connection and try again'. Help !

    Can someone help me please ? I was using itunes (downloading albums etc) just half an hour ago. I had a pop up asking me if i'd like to download the latest version of itunes, which i accepted. When the update had finshed downloading, i then restarted my computer, as i usually would. Tried to re access the itunes store, and received the following error message: 'Cant connect to the itunes store. An unknown error occurred (-3212) please check you have an active internet connection and try again.
    Needless to say, i have an active internet connection and cant see any reason why this would be happening, it has never happened before ?
    Any help would be appreciated.

    Do you have PeerBlock installed/    >  TS3297 Error message: 'Cant connect to the itunes store.

  • Sloooow internet - Active Internet Connections??

    Hi Everyone, this is my first time posting anything on here so please be gentle
    My internet runs very slow. This is an intermittent problem. Right now, for example, I can browse the net without much hassle. At other times, I try to check hotmail, for example, and it simply times out after several minutes.
    My internet provider did several checks and came to the conclusion that there is nothing wrong with the line and the bandwidth I'm getting.
    They then asked me to go to the NETWORK UTILITY, choose NETWORK INTERFACE (en1) under INFO and then choose DISPLAY THE STATE OF ALL CURRENT SOCKET CONNECTIONS under NETSTAT. I ran this and it came up with 27 active internet connections. I have no idea what these all are. There are also many more active LOCAL (UNIX) domain sockets.
    The guy on the phone told me there should only be around 10 of these active connections and that more than 10 suggest a virus or spyware. I ran some virus software and it found 0 viruses. I just spoke with Apple Support and they told me that this information was incorrect and that it only applies to a PC and that a MAC cannot get a Virus or Spyware. Their suggestion was that I TURN OFF my firewall and see if it helps with internet speed. This seems like bad advice to me.
    I'm now completely stuck as to where to go from here. If anyone out there has any idea I would be extremely appreciative of some help!
    thank you in advance,
    Dylan31

    Hi Dylan and welcome to the forums!
    Who is your ISP? Their comment is wrong, and Apple are correct.
    Try this:
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
    Adding DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    (An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari

  • How to check for active internet connection in iOS device

    Hello All,
    Recently I've come to  know that there are some API's provided by Flex 4.6 in Flash Builder 4.6 which are not supported in iOS based devices like iPhone and iPad.
    You can check the list here - http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b24b55b57a124b32b5b57-7fff.html
    Now I'm helpless because in my cross-platform app, I need consinuously active internet connection and if it is not available, I want to show errors.
    Can any one help me about this.
    Thanks for reading

    Hi,
    we can check indexs uisng T codes SE11 and DB02
    Useful to run the ABAP reports SAP_UPDATE_DBDIFF and SAP_INFOCUBE_INDEXES_REPAIR.
    relevent links:
    http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6473e07211d2acb80000e829fbfe/content.htm
    Re: Checking Indexes using SE11 and DB02
    Regards,
    BBC
    Edited by: BBC Achari on Jul 4, 2010 6:23 PM
    Edited by: BBC Achari on Jul 4, 2010 6:25 PM

  • When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again"

    When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again".  This happens with two different apps from two different banks.  One of them works occasionally and have not figured out why.  I have cell signal and I am on a strong WiFi network.  Same thing happens when I turn off the WiFi too.    I have tried uninstalling and re-installing the app with no improvement.   I can't seem to find any setting that would cause this.   Does anyone have any suggestions?  

    I can access the internet just fine in the browser and i can use any other app i have.
    Sent from my Verizon Wireless 4G LTE DROID

  • Why does Home Sharing require an active internet connection?

    I have noticed when my internet goes down I have real difficulty streaming content to my Apple TV from my iMac. I can see it but I get stuck on the spinning clock. Some audio works OK but video not. This makes no sense. I shouldn't need any internet to access content on a local device.
    It seems to be by design, per Troubleshooting Home Sharing (n.4) "Home Sharing requires a home network with an active Internet connection."
    But why can I play music but not TV shows? And why is there not an error message instead of spin? In any case why require it at all? I reset the home wireless, and the modem. My ISP confirmed there was cable trouble at that time. When the internet went back up, home sharing worked.

    Thanks for the many many replies, Apple User Community. Apple seems to have removed this requirement with the latest software update (7.0.1) for the Apple TV .

  • Unable to update devices, receiving error 3014 on iTunes, and device via wifi is stating "Not connected to the internet", when it has an active internet connection

    Hi,
    I have been encountering this issue and I have run out of ideas as to what would be causing this error. On numerous apple devices for our business I will receive an error 3014 when updating a device via iTunes, and this is after the software update downloads. When attempting to update the device over wifi it states that the device is not connected to the internet, when I ensured that the device has active internet connectivity.
    Our business uses a Juniper firewall, which I thought might have been the initial cause of the issue, however I have ensured that ports 80 and 443 have full traffic flow and nothing blocking it, and I've also exempted all *.apple.com websites that I could find listed online.
    I have also tried deleting the host files on the computer I am using to circumvent the issue.
    If anyone could shed some light on what I can do to resolve this, that would be appreciated.

    Hi evanVIT, 
    Welcome to the Apple Support Communities!
    I understand that issues like the one you are experiencing can be very frustrating. For this situation however, for update errors in the range of 3000-3020, I would recommend the troubleshooting steps located in the attached article. Please use the steps and information as a reference. 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Cheers, 
    Joe

  • Can somebody explain to me how I can detect that an internet connection exists (VB)?

    Can somebody explain to me how I can detect that an internet connection exists (VB)?
    Peter Goossens

    There is no reliable way. Better test whether you can go to where you want to go. And be prepared to support proxies, even the complex ones that require authentication. 
    System.Net.NetworkInformation.NetworkInterface.GetIsNetworkAvailable reports your local connectivity regardless of whether one of your connected networks has Internet access.
    Microsoft's Network Awareness API (the one used in control panel\network and sharing center) use a connection test to a web site setup by Microsoft. But your customers could be behind cooperative firewalls that make this test unusable even when Internet
    access is available though other means (e.g. via a local proxy server). If you want to connect to your own web site, then you can skip that and just connect to your web site instead. Even if you were able to connect to Microsoft's web site there is no guarantee
    your web site would be accessible in the same network.
    Visual C++ MVP

  • Iphone 5. cannot get mail. no internet connection available.

    I have the iphone 5. My carrier is Sprint. I can get email only when connected to wi-fi. When no wi-fi is available I get a pop up message that says: cannot get mail. no internet connection available.
    I am sure I am just missing a setting or something to correct this. Any ideas?
    Thank you!

    I experienced this problem firsthand with a Sprint iPhone 5 about a month ago, telling me it had no internet connection and could not check my email (which was Gmail, set up through the native Mail app, using default settings). I can confirm that restarting the phone (holding home + power buttons until restart) temporarily fixed the problem but it quickly returned. Toggling Airplane mode did nothing. The problem did return within the same day after a period of time. I have since switched back to AT&T.
    Interstingly, my sister had the same issue with her brand new Sprint iPhone 5 this week. She called Sprint and the customer service representative confirmed that this is a problem that only affects Sprint iPhone 5 users who use Gmail. The rep told her that it affects Gmail both in the native Mail app and also in the Gmail app, but web use still works (I haven't confirmed this). The rep also said that Sprint is aware of the problem and working on a fix that would be delivered in the form of a "software update" but there was no clarification if that was an iOS update or a Sprint carrier update.
    That's all the info I have now, but if you're a Sprint iPhone user and experiencing this problem, please do call Sprint and let us know what you find out.

  • Do I have to have an active internet connection while using Audition

    Do I have to have an active internet connection while using Audition?  Sometimes I will want to take it on my laptop to places where I will be unable to get an internet connection.  Will the program still work in such cases?

    As long as you aren't using the Cloud for audio file storage, yes it will. I believe that it may occasionally need to "phone home" to check your credentials if you are using a CC version but only about once a month. It should warn you though I think but providing you have been using it at home in the days before you are away from the internet it should be OK.

  • My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    My ipad says it has an internet connection but when i try to access safari it says it is unable to as there is no internet connection, help!

    Tap Settings / General / Reset / Reset Network Settings.
    Restart your IPad. Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If that doesn't help, try here >   Apple - Support - iPad - Wi-Fi

  • E90 Maps w/o active internet connection

    With *Maps* installed on an E90, it seems impossible to find a location or to plan a route without an active internet connection.
    Is there a method to use Maps without active internet connection (like Route66 on my notebook)?
    Thanks!
    Andreas

    Hi kaon,
    I checked the E90 manual online .. was curious ..
    Found out that it can be done !
    Page 54:
    To prevent the device from automatically downloading maps through the internet, for example, when you are outside your
    home cellular network, select Options > Settings > Network > Use network > Off.
    28-Jul-200711:39 PM
    kaon wrote:
    And even if there is Internet connection via wifi and telco's data service, Maps doesn't seem to see it.
    For the N95, if you select to set the Network to 'when need', then the phone will give you a chance to select the access point. Try selecting the right one -- WLAN/ Telco.
    Let me know how it goes !
    28-Jul-200711:39 PM
    kaon wrote:
    And is there a way to tell maps to never show the zooom-in start up animation?
    Hmm.. dont know..
    Cheers
    Let me be a ripple in the silent stream of your memory ~ Viveca

  • Says i don't have active internet connection and i do

    I can't access the itunes store.  Says I do not have an active internet connection and I do. All three of my computers are saying the same thing.  What do I need to do?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I cannot play videos because I have a "Proxy Detected..Your internet connection is currently using an HTTP proxy, content playback is not supported when a proxy is configured." How do I get rid of this "proxy"?

    I cannot play videos because when I try to do so the following message occurs:
              "Proxy Detected...Your internet connection is currently using an HTTP proxy, content playback is not supported when a proxy is configured." How do I get rid of this "Proxy"?

    This helped me
    http://mashtips.com/amazon-instant-video-http-proxy-error-on-ipad/

Maybe you are looking for

  • Oracle Tree Hierarchy Query

    Hi, Hoping someone can assist with this query: I am currently using this query to construct a tree hierarchy, i.e. SELECT "EMP"."MGR" as "MGR",         "EMP"."EMPNO" as "EMPNO",         "EMP"."ENAME" as "ENAME" ,         (select count(*)  from "EMP"

  • The XPRA for converting the event linkage (RSWFEVTXPRA)

    Hi We have just completed a couple of upgrades from 46C to ERP2005 ECC6 and we have discovered a problem with the workflow in that some of the event linkages are lost during the upgarde. We have found the following SAP notes 1082490, 1019080 and have

  • MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?

    MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?  (obviously not talking about BTO, but about "self-service" upgrade ...)

  • LR5 Crashes with selecting "preview" or "play" in Slideshow tab.

    I own the latest version of LR5 and am running it on a 1st gen Mac Book Pro Retina with OSX 10.9 also with a secondary monitor running off of HDMI.  I've never used this feature until now and trying to test it out. Any clues on why it wouldn't be wor

  • Multiple proxy servers and session replication

              Hi,           I'm in the middle of testing the 5.1sp10 that I set up recently.           Say I have PROXY1 and PROXY2, connecting to the object layer.           First, I point my browser to https://PROXY1/application. I did some stuff there