WRT54GS - Have to be Reset every 30minutes.

I have the WORST problem with my wireless router....... Was the worst mistake Ive ever made..... Why do you guys make routers that have to be reset every thirty minutes??? So wish I could get my money back.
I'm not the only one having these problems. I know 3 people off hand. If your going to make a product. Make one that actually works.
it says 2.4ghz with speed booster. model wrt54gs
I did a internet speed check by plugging straight up to the computer and have amazing speed. Once I hook up the wireless router it barely works. Even sitting right beside it. If you could help that would be awesome. Thxx

You can try to Hard Reset the router once which will clear out the NVRAM and set Router back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds....
After following process reconfigure the router according to the ISP setup:
FOR DSL connection: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
FOR CABLE connection:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...

Similar Messages

WRT54G Have to Reset ABOUT every two weeks

Hi, My WRT54G works fine but about every two weeks I have to reset it (unplug the power cord wait 30 sec. and plug it back in) to get it to connect to the internet or get emails. I believe it is Ver. 8.2
Any ideas why, other then that its works fine, I don't want to mess it up, I'm not great with computers.
THANKS

Try upgrading the firmware on the router.
You can find some info here.
After upgrading the firmware, Reset the router. Press the reset button on the router for 30 seconds. The Power light will start flashing. Turn the Router and the Modem OFF. Turn the modem ON first, wait for 10 seconds, turn the router ON, wait for 10 seconds, you should be ONLINE with a reliable connection !!!
C | EH
linksyshelp.blogspot.com

WRT54GS Resets Every 5 Seconds?

So after a year of solid useage, my WRT54GS has encountered a serious problem. The router seems to reset every 8 seconds. The process looks as follows.
The Power button flashes and Internet button stays solid for the entire process
After 5 seconds, the WLAN comes on for 1 second
Then the Cisco Systems light comes on Amber for 1 second
Then Ethernet lights 1-4 flash for another second
The process repeats indefinitely.
I can't seem to upload new firmware b I can't seem to upload new firmware ecause it is constantly resetting. Oh, and it resets regardless of whether or not I have it connected to the internet.
Any ideas on what can be done here?

Try this procedure to reset the router to factory defaults, and see if this will give you a stable router.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Every time I try to buy a song, a message pops up stating "Your Apple ID has been disabled. I have changed and reset everything. How can I fix it?

Every time I try to buy a song, a message pops up stating "Your Apple ID has been disabled." That's it. Nothing else. I have changed and reset my email, password, security questions, and billing info. The message still pops up. I am just trying to buy some music. Any ideas?

Contact iTunes by:
Contact iTunes

How do I have a totalizer reset at the end of every month?

We are using Lookout 5.1 in an application that is receiving a Modbus input giving us a totalizer value. We need to have this value reset to zero at the end of every month. Also want the monthly total to be sent to an excell spread sheet. All help is much appreciated.

I think this NI Post will help you out....
Regards

HT201412 I have an iPod touch 4th generation and after sending emoji iMessage is not working, it closes every time I try to open it and I have already tried resetting my iPod and restarting it.

I have an iPod touch 4th generation and after sending emoji it no longer works. Every time I try to open iMessage it closes. I have already tried resetting and restarting my iPod and neither has worked.

Have you tried getting rid of emoji?

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Want robust solution for alternating row color, resetting every group

I would like a solution for displaying an alternating row color for my detail rows that resets every group, so that row 1 is always gray.
Our Crystal designer provided this code to me:
@rowcnt formula, suppressed, placed in Detail row:
Shared numbervar rowcnt;
rowcnt := rowcnt + 1;
@resetrowcnt, suppressed, placed in Group row:
Shared numbervar rowcnt;
rowcnt := 0;
Formatting formula, placed in Color in Detail > Section Expert:
Shared numbervar rowcnt;
if Remainder(rowcnt, 2) <> 0 then
color(241,241,241)
else
crWhite
This was working fine for me.
However, it is suddenly not working in one of my reports.
The report does happen to have two groups (rowcount.png).
When the report is run, all rows are colored (rowcount02.png).
This report was previously working fine! I'm not sure what changed.
In any case... surely there must be standard code to do this very standard formatting.
I would be very grateful if someone could post some robust code to accomplish the following:
REPORT DATA IN DETAIL ROW, ALTERNATE ROW BANDING:
- Data in Detail row displays alternating row colors
- Odd rows are always shaded, even rows not
- Banding resets every group / does not continue pattern from previous group
REPORT DATA IN GROUP ROW, ALTERNATE ROW BANDING:
Some of our reports place row data in a group row (just the way it happened).
If you could also modify your code in this case.
Thank you!

Hi Abhilash/Sastry, since I'm going to switch to Sastry's formulas, could you please confirm correctness of the following. I can't actually run this report, I can only provide it to our London office, bit of a lag for testing.
@resetrowcnt:
Whileprintingrecords;
Numbervar cnt:=0;
@rowcnt:
Whileprintingrecords;
if {HedgeDetails.StrategyID} <> previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID} <> previous({HedgeDetails.DealID}) then
Numbervar cnt:=cnt+1;
Details section (Suppress):
not(OnFirstRecord) and
{HedgeDetails.StrategyID}=previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID}=previous({HedgeDetails.DealID})
Please note: Suppress checkbox is selected AND the above formula is entered.
Details section (Color):
Whileprintingrecords;
Numbervar cnt;
if cnt mod 2 <> 0 Then color(241,241,241) else crwhite

I use the Icalendar at home, at work, and on my Iphone. I don't want to have to "sign in" every time I need my calendar. How do I stay signed in? I have checked the "keep signed in" box, but it does not work.

I use the Icalendar at home, at work, and on my Iphone. I don't want to have to "sign in" every time I need my calendar. How do I stay signed in? I have checked the "keep signed in" box, but it does not work.

Welcome to the Apple community.
Staying signed in at iCloud.com is not a problem for me. Try resetting your browser or emptying its cache.

IPod won't appear in iTunes or Desktop until I reset every time

Hi All. Sorry if this has been covered. I read the article on this (http://docs.info.apple.com/article.html?artnum=60950), but it didn't help.
My problem:
I have the 30gb 5th-gen iPod and an Intel 1.83 Mac mini (10.4.8). Recently, every time I plug in the iPod, the computer refuses to mount it. The iPod screen displays the "Do not disconnect" message, but the computer and iTunes don't see it. If I perform a soft reset (middle button + Menu) the computer will then recognize the iPod, but I have to do this every time!
I looked at and tried the suggestions in the Apple support document listed above, but none of them resolve the issue. Any thoughts?
Thanks,
Kevin

I have a similar problem well its more serious though -- I accidentally unplugged my 80 GB video iPod prematurely from my Intel based Mac Mini without ejecting it in iTunes and now the iPod is stuck on the Do Not Disconnect screen even after it was unplugged -- plugging it back in does not help any.
I have tried restarting my Mac Mini with it plugged in does not help at all -- tried pressing the hold switch back and forth on my iPod a 5th generation video version nothing -- iPod does not appear on my Mac Desktop, any Finder windows nor does it appear in Disk Utility or iTunes.

My phone went blank and now will only show the apple logo I have tried to reset it and that doesnt work HELP!!!!

My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....

Try to set it up as new device, explained here:
How to back up your data and set up as a new device
First without using the backup, in case it contains corrupt data.
If it works after that, use the backup to restore from.

Wireless accesspoint needs to be reset every morning

We do have 2 airport extreme stations that needs to be reset every morning before users can connect to it.
We connected the airports to a UPS to see if the problem disappeared but it is still there.
One of the lights of the airport extreme is off (left)
by resetting the airport everything is back to normal.
the airports do have the latest software installed.
I do know there is a lot of interfearence in the building.
Could this be the cause or is it something else.

I think I am having the same problem. Every morning and sometimes in the middle of the day when I leave my ocmputer for a few hours I have to restart my DSL modem and my airport as well as a router i have for my VONAGE phone. Everything is working correctly and connected correctly as well. It works fine but when i leave the computer for some time I lose my internet connection. I disconnected my airport entirely and just plugged the DSL directly into my computer and there was no problem so it is for sure some conflict with my airport extreme. I have the main base station which is the Airport Extreme and a express for my stereo and then another express in the back of the house extending the range.
It was all working perfectly when i first set it up but now this just started. i have been on the phone with vonage and with SBC for the dsl and the problem is not with their hardware. I tried calling Apple but they wanted $$ to even talk to me over the phone which I thought was pretty lame.
Can anyone offer suggestions that might help me?
thanks

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

HT201303 The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Is anyone AppleTV continues to reset every 10 seconds, if so how can this be fixed?

My Apple TV continues to reset every 10 secconds - stating it is not connected to the network. I have excellent wireless internet connection in my home. Nothing else in the house is intermitten just the AppleTV. Can anyone tell if I can fix this challenge? This is my prefered way to watch TV. I rarely use my cable service.

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

WRT54GS - Have to be Reset every 30minutes.

Similar Messages

Maybe you are looking for