WRT54GS Is blocking INCOMING mails on outlook

Hello, I have a WRT54GS v1.1 for arround 8 years. It works perfect. Now since 2 weeks to today does not let income new emails. I turn off firewall, upgrade firmware, I test with plug direct to modem and works fine. The issue here is the router.
HELP ME WITH THIS

If you don't want to mention the real domain name, use example.com, example.net, example.org instead. Don't simply use domain names of other people like the one you have used.
What happens exactly?
What is the exact error message?
What security software is running on your computer?
Can you ping the mail server?
Can you open the port with telnet, i.e. you enter "telnet mail.example.com 110" and see if you get connected or not. If not, what is the exact error message?

Similar Messages

Block incoming mail (spam) overnight?

G5 Mac OS X (10.4.6)
I've noticed that 95% of my spam is delivered to me between 12 am and 8 am. Since friends and collegues rarely send me email during those hours, I was wondering if there is a way to disable Mail during those hours and thereby block the emails from ever making it to my inbox.
I've looked through rules and tried unchecking the "enable this account" box in Preferences but have not found anything that works. Any ideas?
Best,
Lea

Securegroup,
jloehler is absolutely correct, when I configure appliances (personally I use a 1 listener config) I set the Default Mailflow Policy to Use the Exception Table ("On") and insure that all incoming mail policies (anything with the ACCEPT action) is set to "Use Default" for this parameter. Then I double check to insure that the RELAY policy is set to "Off" because you don't want to reject outbound messages due to the Exception Table.
Once I've verified that the RELAY is off and Inbound policies are "On" I then populate my exception table with all the internal domains and specify the reject action. Now a quick take away is that the Exception Table only performs the rejection based on the SMTP MAIL FROM not the "From:" header internal to the message itself.
Now with all that said it never fails that there is some internal group that uses 3rd party marketing which spoofs the internal domains so I usually create a new incoming mail flow policy with the Exception Table turned "Off" and create a Sender Group call DOMAINSPOOFLIST which are IPs and Domain names that I allow to spoof internal e-mail addresses with the new mail policy assigned to it.
And that's it.
Sincerely,
Jay Bivens
IronPort Systems

OSX Lion Mail Server Junk Mail Filter blocks incoming mail from any Yahoo address

I have yet to be able to use OSX Lion Mail Server's Junk Mail Filter. I have several contacts who use (free) Yahoo Mail addresses. Whenever I turn on Junk Mail Filter, even at the Most Cautious setting, any incoming mail from Yahoo.com addresses do not make it into my inbox. I was told last year by an Apple Enterprise Tech Support contact that "..we're still having problems with that Junk Mail Filter, sorry, just leave it off for now.." WTH In the meantime, the good news is I'm not missing any incoming e-mails; but, I'm having to sort through and delete a few hundred spam messages each day.
Suggestions? Thanks in advance

I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

How to block incoming mail with internal domain as sender

Hi all,
Ironport accept incoming mail to internal domains defined in the RAT without verify the sender domain is the same internal domain.
To avoid this I have used a message filter to drop those mails. I can't use the bounce command to avoid to be considered a spammer.
Is there a way to reject those mails with a 5xx error message?
Thanks in advance.
Regards,
Andrea

Securegroup,
jloehler is absolutely correct, when I configure appliances (personally I use a 1 listener config) I set the Default Mailflow Policy to Use the Exception Table ("On") and insure that all incoming mail policies (anything with the ACCEPT action) is set to "Use Default" for this parameter. Then I double check to insure that the RELAY policy is set to "Off" because you don't want to reject outbound messages due to the Exception Table.
Once I've verified that the RELAY is off and Inbound policies are "On" I then populate my exception table with all the internal domains and specify the reject action. Now a quick take away is that the Exception Table only performs the rejection based on the SMTP MAIL FROM not the "From:" header internal to the message itself.
Now with all that said it never fails that there is some internal group that uses 3rd party marketing which spoofs the internal domains so I usually create a new incoming mail flow policy with the Exception Table turned "Off" and create a Sender Group call DOMAINSPOOFLIST which are IPs and Domain names that I allow to spoof internal e-mail addresses with the new mail policy assigned to it.
And that's it.
Sincerely,
Jay Bivens
IronPort Systems

Issues with incoming mail via Outlook

Hello,
I have setup several email accounts using Business Catalyst. Ican access all of them through Webmail. and most of them via Outlook.
one account hower shows issues via Outlook:
* I can access it via Webmail.
* I can send emails from Outlook
* But I cannot receive emails on Outlook.
Again, I can have the emails from other BC accounts, but not on this one. my incoming server port is 110, outgoing is 8025.
did someone face this issue once?

Thanks Sydney.
For your record, or for future treatment, the email address that had issues was [email protected]; while simultaneously, on the exact same computer and outlook software, the address [email protected] was working properly and as expected.
If you face similar type of issues, and remember my case (J), please do not hesitate to keep me posted: I hate not knowing what happened, question of trust.
Thanks,
Philippe

Blocking Incoming mail

How do I block someone from sending mail to me? I called them and asked them to stop sending me mail but they keep sending their stupid messages.

Welcome to the discussions, Jack.
You can't stop them sending. You could see if your mail service provider offers a blocking facility, otherwise you will need to deal with it in Mail.
You can set up a rule (Mail/Preferences/Rules) with the condition "from contains" and the email address of badguy, and the action "move message to mailbox" and the selected mailbox trash. It would be a good idea to test it first - instead of the move action, have a "set background color" action, so you will quickly see if it is finding badguy messages.
AK

How to unblock all incoming mail in Safari

Hello fellow Mac friends;
I'm looking for a way to UNBLOCK ALL incoming mail in Safari...
I did blocked a few by mistake and I wish to Unblock all...
Any way to disable or/edit the complete list…?
I have no parentally blocked sites in the “Parents Controls”, since I have no kids and I'm the only user in this computer...
I've been looking for a week, how to I edit the list of Blocked incoming mail addresses without success...

Hi Neville;
Yes is:
http://www.brainlink.com/services/
Thank you I will call them and ask...
(I should have seen this sequence, but I'm falling behind in my "cyber-know-how" this days...
too much time playing my guitar and not reading all the Mac Computer Mags, I've used to subscribe,during the 80's...)
be well and thanks much for the help...
alex

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Block and Unblock the .zip and .rar files based on doamin or user account base on incoming mails with ironport email security.

Hi All,
Request you all to help me out in blocking/dropping only the attachments with the extension .rar and .zip in incoming mails for particular users or domains.
as of now I have did for all the domains or users.However, I want to unblock it only for some particular/specific users and for rest it should block.
kindly help me with the steps to do the configuration.
Thanks a ton in advance
Regards,
LRN

It sounds like you just need to use different incoming mail policies per group of individuals you want to block/drop .rar and .zip and those which you don't want this to happen.
The fact that you want a specific group to be allowed receipt of these and everyone else should have these blocked I would recommend creating an additional incoming mail policy that does NOT have a content filter that performs this blocking. Add the appropriate users to this incoming mail policy. Then create a incoming content filter that does this dropping of .rar and .zip files and apply this to the Default Incoming Mail Policy.
The content filter in this situation would not need a condition, just a action of strip attachments by file info , filename contains .rar or .zip
Here is a useful regex for the content filter action: (?i)\.(zip|rar)
Hope this helps!
Steve

Can Mail block all incoming mail from a particular domain?

Can Mail be configured to block all incoming mail from a particular domain? I'd rather it be sent to the bit bucket than sent to a spam folder.

Yes, go in to your rules and set it up for a folder of your choosing. Click on the mail menu item then select preferences and then click on rules.

RV042 Hardware V 1.2 Firewall is blocking some incoming mail

Firmware Version: 1.3.12.19-tm
I'm having an issue where our RV042 router is blocking some of our customers from sending us
e-mails.I noticed thatCISCO has produced a newer version of the RVO42 V3.0 and has firmware version 4.x. Probably a stupid question but canyou upgrade the Linksys RV042 Hardware V 1.2 to the 4.x firmware? I have found a few articles and forums online about otherpeople having the same issue with the RV042 v1 randomly blocking
e-mail but no one ever has a solution to correct the issue.Some people have recommend to roll back to factory default and reconfigure
the router as the config may by corrupt. I'm notopposed to doing this but I'm just curios if this has ever worked for anyone?
Thanks,
Lo

Jasbryan,
Thanks for the reply, as far as I can tell the Protect Link services are disabled. When clicking on the Protect Link tab I am prompted with three options
1. I want to buy Trend Micro ProtectLink Gateway
2. I have purchased ProtectLink Gateway and want to register it
3. I have my Activation Code (AC) and want to activate ProtectLink Gateway
Please let me know if i'm looking in the wrong location. The reason why I think the firewall is to blame is I can find entries in the log file below. My company has two ISP, one Cable one DSL. The cable is connected to Wan1 and the DSL is connected to Wan 2. THE RV042 is the first device on our network.
Does the ixp0 refer to the lan connection? ixp1 to wan1? ixp2 to wan2? One of our clients that can't e-mail us allowed me to setup a test e-mail account with outlook express with one of their e-mails. I can e-mail my personal yahoo account but I cannot e-mail my work email.
This is the Policy violation I see when trying to e-mail my work e-mail from my customers test account
Dec 4 21:47:20 2011 Connection Refused - Policy violation TCP 10.10.XX.XX:4632->67.210.XX.XX:110 on ixp0
This is another violation that shows up and I have port forwarding enabled on port 25.
Dec 4 22:50:58 2011Connection Refused - Policy violation TCP 125.163.XX.XX:26566->10.10.XX.XX:25 on ixp1
Thanks,
Lo

Specific incoming mail types block for further incoming mails??

Since upgrading my 3GS to iOS4, I have experienced a new strange phenomenon within mail-reception:
Now and then I am receiving a mail, which places itself at the bottom of the incoming mail list. Such mails are always WITHOUT any sender/WITHOUT any contents, and ALL of them dated 1.1.1970! I can't wipe them out, neither can I delete them/move them. The effect is further that upon reception of such mail types, any further reception of mails is BLOCKED - I only hear the sound when new mails are coming in, don't SEE them in the top of the list. The only immediate way of eliminating the problem is to make a COLD reboot of the phone - then the odd mail(s) at the bottom of the incoming mail list disappear(s), and new mails are coming freely in without obstructions. A new restore of the system appears to be without effect.
I would be grateful for any hints which might eliminate the problem, thanks!

CUCM takes decisions on called number, not calling. one all time favorite question a quick search on NetPro would have provided you the answer
Call Blocking Configuration Examples
http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con11
Reject Calls
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#reject
In case you ask, only h323 can do this.
MGCP can NOT do this
in case you want to block an outgoing call from the fax to a particular number create a route pattern with the exact number and block the call.
HTH
javalenc
if this helps, please rate

How can I read my incoming emails in one folder?Like I do in Live mail and Outlook express.

Now we can only read emails in different folders if I am managing multiple email accounts.
It does not feel so comfortable as we use Live mail and Outlook express.

'''Unified Inbox for pop and Imap mail accounts:'''
If you use the Unified folder view, this will show an Inbox with all emails from all accounts, with sub folder Inboxes for the individual Inboxes for the various accounts. Then you can choose to view the collective Inbox or the individual Inbox.
This method can be chosen simply and quickly.
* View > folders > Unified
'''Setting up Pop mail accounts to use Global Inbox.'''
Pop mail accounts can be set up to use a Global Inbox in Local Folders.
Imap mail accounts cannot be set up to use Global Inbox, but can use the Unified view.
To change Pop mail accounts to use Global Inbox, you would need to move all emails into Local Folders Inbox.
Then change the settings for each pop mail account.
Tools > Account Settings > Server Settings for the pop mail account
click on 'Advanced' button
select 'Inbox for a different account' and 'Global Inbox (Local Folders)
click on OK
You need to do this for each Pop mail account.
Then close Thunderbird. You must do this before downloading anything otherwise the emails may continue to go to the wrong Inbox.
Wait a few moments for Thunderbird to fully close and then restart Thunderbird.
Please read more info on global inbox here:
* http://kb.mozillazine.org/Global_Inbox

Outlook icon on ipod shows incoming mail, but screen is blank.

My ipad announces incoming mail, and even previews it on my ipad desktop.but when I hit the icon, the screen is blank except for the tool bar, and then it automatically returns to the desktop. The only way I can read my email is if I go on webmail through the internet. I don't want to delete my email account and add it back as it says I will lose my contacts on my ipad. Any suggestions?

Guys!!! You won't belive this... but finally I found a solution!!!
Mail App refuses to download new incoming mail because there is some mail having trouble with the App like Spam and Drafts Mails.
My solution was erase all the mails in the spam box location and the one in Drafts box location. Then resync and That's it!.
I've been googling by like 2 days and didn't found a thing. All the credit is for Outook who was able to download all Mail that Mail App Couldn't.
Cheers!!

IN TRYING TO BLOCK JUNK MAIL USING mail, preference etc I HAVE MANAGED TO RECIEVE MAILS OKAY BUT BLOCKED ALL MY INCOMING MAILS APPEARING IN INBOX - HELP!!

AS ABOVE MY PROB IS I HAVE MANAGED TO STOP MY INCOMING MAILS FROM APPEARING BUT OUTGOING IS WORKING FINE. WOULD APPRECIATE SOME ADVICE. THANKS

Sabine,
What you report would be fully consistent with accessing your .mac account with a computer or mail client where the .mac account is setup as POP account.
With a .mac or IMAP account, if you happen to access the account from a computer or mail client that defaults to treat the account as POP, then often the further default is to download the messages, and further instruct the server to remove them. In other words, the IMAP or .mac account gets treated as a POP, and the messages are removed following download. It would make no difference how you had the setting on your primary computer, or primary mail client (Mail) -- the settings for server behavior are in each mail client, whether aboard more than one computer or not -- and would also be true of POP account selection of actions following initial download.
Remember, a .mac account acts like an IMAP account, and Inbox, is on the server, but the server will respond to being approached as though it is POP. The Dell would not have had an option to set the account type as .mac, so the proper choice would have been IMAP.
See:
http://docs.info.apple.com/article.html?artnum=52339
More info, please.
Ernie

WRT54GS Is blocking INCOMING mails on outlook

Similar Messages

Maybe you are looking for