WRT54GS losing Internet link

Hello,
I got a linksys wireless network since a few years now and never got ay issue with it. On Saturday though, I started loosing my Internet Connection. By releasing the DHCP and renewing it, I can get Internet back for 20-30 minutes or so. 
Here's what I tried so far:
- Contacted my ISP, my connection is perfect, no lost packets, anything
- Network works fine, file sharing is slow (as mentionned here) but it works nonetheless
- Upgraded the lastest firmware yesterday morning
- Rebooted the Router
- Hard Rebooted the Router
- Reset many times (more than 1 minute to release static)
- Changed the channel
Nothing worked. The Internet light is flashing like crazy on the router, like it was spamming or something.
Any ideas?
Thanks!

It sounds like your modem and the wireless router both are loosing communication with each other...
Kindly state your ISP...
Kindly state the model number of your modem(not the wrt54gs)...
Kindly state the IP Address information when connected to the modem and when connected to the router...

Similar Messages

  • My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Losing internet connection every hour

    Hi Guys
    I replaced my Linksys router with an Airport Extreme 4th Gen about 2 weeks ago
    I keep on losing Internet Connection when connected through a Wireless connection. This happens with my Windows 7 PC's, with my iPhone4 and with my iPad2. The connection with the AE is kept alive but the passthrough to the Internet does not work anymore. I have to reset my wireless adapter to reconnect and rebuild my internet connection.
    Fyi,
    My IPCONFIG result:
       Verbindingsspec. DNS-achtervoegsel: telenet.be
       Beschrijving. . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200 AGN
       Fysiek adres. . . . . . . . . . . : 00-27-10-48-22-38
       DHCP ingeschakeld . . . . . . . . : ja
       Autom. configuratie ingeschakeld  : ja
       Link-local IPv6-adres . . . . . . : fe80::34a4:c702:47d:8663%1 3(voorkeur)
       IPv4-adres. . . . . . . . . . . . : 192.168.0.109 (voorkeur)
       Subnetmasker. . . . . . . . . . . : 255.255.255.0
       Lease verkregen . . . . . . . . . : woensdag 3 augustus 2011 20:20:02
       Lease verlopen. . . . . . . . . . : donderdag 4 augustus 2011 21:41:06
       Standaardgateway. . . . . . . . . : 192.168.0.1
       DHCP-server . . . . . . . . . . . : 192.168.0.1
       DHCPv6 IAID . . . . . . . . . . . : 352331536
       DHCPv6-client DUID. . . . . . . . : 00-01-00-01-15-02-48-56-00-24-BE-EB-D2-73
       DNS-servers . . . . . . . . . . . : 192.168.0.1
       NetBIOS via TCPIP . . . . . . . . : enables
    Note that - when losing internet connection - my IPCONFIG result remains the same...
    and the AE log (note the :38 my PC)
    Aug  3 22:38:15    5    Rotated CCMP group key.
    Aug  3 22:38:15    5    Deauthenticating with station 00:27:10:48:22:38 (reserved 2).
    Aug  3 22:38:15    5    Disassociated with station 00:27:10:48:22:38
    Aug  3 22:38:15    5    Associated with station 00:27:10:48:22:38
    Aug  3 22:38:15    5    Installed unicast CCMP key for supplicant 00:27:10:48:22:38
    Aug  3 22:38:16    5    Rotated CCMP group key.
    Aug  3 22:39:18    5    Rotated CCMP group key.
    Aug  3 22:46:05    5    Associated with station 00:27:10:48:22:38
    Aug  3 22:46:05    5    Installed unicast CCMP key for supplicant 00:27:10:48:22:38
    Aug  3 22:46:38    5    Associated with station 00:27:10:48:22:38
    Aug  3 22:46:38    5    Installed unicast CCMP key for supplicant 00:27:10:48:22:38
    Aug  3 22:47:37    5    Connection accepted from [fe80::34a4:c702:47d:8663%bridge0]:51949.
    Aug  3 22:47:38    5    Connection accepted from [fe80::34a4:c702:47d:8663%bridge0]:51950.
    Aug  3 22:47:41    5    Connection accepted from [fe80::34a4:c702:47d:8663%bridge0]:51951.
    I really hope someone can help me out here.
    I do not want to go back to my good old Linksys...

    I have a similar problem with a new TC 2TB unit. I have ATT ADSL service using a Speedstream modem. PPPoE is setup on the TC and it works and connects. All features of the TC are working (wi-fi, Back to My Mac, Time Machine, etc...) and the light is solid green on the TC.
    Periodically, the LED blinks amber and I've lost Internet access. The Speedstream modem shows all green lights. I have found that power cycling the Speedstream modem brings the TC back to solid green after about 2 minutes.
    I am seeing this happen about once a day and it can happen overnight when there is no network activity. I am thinking that the lease on the IP address given by ATT expires and the TC does not know enough to reinitiate a connection. I have set the PPPoE Connection to Always On and experienced the problem. I have also tried setting the Connection to Automatic and set the Disconnect if Idle setting to Never.
    Message was edited by: Dan Peterka

  • Ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox although my mac switches to the firefox window as this is my default browser- what to do? Previously this has always worked without a hitch...

    ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox athough my mac switches to the firefox window as i have this set to be my default browser- what should i do?

    I have the same problem, and I also wondered if Google toolbar has anything to do with it. There GMAIL was set as the default mail application at first. I have removed that setting, but Firefox 4.0.1 continues to use GMAIL instead of Outlook which is my selection for mailto handling.

  • I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me.  Anyone else having the same problem?

    I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me.  Anyone else having the same problem or know how to fix this? 

    The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
    Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
    Still unnecessarily difficult, but not as bad as copy/paste.
    What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

  • Touch screen not working with internet link in safari

    Anyone has the same problem?
    After 1.1.1 update, my touch screen occassionally fails to respond any tap on internet links in safari. no matter which web site you go to, no link will work on tap.
    I tried to clean catch, cookies, etc. The only way to out of it is to reset the phone (both key pressed).
    It happens about once or twice a day, not often enough for Apple people to duplicate it, but enough to bother me.

    I have had the same exact problem occur 3 or 4 times since the update. I fix it by turning the phone off and on again.

  • Losing internet

    I keep losing internet and have to diagnose with network diagnostics repeatedly, but there is no problem with my internet connection, please help!

    Hi seneht,
    I am connected via a wireless router to 1 mac and 2 pc's. I have not had any connectivity problems with the PC's going into and out of sleep mode. While, I have never had to restart my Mac to reconnect after sleep mode, it will OFTEN drop the signal and need to search again. This can be a simple as reloading page or shutting down browser or email apps and then reopening again and this works 100% of the time.
    I have since changed some of my Energy Saver Preferences to get around this. I now set my computer to 'NEVER' sleep but of course allow my display to sleep. This is quite harmless to your Mac and many users prefer this rather than letting computer sleep. In using this option, I have not had any dropped connections, and when I wake the display all is still connected and can pick up where I left off...
    Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • Internet Links Dont Open

    HI,my problem is when i have a internet link in my emails,files or any link,is that when i click on it it starts the web browser but only opens it on the homepage.I have disabled all other apps inc security,but still only opens home page.This is in safari.firefox and camino.But when i open the web broswer first on the homepage then click on a internet link(not on the web broswer)eg email then it goes to the correct page.So unless i open the web broswer first it doesn't go to the internet links correct web page.I checked preff etc,but still no joy.Shouldn't this link on default from new anyway.Please help,anybody with more knowledge on computers(which i dont have)welcomed.THANKS.??????

    Well i can answer my own Q,the answer being my brand new mac pro is faulty had to take it back.It wouldn't download software fully or in the correct places.e.g FIREFOX web broswer.I had to keep trying a different download before it worked,then after a reboot it would start playing up again .On all extra software.Thought by paying more money over £2000.00 you get a **** of a computer,WRONG.

  • I keep losing internet on my imac

    I keep losing internet on my imac.  i have to "restart" or play around in "system preferences/networks" to reconnect.  All iphones, laptops and ipads do not have issues with the wireless connection.

    Alfred Levanen wrote:
    I keep losing my internet connection on my desktop (iMac G5) when we are using our cordless telephone.
    it's called _*wireless interference*_.
    best you can do is to change the channel(s) your wireless router is broadcasting on.
    Can AppleCare help me
    nope.
    JGG

  • How to open internet links from Outlook 2003 using Firefox not IE

    When I open an internet link from Outlook 2003 it always opens with Internet Explorer. I want to open with Firefox.
    == This happened ==
    Every time Firefox opened
    == ?

    Try this - http://www.gamevance.com/deactivate.php

  • RoboHelp 8 How to create a hotspot with a URL/internet link

    Using RoboHelp 8, within the verbage of a topic, how do I create a URL/internet link (EX: www.mysite.com)  that is clickable and will take the user to that web site?

    Highlight the content to be clickable, click Insert > Hyperlink, click on the down arrow next to the "Link To" field and select Web Address. Enter the URL and click OK.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.

  • Find/Change for internet links?

    Is it possible to do a Find/Change for internet links?
    That is, if I have URLs that do not appear in the text of the AppleWorks document, but in the links window, and I want to change all the links beginning with http://us.imdb.com to http://pro.imdb.com
    It seems this is not possible through the Find/Change function under the Edit menu, but perhaps I just don't know the right way. Otherwise, the only way to do it would seem to be to change each one individually in the links window with the edit function.

    Hello
    Alas, the last formula is the right one.
    The URLs are not stored in the body of the document so the Find/Change tool is unable to find them.
    Yvan KOENIG (from FRANCE 17 octobre 2005 21:51:08)

  • Internet links doesn't work anymore within my Outlook

    My internet links within my Outlook doesn't work anymore when I click on the link (I got a system problem). Anyone who knows what settings I need to do?
    Thanks

    That being the case, I think the default setting must be corrupted.  See here on how to reset: http://www.msoutlook.info/question/706
    Or open control panel, go to Default Programs, and then Default settings.  Change the file association for Interner Explorer.  See if that works
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • When I put the arrow on an internet link in an e-mail, a blue "F share" panel appears and stays when the link opens. Click on it, a window opens asking for login. I don't want to share anything on Facebook just to get rid of this intrusive bloody thing?

    Every time I put the cursor arrow over an internet link in an e-mail, the little blue "F share" panel appears. If I open the link the panel stays visible. If I click on it to get rid of it, a window opens asking me to login. I don't want to login; I don't want to share anything on Facebook. How can I get rid of this intrusive bloody thing?

    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Transferring Video Files without Losing Project Links

    I know this issue must have been addressed in the archives, but I can't seem to find the specific issue.  Hope someone can help.  The online manual is no help.
    My C: HDD is filling up with video files, and I'd like to move all video files (and future files) to a new 2TB disk that I have installed dedicated for that purpose.  I intend to leave Premiere Elements 4.0 and my .prel projects in my existinng C: drive.
    How do I do this safely, without losing the links between the raw video files and clips inserted in my project??  Thanks.

    the Archiver seems straightforward, but I will then have my .prel project on a drive different from the Premiere program.  Somewhere I read that this is possibly unstable.  Any opinions?
    Actually, this is preferred. On a two, physical HDD setup, allocation like this is best: Not sure where you saw a rec. to have the Project on the same drive as the program.
    C:\ OS, program files, and maybe the Windows Virtual Memory (Page File)*
    D:\ Project, Assets and Scratch Disks
    If one has a 3 HDD I/O, this would be the best
    C:\ OS, program files, and maybe the Windows Virtual Memory (Page File)
    D:\ Project, and Scratch Disks
    E:\ Assets
    * A bit of experimentation might indicate that the Page File does better on another HDD, as far as ultimate performance is concerned. I have two different Page File locations, on two different machines. On one, splitting the statically managed Page File over C:\ and D:\ yielded the best performance, while on another computer, locating it fully on E:\ was best. Just depends, though locating on C:\ will usually be pretty good. For video-editing, I do like to statically manage the Page File, as is explained in this ARTICLE.
    Good luck,
    Hunt

Maybe you are looking for