Wrt54gs no service name available for pppoe

my isp requires that i put a service name. i had a dlink router that worked fine with my connection, but now i cannot find the service name field in the linksys router for my connection to work.
can anyone help me solve the problem. maybe a firmware is available that adds the service name field.
i have the wrt54gs v5.1 firmware version 1.50.9

I guess the Service Name provided by the ISP has to be type in the Host Name box under Setup Page.

Similar Messages

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support

Can 3G service made available for Blackberry-8520 ?

Dear Friends ,
I bought a Blackberry-8520 before two months, but after buying it I understood that 3G service is not available for this model, now can anybody tell me that a 3G service could be made available for this model? if yes then please explain or send me a link.
Please help
Solved!
Go to Solution.

Nope... it's a hardware need, and it is not and won't be available on the 8520.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TNS Service Name selector for ODBC config on W2k shows trash w/ IC 10g

Hello!
I'm having some problems with the Instant Client 10g on a Windows 2000 Server SP4 machine. On this machine, I'm trying to setup a ODBC connection and fail, as the "TNS Service Name" list only contains "junk". Please see the screenshot at
http://server3.pictiger.com/img/613385/computer-games-and-screenshots/w2k-oracle-odbc-tns-service-name-trash.php
To get so far, I downloaded and unzipped the following files to C:\Oracle\instantclient_10_2:
* instantclient-basic-win32-10.2.0.2-20060508.zip
* instantclient-odbc-win32-10.2.0.2-20060508.zip
* instantclient-sqlplus-win32-10.2.0.2-20060508.zip
Next, I added some System environment variables:
* ORACLE_HOME=C:\Oracle\instantclient_10_2
* TNS_ADMIN=C:\Oracle\instantclient_10_2\network\admin\tnsnames.ora
To PATH, I added (at the end): C:\Oracle\instantclient_10_2. After having done so, I created the file C:\Oracle\instantclient_10_2\network\admin\tnsnames.ora, which contains exactly this (see http://vz6tml.pastebin.ca/211376):
ORABDE.EUROPE.DELPHIAUTO.NET =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.233.30.8)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orabde.delphi)
    )That's the only file with "tnsname" in its name on the local harddrives of this server.
After having done all of this, I ran odbc_install and had the server rebooted later in the night.
This morning, ie. after reboot, I logged on to the system and started the "Data Sources (ODBC)" configuration of Windows 2000. I clicked on "Add" and selected "Oracle in instantclient10-2". Then I expanded the list of the available TNS Service Name entries and see only junk. On a different W2k server, I am able to setup a ODBC connection using the Oracle Instant Client 10g.
What am I doing wrong, and how do I do it correctly?
Thanks a lot,
Alexander

Hi!
I found the error:
TNS_ADMIN=C:\Oracle\instantclient_10_2\network\admin\tnsnames.oraThat's wrong. The environment variable TNS_ADMIN has to point to the directory containing the tnsnames.ora file; it must not contain the complete path to the tnsnames.ora file.
After changing TNS_ADMIN to C:\Oracle\instantclient_10_2\network\admin, all is fine.
Thanks,
Alexander

Is Global Service Exchange available for training purposes?

Hello,
     I am a very well educated teen about to turn 18 soon and am ready to apply to Apple. I have been waiting a long time for this and have studied as much as i could from all the products I could afford (Mainly iOS). My question here is as follows; is there any way i could use Global Service Exchange for personal use only on my own devices? I hear it is what genius reps use and id really like to get some experience with it before i apply. Is there any other software you could recommend for me? (for training).If it is Mac only then it wont do me good as I am stuck with a PC for the time being. I own all 3 popular iOS devices (4 if you like to count the Apple TV) and am familiar with their older generations. I need to learn as much more as i can so please! any suggestions help!.
I thank the community ahead for any answers I receive with other software, however my main concern at the moment is the global service exchange tool.
P.S. I am aware that knowledge of just iOS devices isn't very impressive, just keep in mind that Mac certification training programs are not available in my area. Id love any tips with this issue as well!.

Greetings,
     The answer is no. As far as I know, GSX is exclusively for internal Apple Store and repair facility´s use. If gaining access to GSX is what you want, you might consider first obtaining the Apple Certified Mac Technician Certification. This certification will enable you to obtain a Technician ID, which you will later need to sign into GSX.It will also give you the skills needed to be hired at an Apple Store or an Authorized Apple Repair Provider.
   The app the Geniuses use is propertary of Apple, and used only at its stores. Belive me, I tried to get it on my iPhone. But anyways, Apple offers tons of options to become Apple Certified. Just go http://certifications.apple.com, and register using your Apple ID. I believe you will encounter reading material regarding where to go for certifications.
Hopefully I did not reply too late.
Good luck!

Form service not available for few users

Dear all,
we have nearly 500 users connected to Oracle App server 9i Release " ".
We have a main form called "main.fmx" .
In middle of the day a change my "main.fmx".
As user are connected i cannot replace it.
So what i do is
1) I first rename the "main.fmx" on application server to main_1.fmx" which it allows to do on application server.
2) Copy the modified "main.fmx" directly to application server.
What we observed is all the users which were connected before renaming where able to acceses all the options of "Main.fmx" .
The user which logged in after the file was rename were getting following error :
1) "FRM-92050 : Failed to connect to the server : webdb-01:9001".
Kindly let me know what is the problem.
Thanking you in anticipation.
Regards,
Devendra

the app-server did let you delete the file, because the OAS did need the file.
when you use this trick - then don't ask yourself, why the OAS has a problem after the rename and ...
it's easier to find out, which user are actually using this form and shut down this users. After that you can overwrite the file and no problems will occur.
I have created a technique, in which each form stores the actual form-name in the session-environment. So I can look in the database-sessions which users are connected, and which forms they are working in - actually.
Then you can email them to leave the form and after that you can do the copy
try it
Gerd

Service Manual needed for Qosmio X875-Q7390

Does Toshiba have a service manual available for download or purchase? By service manual I mean a document that shows the internal component and how to dissassemble the laptop. This would be different from the User's Guide, which I already have.
Solved!
Go to Solution.

No.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

PPPoE service name on RV220

Hello,
I want to test with my ISP IPv6.
I run on RV220 a dual-stack configuration. The ISP also request to add on PPPoE profile the Service Name. This field I didn't find on RV220. IS there an option to add it ? Is there a Small Business router that can support this Service Name field ? I know that I can add it on cisco 800 series routers but for small business i didn't find anything

If you are setting up an Internet connection, gather the following information:
Point-to-Point Protocol (PPP) client name that is assigned as your login name
PPP authentication type: Challenge Handshake Authentication Protocol (CHAP) or Password Authentication Protocol (PAP)
PPP password to access your Internet service provider (ISP) account
DNS server IP address and default gateways

WRT54G v5 firmware that contains service name option?

I noticed there are some firmwares out there for WRT54G routers (maybe different versions 3 or 4 , etc) that do indeed have service name option added.
However, when I update my router to the latest firmware it doesnt have service name option.
Is it possible to add the service name option to version 5 WRT54G routers?
thanks

I don't think so that there is some service name provided with firmware version (either 3 or 4 ) on the linksys website .........the software is only a .bin format file ...........
I will suggest you the router or the firmware version didnot require any service name ..........

Error in Creation of Service Name for Bussiness Service

Hi Friends
I am creating customized Service Program for Bussiness Service which is used for uploading spotbilling data to ccb . The service program CM_Sbm_Upload consists of program com ids CIPBSEGP,CIPMMRDP,CIPTSATP . when i give this to bussiness service i am getting error
Service metainfo missing for 'CM_SBM_UPLOAD'
pls help me to resolve this issue.
Thanks&Regards
sivaram

Hi,
I've got the same error during my development of a page maintenance service.
Please check if the cm.jar is correctly deployed in your splservice.ear and check also all other deployment directories.
You can find them in the Output window of eclipse after execution of the "Deploy CM" script.
When the cm.jar is deployed well, check if you annotations are correct.
My annotations are looking like this:
* Perform Batch Add.
* @PageMaintenance (secured = false, service = CMIMDIMP,
*      body = @DataElement (contents = { @DataField (name = CM_SIMULATION)
*                  , @DataField (name = XML_REQUEST)}),
*      actions = { "change"
*            , "read"},
*      modules = { "foundation"})
*/To connect a Page Maintenance Service, you must first create a service programm and the "service name" of the service program must match to
the name of the service annotation that you have specified on your Page Maintenance Service, in my case "CMIMDIMP".
There is no validation during the saving of the service programm, the validation happens when you save the Business Service.
BTW. you can use jd-gui.exe to decompile the cm.jar file but you will not see the annotations !
For viewing the ear file I'm using 7-zip.

"No transaction type is available for creating a transaction" service order

Hi all,
I am new in IC .
I try to create service order or service ticket for incoming calls
We are using CRM 7.0
After I confirm the account I try to create service order
But no screen displayed and error "No transaction type is available for creating a transaction" occurs
in customizing there is a transaction type SRVO, also I copied it to ZRVO
But here how can I define that this transaction type is assigned to this application??
Please reply in detail steps.
Thank you.

Hi Rupesh,
Thanks for your reply..
I made a lot of controls but I can't find where I am wrong..
My senario is, taking phones, create interaction record and create order for further investigation.
I copied IC_AGENT role.
I copied transaction type 0010 to Z010
I create business transaction named ZBTP for transaction type Z010
I made Define Transaction Types for Navigation for Z010
Then Define Business Role -> Assign Function Profiles
Here I assign my business transaction ZBTP to IC_BT function profile
But when I connect tot the system with user having this business role
I can create interaction record with type Z010, it is ok.
When I press Service Order it gives this error.
Work center id for Service order is : IC_UIU_SVO
I copied my business role from IC_AGENT, and here this work center id was not active
In my business role I made it active. Is this work center can't used in IC senario
Also how can I understand which transaction type is needed for it??
If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
But nothing changed..
Please help !!

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

Details for 'Is Web service security available?'

Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
In component monitoring..for the integration engine its in yellow...
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
can any one please help me out..
Thanks
sriram

I have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
In component monitoring
For integration engine
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
In message monitoring
Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
Time Stamp Status Description
2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
2006-05-22 15:18:58 Success Message successfully put into the queue.
2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
2006-05-22 15:18:58 Success The message status set to DLNG.
2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
2006-05-22 15:18:58 Success SOAP: request message entering the adapter
2006-05-22 15:18:58 Success SOAP: call failed
2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
Can any one please help me out.
Thanks
sriram

I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download.

I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download. I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers. I tried with cs2 and I got an error message that some bit of information was incorrect. I currently have both downloaded on two other lap tops I own. One is operational and one is dead. I cannot access the dead one to remove the program. Thank you in advance for any assistance.

For CS2 you will need to download a special new version
CS2 Activation
You might find CS4 download here
Prodesign Tools — Photoshop Direct Download Links

Wrt54gs no service name available for pppoe

Similar Messages

Maybe you are looking for