WRT54GS v.6 Problem -- HELP!

Hello,
I just bought a new WRT54GS v.6 router yesterday, and I just connected it today. I followed all the instructions etc.
When I try to use a browser to connect to the router config(192.168..etc) I get a horribly choppy and undone webpage.
Here's a link to an image of the port foward page I found by clicking "&"
http://img520.imageshack.us/img520/9325/wtfol6.png
There is one page of my problem...its so messed up.
I've gone back to not using a router, since I can't foward my ports to get on games, etc.
...any suggestions?
(Mod Note: Post edited for guideline compliance. Thanks!)Message Edited by Maximus on 05-04-2007 03:22 PM

Are you sure your firewall is really off? If so, then proceed:
If the above post does not work, then reset your router to factory defaults, and then set up the router from scratch. If you saved a configuration file for the router, DO NOT use it.
If it still does not work, your firmware is probably corrupt. Re-download and re-install the firmware. If necessary, use the Linksys tftp.exe program to load the firmware into your router. Then reset the router to factory defaults, and then set up the router from scratch. If you saved a configuration file for the router, DO NOT use it.
Message Edited by toomanydonuts on 05-05-200703:11 AM

Similar Messages

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

IPad syncing problem - HELP!

iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!

Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D.

MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys?? i don't know what to do..

Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
Cheers!
-Bryan

Camera (focus) problem - help?

Duplicate post, please see: Camera (focus) problem - help?
Message was edited by: Admin Moderator

Warranty is valid only in country of original purchase. You have to return
the iPhone to the US for evaluation. Either you return it personally or send
it to a friend/relative/co-worker in the US to take into Apple. Apple will not
accept international shipments for evaluation nor will Apple ship out of the
country after repair/replacement.
Have you tried the standard trouble shooting steps: restart, restore, restore
as new iPhone?

After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

Problem with Linksys WRT54GS router? Please help.

Alright, so I have the WRT54GS, and for the longest time after I bought it, it worked just fine, but I've been experiencing problems lately. We have 2 computers running off the router. One is a wired connection, and mine is wireless, which I'm starting to hate. So whenever I'm playing any kind of game that takes up a lot of bandwidth, such as Call of Duty 4, it's been really laggy, and I get connection interruptions quite often. It disconnects me from all my online programs and, i have to wait about 20 seconds and the connection returns again. It's almost as if the router is just under strain and temporarily gives out? It happens if the other computer is running, or if mine is the only one being used. I really hope this problem is normal and fixable, because I don't have the money for a new router. So I'm wondering, can anyone help me? Please, any suggestions are appreciated. Thanks.

Try the steps below to see if it will help.
There are many reasons for a poor wireless connection, and many ways to solve this issue.
1.      Give your network a unique SSID and do not use Linksys and set your SSID Broadcast to enable.
2.      You can also try A different channel. There are 11 channels and 1, 6 or 11 is better
3.      You can try raising your router approximately 4-6 feet above the floor and make sure the antennas are vertical.
4.      access your wireless software by going to your Profile or preferred networks, if any are named Linksys or ones that you do not know please delete them. Go to the settings or properties and check the information to make sure it is correct.
5.      See if there are any updated drivers to download.
6.      Try to use WPA encryption if you can
*** As always upgrade to the latest firmware
Good Luck,
Ttech

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

Wireless WRT54G problems help please

A few days ago i set up a FTP server with my Wireless WRT54G V.3 wireless router. Then the next day i wasnt able to connect to it. I tried everything. But couldnt get it to work. So i just went into the router setting and put factory settings. After that, the router wasnt able to give anything that connects to it a 192.168.?.? ip. Everytime i connect to it i get an ip of 169.I tried everything... and then i thought to myself, i messed up my router. So then next day i got another used router from one of my friends... its a wireless WRT54G V. 5 and when i try to set it up.... I get the exact same problem =\..... anybody has any idea... ive tried calling linksys but i was on hold for like 40 minutes and i gave up..... can anybody help?

If you have an extra ethernet cable you may reconfigure the router manually. For step-by-step instructions you may check it out from homesupport.cisco.com. You may also download the setup wizard from this website.

WRT54GS HUGE PROBLEM, HELP!

I just can't get this thing to work! Everything is connected, but sometimes it says "Router not Supported" and "Cannot connect to internet" during setup. I've been on this setup for 2 hours now, and I can't find out the problem at all... I'd really appreciate any help at all and advice, thanks.
Message Edited by Shan5672 on 11-23-2007 04:35 PM

Please help!!! also I've gotten to a point where everything works BUT the internet... any ideas?! and I've done that restart the router etc, STILL NO INTERNET.:[
Message Edited by Shan5672 on 11-24-2007 08:51 AM

WRT54GS v.6 Problem -- HELP!

Similar Messages

Maybe you are looking for