WRT54GS V6 Firmware Upgrade

I am trying to do a firm ware upgrade to the WRT54GS V6 router.  However, when I go to its web page (192.168.1.1) -  alI get is the layout of the Linksys web page, but no text labels or links.  I can not do anything - any suggestions?

I used Firefox 2.0.0.2 and IE 7.0 Just this morning without such incident. The problem is definately in you computer.
I'd imagine that the page loaded improperly the first time and it's now stuck in your browser cookies erroneously. Exit the poorly loaded page, then clear all cookies, browser histories and temporary files, and then close and restart your browser. When you go back to the IP address page it may load properly the second time.
Hope this helps!

Similar Messages

  • WRT54G V8 firmware upgrade, easylink issue

    I was having the typical dropped  connection issues  that these routers seem to be famous for (WRT54G).   The easylink application was installed and working.  I upgraded firmware to the newly released 8.00.4.  After the firmware upgrade the easylink app.  still worked for all functions except for setting wireless security.  For that, any changes had to be input manually through the web based utility or whatever it is called (inputting 162.198.1.1)  in the adress bar. 
    I had a software conflict and had to uninstall the Easylink advisor software and then reinstall it.  After reinstalling,  the easylink will not recognize the router at all.  Message states something to the effect that the router is either an old Linksys not supported by easylink or another brand.  I know this has to be because the easylink has not been updated to work with the new version of the firmware.
    Is there any way to get the Easylink advisor to recognize the router with the new firmware?
    Or, is there a link to the previous firmware version so that I can flash the router with the previous version?  Then I could get the easylink to recognize the router again and will only lose security access after I re-flash with the new firmware.
    Or, is there anything else I can do to get the easylink advisor software to recognize the Router with the new Firmware installed?
    Thanks

    The Easy Link firmware should connects using the new firmware ....
    Reset the router for few seconds ,.......After reset disable all firewall & run Easy link tool .....
    It will work .....

  • WRT54G v6 firmware upgrade under Vista problem

    I'm not sure if this is related to Vista or not.
    I downloaded the correct firmware version for WRT54G v6 and selected upgrade using the web interface. After a few minutes, the browser directed me to a site with the following URL
    http://192.168.1.1/upgrade.tri
    My IE7 had problem displaying this page and the Power LED on the router kept blinking. I tried to connect to the web interface and it was still showing Firmware Version: v1.00.9
    I don't think there is anything wrong with what I did and not sure if the upgrade was successful. Any suggestions?

    I had the same problem. I found the solution here http://www.scorpiontek.org/portal/content/view/27/36/1/3/:
    This could be because you are accessing the router over HTTPS. You cannot upload firmware or settings to a WRT54G v5 over a HTTPS connection unless you have Linksys firmware v1.00.9 or later. Try accessing it using just plain HTTP.
    Enabling and using http instead of https worked for me. No need to reset or reconfigure.
    I upgraded from 1.00.1 (IIRC) to 1.02.2.

  • WRT54GS V6 - Firmware upgrade needed (2.07.1) not available?

    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing?  Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)

    gasnyder3 wrote:
    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing? Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)
    What is the model number plus version of your router?
    In your heading you say you have GS ...in your message you say you have a
    G router You also say in your message you are upgrading from G V3 to GS
    v6
    If you have a G router you have to update to the latest G firmware not GS and vis versa

  • Determining Ver number on WRT54G for firmware upgrade

    I can find no version number in the config or on the box.
    How do I determine which version of firmware to use 1.0, 1.1, 2.0, 2.2,  etc
    thanks

    Found it !
    Save a restore file and the name will have a version number in it.
    I have a version 1.0

  • Firmware upgrade for WRT54G v7

    is there no firmware upgrade for WRT54G v7? i didn't even find version7 as listed in linksys page for routers....

    Click on Download and save the file on your Desktop..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use dmin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab-Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"  After the firmware
    upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Firmware Upgrade for WRT54G

    I have download latest firmware Version 8, I completed the firmware upgrade successfully, however on the router page right on the top it still show the earlier
    version 1.02.
    How do I checked whether I upgraded to Version 8. I have followed the firmware upgrade procedure and try the next lower version 6 but still show Version 1.02.
    Is my router faulty, as it revert back to factory default after 1 month of new router
    configuration.
    Cheers!
    Raymond Chang

    On the tag all it means is that you have the version 5 of that router.  Linksys will make them diferently (different chips etc.. etc..).  Now the firmware version is the version of (software) installed on the chip in the router.  If you tag says you have a version 5 you need to install the firmware for a version 5 router.  The latest firmware is version 1.02.2 which came out 7/02/2007 for the version 5 router.
    Here is a link to the WRT54G v.5 router.
    http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=116685983740...
    Richard Aichner (Ikester)

  • Firmware Upgrade for a WRT54G v8.1 Router

    I just resolved a connectivity problem by downloading and installing the binary
    file "FW_WRT54G_8.1.09.02_US_20071227.bin".
    After this upgrade, I was somewhat confused by the new displayed Firmware Version under Router Status in administration.  My new version is displayed as
    "8.01.09 build 01 Dec. 27,2007".  The date seems to agree with the downloaded binary file name.  The Release Notes for this latest firmware defines this download as "Last Firmware Version: 8.1.09 build2".  There is an associated Firmware Date of April 10th, 2008.  Do I have the correct file downloaded and installed for the WRT54G v8.1 Router or is there something else that I need to do to complete the firmware upgrade?
    There is one difference that I have noticed in my new configuration that is somewhat strange, as well.  I no longer have the ability to use "MAC Address Clone" in Setup.  It is grayed out. Please advise whether this is normal with this new Firmware.

    Yes, I am quite certain that the firmware was upgraded from version 8.01.08 build 02 Oct. 26, 2007.  The Router was reset after the upgrade and completely reconfigured.  The "MAC Clone" option remains grayed out after several attempts, but all other features are functional.  I have gained connectivity by this firmware upgrade to a Time Warner - Road Runner, Broadband System.  I may still want the MAC Clone feature in the future.
    Thank You!

  • Having problem with firmware upgrade on WRT54G V8

    i have searched the forums but havent found an answer. i just got a WRT54G V8 router and was about to update the firmware. i downloaded the .bin file and went to my router ip addy and then to the firmware upgrade tab but when i went to click the browse button nothing happened. does anyone know whats wrong?

    If you are using the wireless computer then,do not use it to make any changes or upgrading the firmware on the router.Use the wired computer.If you are using the wired computer then,try to use the different browser (preferably IE)or different computer.
    If that does not make any difference then,hard-reset the router and try to upgrade the firmware.

  • WRT54G Ver 1.1 Firmware Upgrade

    I was experiencing some connection problems that were causing me to cycle the power on my router a few times a week. I decided to upgrade the firmware to 4.21.1 hoping to resolve this issue. The firmware upgrade completed and all configuration settings were put back as I had before the upgrade.
    Since the update, I cannot connect to the internet through my DSL when connecting through the router. I can connect to the internet when my computer is directly connected to the modem. I called Linksys and I was told to reset the router three times. Had no results.
    Can anyone help me out with this? Or is there a place where I can download the old firmware that I originally had?
    I have a WRT54G ver 1.1 and Bellsouth DSL
    Thanks
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 11-20-2007 08:55 AM

    --Update--
    I solved the problem. The Bellsouth DSL modem is in bridge mode after it is either reset (hard button) or configured via the web utility.
    WITHOUT connecting the router to the modem, configure the router to be PPPoE insted of DHCP. If the router is connected to the modem while still in DHCP mode, the modem will assume the router is a computer. This will kick the modem out of bridge mode.
    So the steps to solve the problem are:
    1) Disconnect ethernet between router and modem.
    2) Reset modem / put in bridge mode.
    3) Connect to router via web utility and configure PPPoE settings.
    4) Connect router and DSL modem via ethernet cable.
    (Mod Note: Edited due to non-compliance of forum guidelines.)
    Message Edited by OnnagokorO on 11-20-2007 06:50 PM

  • WRT54G v1.0 Upgrading Firmware

    I'm trying to upgrade the firmware for a WRT54G v1.0 (i think, it does not have a version # on the sticker).  I have downloaded the firmware (had to go thru a google cache to get to the link cuz linksys support page is down.)  I unziped the file. I did a hard reset (60.60.60).  Then I logged into my router (admin pass so I know the reset worked) went to "System>Firmware Upgrade>Upgrade" the dialog opened.  I then bowsed for the .bin file found it opened it and clicked "Upgrade".....nothing happend....waited....still nothing, no progress bar, nothing, nada, neah... whats up??
    I can still access the router like normal and ect its just the upgrade dialog that seems broken.
    So, Any ideas??
    PcCowboy (Caleb)
    (Mod note: Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 01-04-2010 10:59 AM
    Solved!
    Go to Solution.

    Well since no one seems to know the cause of my problem I guess ill just go over to the www.dd-wrt.com website, they will prob be able to help and they clam to get better results from their firmware.
    Ta-ta.
    PcCowboy

  • Firmware upgrade required: A huge WRT54G IS the internet!

    On South Park last night ... it was revealed that a giant Linksys WRT54G router IS the internet! Apparently though, this router needs a firmware upgrade because it had some blinky light issues (it had to be power cycled to get the internet working again.)
    I demand to know: what is Cisco doing to address problems in this critical piece of our national infrastructure?
    Cheers,
    Davester

    Not yet.

  • WRT54GS V.4 Firmware upgrade failed.

    Hi,
    I need help on the unit on the firmware upgrade.
    Info:
    Device Model No.: WRT54GS v.4
    Webpage firmware Version: v1.06.3
    I had download the Version 4 firmware and upgrade fail.
    Please help!!!!
    Thanks

    Are you getting any specific error..?
    Which browser you are using...?
    Are you upgrading the router's firmware from wireless computer...?
    Use the hard-wired computer (connected to the router) and try to use Internet Explorer to upgrade the router's firmware and check.

  • WRT54GS Version 5 Firmware Upgrade

    I am confused as to how to update the firmware on my WRT54GS Version 5 Linksys router.
    I went to the support section on here, but there are five different options of router firmware upgrade. I bought this a year ago and figure it needs the update, can someone help me?
    The choices I found on here are:
        Upgrading the Linksys VPN Router's Firmware
         Upgrading the Linksys Wireless-G Access Point's Firmware
         Upgrading the Linksys Wireless-G VPN Router Firmware
         Upgrading the Linksys Router
         Upgrading the Linksys VOIP Router's Firmware
    Which one would I want for this basic network router? The reason I ask is because my wireless Internet is constantly down. It won't work unless I do a hard reset of the router each time. It is annoying that I have to do this all of the time. I have never had this problem in the year I had it until six weeks ago. I have to reset it numerous times to get it to read the Internet and then go into the settings and rename it each time. Also, the router and my PC and my landlords laptop always connect through to the router fine, it is just the Internet causing problems.

    Hi… you can use choice no. 4 which you’ve mentioned, enter the model number >> WRT54GS >> select version 5 and save .bin firmware file on computer and upgrade it according steps…

  • WRT54G ver.6 no WLAN after firmware upgrade

    I just did a manual firmware upgrade for the router (WRT54Gv6 v1.02.2_fw)... when I went to rest it by holding down the rest button for 30 seconds, nothing appeared to happen. The light for the WLAN is now out. When I go to directly connect it to a computer, it says 'limited connectivity' local only. The Power, 1, and Internet lights still blink. I cannot access the web browser utility at 192.168.1.1 (nothing loads). Resetting still doesn't appear to do anything (lights don't flash off or change or anything)... Any ideas?

    Open a DOS window and do "ping 192.168.1.1". If you get replies, there's still a chance. If it times out or any other error message then it can't be helped. If the router is less than 3 years old, call linksys for a replacement.
    The box said windows xp or better... So I installed Linux!

Maybe you are looking for

  • Two iTunes accounts on one computer one iPad

    Hi, In our house we have an iMac with two user accounts on it - my account and my wife's. We have separate iTunes accounts, and share music between them. We have recently bought an iPad, which is synced to my iTunes account. However it's a shared mac

  • Vendor balance profit center wise

    Dear friends my client need profit center wise vendor report but its not in the standard report fbl5n can any body help me to get the solution

  • Shuffle play videos on TV

    I have everything set up and my ipod plays videos on the TV. With the remote, if you click the skip button the videos just turn off, and I have to go select another video manually from the ipod. I would prefer to have a shuffle play for my music vide

  • Import Purchase Records not working

    I am trying to use the standard Asset Management import file but no records get created. IT is a tab-delimited ASCII text file with one record named ZAM.txt. There is no Error message. Please help me get this entry imported so I can start to collect

  • Assistance in making CD label

    I am a NEW user to photoshop premiere elements 9.  I am trying to make a CD label and everytime it comes up that I need to do a download, but then states it cannot open the file for the download What am I doing wrong?