Wrt54gs v6, ping timed out
hi.
i've bought wrt54gs v6 (upgraded to v1.50.9 firmware) 2 weeks ago and had several problems with it, most of them are solved by now but still 1 left, a very annoying one.
It occurs every few hours - i cannot open the setup page (or it takes ages to open) nor ping the router (returns 'timed out' info), at the very same time my internet connection seems fine (might be a bit slower, but it can be only impression, i haven't actually checked it), and i can ping other computers in my network. After reseting router everything goes back to normal for another few hours, or few minutes sometimes. I tried nearly everythink to solve it, contacted linksys online support, gone through few forums and didn't succeed to solve it.
I've got 4 computers in my network (3 wired and 1 wireless), all running win xp, no firewall is installed on my comp.
Did anyone have similar problem? Is it something wrong with my configuration or can it be the router itself?
Thanks for help.
Well I'm not a professional and I don't own the same router as you but it seems to me it's a download issue. Is it possible you have someone sucking the life out of your internet connection?
I have the exact same issue with a roommate of mine and the reason for the internet being slow and pretty much non-existant is because of BitLord, BitTorrent, UTorrent and any other programs that use multiple ports.
If the version of WindowsXP they minimized the avalible ports that used to be avalible in Windows2000 and earlier versions. In doing so there are fewer ports and more activity on these ports.
But in the end if someone is using BitTorrent in your home they are sending out multiple packets and the outside world is sending multiple packets to your door step. Now if you want good download speeds with BitTorrent you have to open the floodgates and allow people to upload from your machine too. That is the beauty of BitTorrent. However, in doing so your router is bottlenecked and hense you have no internet.
Hope this helps you find your problem.
-K
Similar Messages
-
Connection to oracle9i error (ping timed out after connecting to database )
i have problem wtih connection to database.
ping to server is ok , port 1521 is open
when i want to connect to database , ping to server timed out
i have a distance between my pc and my server , about 100 m
cable utp
any solution for my problemc:\> ping 10.1.110.1
Reply from 10.1.110.1: bytes=32 time<1ms TTL=128
C:\>tnsping 10.1.110.1
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 29-NOV-20
07 15:33:09
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=10.1.110.1
))(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.110.1)(PORT=1521)))
TNS-12535: TNS:operation timed out
my sqlnet file
# SQLNET.ORA Network Configuration File: D:\oracle\ora92\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME) -
I want to troubleshoot what causing the connection unstable between workstation and server. When i try do the ping test, the reply sometime 'Request timed out' Any idea what likely the cause of this issue?
I tried change network adapter, change network cable, change network port, reassign different ip address to the server. Still the result remain. I got another server on the same rack and same ip segment(base), but the other server is ok.
Any idea on this guys?
Thanks.Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Anyone any ideas why I cannot ping my IP address? All I get is 4 lines of Request timed out
Solved!
Go to Solution.Unless you are using static/permanaent IP addresses, the address you have can change. First I would make sure that the address that you are pinging is the correct address. If you are on windows open a cmd/command prompt and run ipconfig, you should be able to figure out the IPv4 address from this and use that in the ping. If this fails then as Ectophile says you likely have a software firewall that is blocking the ping - have you recently install an anti-virus suite that includes this?
Assuming that this works and that you have home wifi/lan, from the ipconfig output there is also a 'Default Gateway' address, this should be your router, try pinging this address. If this works then everything is should be fine from your pc to your router.
Next, in your router config somewhere it should give you the IP address that it got from the network, ping this to verify that you can communicate from your pc to the external interface on your router.
Taking this further, on the same screen on your router there is likely information for the routers 'Default Gateway', if you ping this address it tells you that you can ping from your PC through to the exchange equipment.
/AGeezer -
I have difficulty to connect FP-1601 to my computer using MAX. "The connection to remote device timed out." message pop up everytime. Any suggestions?
Thanks.
If you already assigned an IP address to your module, try pinging it first (Start>>Run>> Ping x.x.x.x).
If you don't get an answer the problem is there. A common cause for this is using a wrong cable. If you are connecting directly from your network card you will need a cross cable.
Another potential problem is firewall blocking. You need to allow MAX in your firewall.
Yet another is not being on the subnet as the device and having the subnet mask block your communication.
Did you manage to talk to it in the past?
Does it have an IP address?
Attached please find the Pinging result.
Attachments:
TimedOutPingResult.bmp 2305 KBA couple of Dont's:
DON'T start a new thread to continue the discussion. It only makes it less likely you will get an answer. Simply reply in the original thread.
DON'T post bmp files. Paint in Windows XP can save files as JPG, PNG, and GIFs.
OK, so you can ping it (assuming that's the device, you should disconnect it and run the ping again to make sure. If there is no answer, it means it is the device).
In that case, it's possible that the firewall is blocking MAX. Do you have any other networked controller connected which work?
To allow MAX in the firewall go to the firewall settings (probably in the control panel) and find the list of the allowed programs. Add MAX to that list and see if that helps.
Try to take over the world! -
Hi
We have a standalone oracle application server 10.1.3 with a J2EE application deployed to it which provides webservices to support a website. Intermittently the performance of the application deteriorates and then the oc4j instance restarts itself.
We see the following entries in opmn.log
OC4J ping attempt timed out
[libopmnoc4j] Process Ping Failed: oc4j~<instance name>~default_island~1 (1132071111:2340)
[libopmnoc4j] Process Unreachable: oc4j~<instance name>~default_island~1 (1132071111:2340)
[pm-process] Restarting Process: oc4j~<instance name>~default_island~1 (1132071111:2340)
[pm-process] Stopping Process: oc4j~<instance name>~default_island~1 (1132071111:2340)
[libopmnoc4j] Forcefully Terminating Process: oc4j~<instance name>~default_island~1 (1132071111:2340)
[pm-process] Starting Process: oc4j~<instance name>~default_island~1 (1132071111:0)
[pm-process] Process Alive: oc4j~<instance name>~default_island~1 (1132071111:2996)
Following note 761675.1 on metalink we added the following parameters to opmn.xml
<ping timeout="60" interval="60"/>"
<data id="reverseping-failed-ping-limit" value="5" />However the note does not specify where in opmn.xml the lines should be placed. We are hoping that these parameters will prevent the oc4j instance from restarting when the performance deteriorates.
I managed to get the parameters into a valid place in the file but am concerned that they are not in the correct place to have the desired effect. The relevant part of opmn.xml below - does anyone know if the parameters are in the correct place?
<process-type id="test_oc4j" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -d64 -XX:+CMSIncrementalPacing -XX:+CMSIncrementalMode -XX:+CMSParallelRemarkEnabled -XX:+DisableExplicitGC -XX:CMSFullGCsBeforeCompaction=1 -XX:CMSInitiatingOccupancyFraction=90 -Dcimsservice=true -Dexecutor.concurrent.tasks=100 -Djava.util.logging.config.file=$ORACLE_HOME/j2ee/home/adminclient.properties -Xmx9184m -Xms9184m -XX:MaxNewSize=32m -XX:NewSize=4m -XX:SurvivorRatio=1024 -XX:MaxPermSize=512m -XX:PermSize=512m -Xss10m -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -DApp.Name=cims_cms -Dcims_cms.java.naming.provider.url=ldap://localhost:389/dc=config,dc=prologic -Dcims_cms.java.naming.security.authentication=simple -Dcims_cms.java.naming.security.credentials=secret -Dcims_cms.java.naming.security.principal=cn=Manager,dc=config,dc=prologic -DcountryNameSchemaName=c -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=true"/>
<data id="java-bin" value="/opt/wcms/java/jdk1.6.0_02/bin/java"/>
*<data id="reverseping-failed-ping-limit" value="5" />*
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/test_oc4j/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
</category>
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="default-web-site" range="12501-12600" protocol="ajp"/>
<port id="rmi" range="12401-12500"/>
<port id="rmis" range="12701-12800"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_group" numprocs="1">
*<ping timeout="60" interval="60"/>*
</process-set>
</process-type>thanks
paul
ps the lines I added are supposed to be in boldShould be something like this
<process-type id="home" module-id="OC4J" status="enabled">
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<ping timeout="40" interval="30" retry="2"/> (1)
</process-type>
Greetings. -
VPN client get connect but Request Timed out when ping
Hi, I'm using the cisco 837 router as my VPN server. I get connected using Cisco VPN Client Version 5. But when I ping the router ip, i get request timed out. Here is my configuration :
Building configuration...
Current configuration : 3704 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname michael
boot-start-marker
boot-end-marker
memory-size iomem 5
no logging console
enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0
aaa new-model
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network sdm_vpn_group_ml_1 local
aaa session-id common
resource policy
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp pool michael
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 202.134.0.155
ip dhcp pool excluded-address
host 192.168.1.4 255.255.255.0
hardware-address 01c8.d719.957a.b9
ip cef
ip name-server 202.134.0.155
ip name-server 203.130.193.74
vpdn enable
username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f.
username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp xauth timeout 15
crypto isakmp client configuration group michaelvpn
key vpnpassword
pool SDM_POOL_1
acl 199
netmask 255.255.255.0
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SDM_DYNMAP_1 1
set transform-set ESP-3DES-SHA
crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1
crypto map SDM_CMAP_1 client configuration address respond
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
interface Ethernet0
description $FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
interface Ethernet2
no ip address
shutdown
hold-queue 100 out
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet1
duplex auto
speed auto
interface FastEthernet2
duplex auto
speed auto
interface FastEthernet3
duplex auto
speed auto
interface FastEthernet4
duplex auto
speed auto
interface Virtual-PPP1
no ip address
interface Dialer1
description $FW_OUTSIDE$
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname ispusername
ppp chap password 0 isppassword
ppp pap sent-username ispusername password 0 isppassword
crypto map SDM_CMAP_1
ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723
ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21
ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
access-list 1 remark SDM_ACL Category=16
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 102 remark SDM_ACL Category=2
access-list 102 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
route-map SDM_RMAP_1 permit 1
match ip address 102
control-plane
banner motd ^C
Authorized Access Only
UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED
You must have explicit permission to access this device.
All activities performed on this device are logged.
Any violations of access policy will result in disciplinary action.
^C
line con 0
no modem enable
line aux 0
line vty 0 4
scheduler max-task-time 5000
end
Thank you, anny help will be appreciated.Thank you for your response, here is the debug :
Log Buffer (4096 bytes):
1 15:19:47.011: ISAKMP: set new node 856647599 to QM_IDLE
May 1 15:19:47.015: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2182802952, message ID = 856647599
May 1 15:19:47.015: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8A
May 1 15:19:47.015: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):purging node 856647599
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:49.979: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B4F274, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:49.983: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B4F274, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:58.383: ISAKMP (0:134217736): received packet from 120.168.1.24 dport 4500 sport 52667 Global (R) QM_IDLE
May 1 15:19:58.383: ISAKMP: set new node -1340288848 to QM_IDLE
May 1 15:19:58.387: ISAKMP:(0:8:SW:1): processing HASH payload. message ID = -1340288848
May 1 15:19:58.387: ISAKMP:(0:8:SW:1): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = -1340288848, sa = 81A7DCEC
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):deleting node -1340288848 error FALSE reason "Informational (in) state 1"
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:58.391: ISAKMP:(0:8:SW:1):DPD/R_U_THERE received from peer 120.168.1.24, sequence 0xA3285B8B
May 1 15:19:58.391: ISAKMP: set new node -752454119 to QM_IDLE
May 1 15:19:58.395: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2182802952, message ID = -752454119
May 1 15:19:58.395: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8B
May 1 15:19:58.395: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):purging node -752454119
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81F84148, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81F84148, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
After searching thru the internet, I've found :
CSCsb46264
Symptoms: When a dialer interface is configured as an endpoint for a IPSec+GRE tunnel, tracebacks with bad refcount may be generated.
Conditions: This symptom is observed on a Cisco 837 when router-generated packets such as routing updates are being switched.
Is that possible that the root of the problem was that ? Thank you. -
Westell 7500 (2nd one) intermitant internet, timed out pings.. etc etc
welll, where to start,
About 1 week ago we started having issues with slow too no internet.
Let it go for a day or so before I called Verizon.
The automated lady does a line test. They see a problem. I end up talking with a person, run through all the normal stuff.
They send out a tech.
When the tech comes he deduces quickly that I have line issues.
So he orders a new run to my house made. I guess.
Next day around 3:00 pm the internet dies completely. Dead. Blinking DSL light no internet light.
So I call back up, they can't send someone that day so the next day they can.
So I stay home yet again.
They came on Thursday and after about 15~20 he figures out how they wired up out side does not match up what i have in the house. So we go downstairs rewire that one port.
It works... yeaaa.. and it is SCREAMING...
After about 2~3 hours of surfing/game playing.. the internet dies, intermittently, again.. back too step one.. great...
Soo i am furious at this time.. I call again.. after about 2hours on the phone and 4-5 different people.. i have someone coming the next day... that is day #3 for no work.. thank gawd i have tons of days to lose. The one advanced tech i talked to said well lets send you a different modem and a different model. I was happy happy .. great let's get rid of the 7500.
So I stay home. The usual, stay here to from 8am~5pm for the tech.. At 3pm i start to worry that they forgot about me. Well i called and after 15~20 mins i find out they did .. Oh and my new modem showed up, wow that was fast. And its an 7500 *sigh*.
Well found out the modem he wanted to give me is no longer aloud to be shipped so they shipped me the same model.
Well after I found out that there was no one coming i just installed the modem myself.
I plugged it in. It works. So i am ok at this point in time.
Well later on that night i have NO internet again. At this point time i set fire to the house. Just kidding but that is how I felt.
sooo here some data ..
from right now this is what my ping to my modem looks like....
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time=7ms TTL=64
Reply from 192.168.1.1: bytes=32 time=6ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2ms TTL=64
Reply from 192.168.1.1: bytes=32 time=5ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
This is what my ping to the outside world looks like... to google actually.
Reply from 64.233.169.103: bytes=32 time=51ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=68ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=53ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=259ms TTL=237
Reply from 64.233.169.103: bytes=32 time=50ms TTL=237
Reply from 64.233.169.103: bytes=32 time=48ms TTL=237
Reply from 64.233.169.103: bytes=32 time=51ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=49ms TTL=237
Reply from 64.233.169.103: bytes=32 time=46ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=47ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=45ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=44ms TTL=237
Reply from 64.233.169.103: bytes=32 time=45ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=52ms TTL=237
Request timed out.
Reply from 64.233.169.103: bytes=32 time=51ms TTL=237
Mind you this is "new lines" and "new modem".
Any ideas?
HELP PLEASEEEEAll righty .. got another tech in here... he is actually very good and is just as confused as i am... did i mention i am windows system admin for a college... well anyways... unfortunately networking is not my field..
I do not have good news as, i am still having problems.. about 1.5 hours after he left i got a time out again.. solid dsl no internet...
Mind you this is a brand new 7500 modem...
I have been reading about a possible issue with the modem "over heating" because of the wireless.. and that if you turn it off this issue will go away.. the timeouts that is... I refuse to even try this as this is not a solution .. so i tried dropping my wireless down to B and no wep, just MAC address filtering... I also lengthened the amount of time that the ssid broadcast goes out... figured less is more.. less work it has to do the less heat it will produce...
well this is to no avail..
As for you people with slowness issues... cause mine really isn't slowness at this time.. They replaced the run to my telco box and that seem to help... i am getting great speeds... i just can't stay on...
hope any of this helps... -
Getting the messeage request timed out when trying to ping
I can't ping but can be pinged. Done all the steps here: /t5/Hamachi/Ping-Request-Timed-out/td-p/121480 still no succes. I have made rules regarding hamachi in my firewall and i have ran diagonstics in hamachi, it says everything is allright, but still the pings doesn't work. Can be pinged though. I am running Win 10 64bit. But one thing that have caught my interest is this, the hamachi network driver seems to not have a internet connection, but maybe this is normal? : https://gyazo.com/bfbe4e6bcf0b0caff44fdadabaaae865 Translation from swedish:IPv4 Connection: No Network Connection.IPv6 Connection: No Internet Connection. I hope someone out there has the answer to my question! Thanks in Advance!! Best Regards, FiskarN, AkA Elias!
Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Tnsping timed out using dg4odbc from Oracle to MYSQL through ODBC
Hi,
I encountered problem when trying to connect from Oracle to MYSQL using dg4odbc, hope you can shed some light
Oracle database is 11.1.0.7 on SUSE Linux 64-bit.
Since the application which runs on MYSQL DB only offers ODBC driver on Windows platform, so I installed the 32-bit ODBC driver (from ServiceNow) on a 32-bit windows server (driver download from http://wiki.service-now.com/index.php?title=ODBC_Driver) .
created system DSN: MYSQLDEV, The DSN connection works fine. I then installed Oracle 11.2.0.1 gateway for ODBC 32-bit on the same windows server, the following configurations were done:
On 32-bit Windows server:
in gatewayHome\hs\admin
initMYSQLDEV.ora:
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLDEV
HS_FDS_TRACE_LEVEL = DEBUG
in gatewayHome\network\admin:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdes.sda.sdva.com)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=MYSQLDEV)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4odbc)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
stop and started listener on windows server and check listener status
C:\product\11.2.0\tg_1\bin>lsnrctl status listener
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2012 21:42:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-MAR-2012 21:11:36
Uptime 0 days 0 hr. 30 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\abcdes\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
Services Summary...
Service "MYSQLDEV" has 1 instance(s).
Instance "MYSQLDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
On Linux server where Oracle DB resides.
Added the following tns entry "jelly" on the Linux server ORACLE_HOME/network/admin:
jelly =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)
(HOST=abcdes.sda.sdva.com)
(PORT=1521))
(CONNECT_DATA=(SID=MYSQLDEV))(HS=OK)
tnsping from Linux server (64-bit) failed with timeout error:
tnsping jelly
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 29-MAR-2012 21:12:38
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=abcdes.sda.sdva.com) (PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV))(HS=OK))
TNS-12535: TNS:operation timed out
tnsping from Windows server works fine: (added same tnsnames entry on windows server for testing purpose only)
C:\product\11.2.0\tg_1\bin>tnsping jelly
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2
012 21:45:20
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\product\11.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV)) (HS=OK))
OK (20 msec)
if listener is not listening to the service, then the tnsping on the windows server should fail as well.
I don't know why only the tnsping from Linux failed, is it due to the 32-bit ODBC uncompatibility with 64-bit oracle server? or my configuration problem?
Of course, when I created the DB link from oracle, the connection failed with
create database link mysqldev connect to xxxx identified by "xxxxx" using 'jelly';
Database link created.
select * from tab1;
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLDEV
Thanks for your help,Hi Mike,
This is part of the tnsping.trc file which contains the error. IP address is in the tnsnames entry with this tnsping.
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: Tcp conn timeout = 0 (ms)
nttcni: trying to connect to socket 5.
ntt2err: entry
ntt2err: soc 5 error - operation=1, ntresnt[0]=505, ntresnt[1]=110, ntresnt[2]=0
ntt2err: exit
nttcni: exit
nttcon: exit
nserror: entry
nserror: nsres: id=0, op=65, ns=12535, ns2=12560; nt[0]=505, nt[1]=110, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: cur = 53b9f8
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsiofrrg: exit
nsiocancel: exit
nsvntx_dei: entry
nsvntx_dei: exit
nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=53a7e0 nsntx=53ade0
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: exit
nsiocancel: exit
nsmfr: entry
nsmfr: 2712 bytes at 0x53ade0
nsmfr: normal exit
nsmfr: entry
nsmfr: 1528 bytes at 0x53a7e0
nsmfr: normal exit
nsopen: error exit
nscall: error exit
nscall: entry
nscall: connecting...
nsclose: entry
nsclose: normal exit
nladget: entry
nladget: exit
nsmfr: entry
nsmfr: 264 bytes at 0x528900
nsmfr: normal exit
nladtrm: entry
nladtrm: exit
nscall: error exit
nlse_term_audit: entry
nlse_term_audit: exit
Thanks, -
"Licensing timed out" when creating to Remote Desktop Connection
Our company have two site (SiteA and SiteB), both have its own DC (SiteA.xx.local and SiteB.yy.local). A Windows 2012 Server setup a Terminal Service. All SiteB user will use remote desktop to connect to the Terminal Server.
Sometime it will prompted an error "A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again." Before this error message shown, the connection box
will show the status "Estimating connection quality" for a while (my last test this will stay for 2 min 30 sec. before Licensing timed out prompt).
When we face this error, the only way to solve it is to reboot the Terminal Server. Once reboot, everything will be fined, all user can connect again. But sometime later (no fixed time period, from two hours - two days), user
will then have this problem. But we need to reboot server again.
I can't found in what situation this error will happened. But we do experienced the following situation.
1. Sometime the a RDS Connection just stopped directly. Then try to reconnect but failed. In this case, all other users are still using it.
2. I try to unplug a network connection for a client, it show the connection is lost and trying to reconnect. After I plug the network back. Cancel the reconnect process. Then open the remote desktop again it will have the error.
3. there has two machine will never have this problem (we have this problem for 3 months). no matter how the connection lost. it can built up the connection once the connection is back
I followed some forum to enable the netlogon.log. On the Server, I found:
1. [MISC] [872] In control handler (Opcode: 4): This log must there when the problem happened.
Not sure if the following log help:
1. NetpDcGetName: SiteA.xx.local. using cached information ( NlDcCacheEntry = 0x000000DE96694D50 )
2.DsGetDcName function returns 0 (client PID=2088): Dom:SiteA Acct:(null) Flags: NETBIOS RET_DNS
3. NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c03ffff1
4. DsGetDcName function called: client PID=23532, Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS (I found some log will be Dom:SiteA install of Dom:(null) )
5. NlTimeoutApiClientSession: Unbind from server \\SiteA-DC.Stingmars.hk.local (TCP) 0.
6. NlPrintRpcDebug: Couldn't get EEInfo for I_NetLogonSamLogonEx: 1761 (may be legitimate for 0xc000006e)
On the Client side: Not sure if the log can help:
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:01 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: DS
07/11 11:56:01 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:01 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:01 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:01 [MAILSLOT] Sent 'Sam Logon' message to SiteB[1C] on all transports.
07/11 11:56:01 [CRITICAL] NlBrowserSendDatagram: No transports available
07/11 11:56:01 [CRITICAL] NetpDcGetNameNetbios: SiteB: Cannot NlBrowserSendDatagram. (1C) 53
07/11 11:56:01 [MISC] NetpDcGetName: NetpDcGetNameNetbios returned 1355
07/11 11:56:01 [CRITICAL] NetpDcGetName: SiteB: IP and Netbios are both done.
07/11 11:56:01 [MISC] DsGetDcName function returns 1355: Dom:(null) Acct:(null) Flags: FORCE DS
07/11 11:56:02 [MISC] DsGetDcName function called: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:02 [DNS] NlDnsHasDnsServers: DNS Server is NOT configured on this machine.
07/11 11:56:02 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
07/11 11:56:02 [MISC] NetpDcGetName: SiteB using cached information
07/11 11:56:02 [MISC] DsGetDcName function returns 0: Dom:(null) Acct:(null) Flags: LDAPONLY RET_DNS
07/11 11:56:03 [SESSION] V6 Winsock Addrs: fe80::bd63:1d49:d8fd:724%12 (1) V6WinsockPnpAddresses List used to be empty.
07/11 11:56:04 [MISC] NlPingDcNameWithContext: Ping response timeout for SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [CRITICAL] NlPingDcNameWithContext: Can't ping the DC SiteB-DC.Stingmars.cn.local.
07/11 11:56:04 [MISC] NetpDcInitializeContext: DSGETDC_VALID_FLAGS is c01ffff1
Thanks
Kenneth LaiHi Kenneth,
Thank you for posting in Windows Server Forum.
Please check the setting and workaround as per below thread.
RDP connection hangs on "estimating connection quality"
http://social.technet.microsoft.com/Forums/en-US/18819bef-5c01-4849-9c61-afb7e8c8a581/rdp-connection-hangs-on-estimating-connection-quality?forum=winserverTS
In addition, also check below details.
Cause: If you are using Internet Protocol security (IPsec) to help protect traffic over TCP between clients and terminal servers, then packet fragmentation might occur. As a result, some packets might not reach their destination, and
client connections to terminal servers might fail.
Solution: Configure IPsec to help protect traffic over UDP rather than over TCP.
Hope it helps!
Thanks.
Dharmesh Solanki -
Request timed out because there has been no reply from the server in 600000
Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winformThis error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
Request timed out when purchasing music. Fresh install of Win7.
For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
"ORA-12535:TNS:operation timed out" error
hi,
I want to connect to my oracle server.If I try to connect my client means"ORA-12535:TNS:operation timed out" error is shown.What should i do to the rectify this problem.Pls give me a solution.
Thanks in advance.
-reg
Lakshman.We are using wiondows XP and oracle 8i.
I am able to ping the host where the database resides.
this problem occurs only when we try to connect this server form the client.I able to connect other servers without any problem.
I able to establish local connections.
I am trying tnsping database service.
client and the server are in same LAN only.
Pls give me a solution.
Thanks in advance.
-regs,
Lakshman. -
ORA-12535: TNS:operation timed out (during DBLINK testing)
Hi,
I have created a database link using the follwoing script :
create database link UIIODS.WORLD
connect to <user_id>
identified by <pwd>
using '(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 147.147.3.41)(PORT = 1552))
(CONNECT_DATA =
(SERVICE_NAME = uiiods)
But when I am executing the sql : select * from [email protected]
it gives the error : ORA-12535: TNS:operation timed out.
I am trying to create the database link from a 9.2.0.5 database server and sid of this service_name is R2SRVR5.world.
Please find below TNS,sqlnet and listener entries of the server R2SRVR5.WORLD :
R2SRVR5_DBSRC.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 157.227.6.39)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = R2SRVR5.WORLD)
UIIODS.PROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 147.147.3.41)(PORT = 1552))
(CONNECT_DATA =
(SERVICE_NAME = uiiods)
# SQLNET.ORA Network Configuration File: C:\oracle\ora92\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# NAMES.DEFAULT_DOMAIN = tcskolkata.co.in
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
# LISTENER.ORA Network Configuration File: C:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = tcs061243)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = R2SRVR5.WORLD)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = R2SRVR5)
(SID_DESC =
(GLOBAL_DBNAME = dbsrc.world)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = dbsrc)
(SID_DESC =
(GLOBAL_DBNAME = NEWDBSRC.WORLD)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = NEWDBSRC)
PING and TNSPING working fine,but DBLINK is not working.
Please provide a solution.
Thanks in Advance,
KoushikHi,
Sorry for late response. Please find below the timing for TNSPING.
C:\>ping 147.147.3.41
Pinging 147.147.3.41 with 32 bytes of data:
Reply from 147.147.3.41: bytes=32 time=246ms TTL=247
Reply from 147.147.3.41: bytes=32 time=242ms TTL=247
Reply from 147.147.3.41: bytes=32 time=237ms TTL=247
Reply from 147.147.3.41: bytes=32 time=227ms TTL=247
Ping statistics for 147.147.3.41:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 227ms, Maximum = 246ms, Average = 238ms
C:\>tnsping 147.147.3.41
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 29-DEC-2005 15:03:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle10g_Home\network\admin\sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=147.147.3.41))(ADDRESS=(PROTOCOL=TCP)(HOST=147.147.3.41)(PORT=1521)))
OK (700 msec)
C:\>tnsping uiiods.prod
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 29-DEC-2005 15:04:02
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle10g_Home\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 147.147.3.41)(PORT = 1552))) (CONNECT_DATA = (SERVICE_NAME = uiiods)))
OK (580 msec)
Please suggest any solution.
Regards,
Koushik
Maybe you are looking for
-
I switched to singapore on the app store, so now i am trying to get back to the U.S app store and it is saying "You have a store credit balance;you must spend your balance before you can change stores" I am trying to save money. What do I do???
-
Can't drag items into finder's sidebar
After upgrading to OS X.6.7, I am no longer able to drag items into the sidebar in the finder window on my iMac. I drag the items into the space under 'PLACES,' but nothing happens. I've read that it's necessary to hold down CMD when dragging an item
-
Insert set of character in a string
hi guys, I have created a string of length 19, i need to insert set of character and compare them if its right format or not.That is for barcode i need. i WANT MY PROGRAM TO GENERATE THIS FORMAT BARCODE. eg : INV40602007RE000155
-
Some buttons on SRM Web screen not enabled
Hi, When a user logs in SRM Web as an approver,the buttons for Approve,Reject are in Grey mode.However the same looks fine i.e. anabled in other system.What is the factor which controls this functionality? We want to make these buttons seen as enable
-
Starting applications automatically upon startup
I tried searching for the answer to this but was unable to find exactly what I was looking for, so here goes my question. There is one application in particular that I would like to start automatically every time I boot my eMac. I know how to make th