WRT54GS v6 Resetting Itself

One week old WRT54GS v6 worked fine until two days ago...
I noticed that the power light was flashing rapidly, then going steady for a while, and then flashing again. I tried to log into the router and I could not. Unplugged, and plugged directly into my cable modem (TimeWarner), and I still didn't get any connectivity.
Rebooted, and all worked fine w/o router in the loop. Downloaded newest firmware from Linksys, reset the router (which took 4 tries for it to finally reset itself), loaded up new firmware, and all was fine.
Worked for the rest of that night, and all through yesterday. Now the thing has reset itself again!?
It's doing the exact same thing, and before I go through the trouble of jacking with it all over again, anyone got any ideas on how to completely avoid this?
Message Edited by primus on 11-05-2006 11:29 PM

powr light blinking, try first to set static ip on the pc and forced the ethernet card that you have on the pc that is connected directly to the router.. and after that try to ping the 192.168.1.1 that is the ip address of the router.. if you got replies... you can revive tha router by upgrading the firmware of the router...
have a great day...

Similar Messages

  • WRT54G resetting itself at random times

    Hi my router resets itself at random times it could be after 2 mins from the first reset,10 mins after, a few seconds after or could go the whole day without resetting itself. i have the latest version 7 firmware. i seem to notice that sometimes when someone uses our other computer that accesses the internet through it wirelessly that it happens more often but i cant really confirm. Need help on this please it really is causing alot of problems.

    In this case i think you need to Re-Flash the firmware on your Router. Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • WRT54G keeps resetting the SSID name and wireless security

    Over the past few weeks, my WRT54G (which I've had for about 18 months) has been resetting itself by changing the SSID name back to the default "linksys" and losing wireless security. I have updated the firmware.
    Any ideas of what is going on here?
    Thanks.

    After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch.  If you saved a router configuration file, DO NOT use it.
    Routers seem to be sensitive to electrical surges and noise. This can cause them to loose their settings. You should keep your router plugged into a high quality surge suppressor with EMI/RFI filtering, such as the Belkin SurgeMaster Gold Series. A surge suppressor alone is not enough because surge suppression does not start until the voltage exceeds 330 volts. Alternatively, most UPS devices have both surge suppression and EMI/RFI filtering.
    If this does not prevent your router from "forgetting" its settings, then the router is malfunctioning, and it should be replaced. A router that forgets its settings is not secure.

  • WRT54G v8 resetting randomly

    First and foremost: I'm mediocre at best when network issues are involved. 
    Apologies if this has been posted before; however, I didn't see anything similar to my issue while searching through the boards (yes, used the search function, there's no way I'd sift through 1400+ pages!). 
    Alrighty, here goes: lately, my router has been resetting itself every 2-4 minutes (at random intervals for random amounts of time) throughout the day. The constant resets have been occurring for a little over 4 months now,  pretty much since I acquired the router and updated the firmware. The reset is equivalent to a "soft" reset. My setup is a cable connection to a cable modem to the Linksys (WRT54G) router.  I must stipulate that this is not a wireless issue.
    Thanks.

    At times when your router stop's working.Did you tried to connect the modem directly to the computer and check if you are able to go online. Also, when you are not online through the router check the ip address on computer.If you have an ip address then follow the below mentioned settings.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Mid-2010 MacBook Pro Resets Itself

    I bought my 13" Macbook Pro in September of last year. Lately it has intermittently started resetting itself, meaning in the middle of whatever I'm working on, my screen will suddenly turn a light blue color, then the desktop will reload afresh, with all the applications I'd been working on previously no longer open. It seems to happen when I'm switching between programs, primarily when I'm switching back to Safari or Word, but that may just be coincidence. It's frustrating, but I haven't lost any data yet. I've run all software updates, if that makes any difference.
    Any thoughts? Thanks!

    I suppose I should have mentioned that I've been making frequent Time Machine backups and save my most important files in cloud storage. I'm certainly not averse to making a Genius Bar appointment, but I do have reservations about how much they'll be able to help given that I can't reproduce the problem at will.

  • My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    To recovery yoyr existing account:
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    If necessary:
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • HP Officejet Pro 8500A Periodically resets itself

    About every 20 minutes the screen on my HP Officejet Pro 8500A goes blank, then redisplays, followed by the carriage shifting sounding like the printer is resetting itself to print a job.  I'm set up on a WiFi connection and have no screen blanking set.  This resetting is VERY disconcerting as it happens with no warning.  How can I stop this periodic reset?
    This question was solved.
    View Solution.

    Hi HevnLgh,
    I completed all of the steps you recommended and they did not solve the problem.  However two days later the problem has disappeared.
    The problem was not that the printer was powering off.  Also it was not connected to a computer in any manner other than WiFi, though it did have a phone line connection to send/receive FAXes.  The printer display was blanking for a few seconds, followed by redisplay and carriage movement that sounded just like when it was getting ready to print.  However no printout resulted, nor was there any print job pending.
    Now the display goes dim periodically for a few seconds, but comes back on.  However there is no longer any carriage movement or other noises.  Since the sudden noise was always the annoying factor I'm satisfied that the issue is resolved.
    Hwedhlor

  • Mac OS 10.4 reset itself

    Hi,
    I was using my PowerBook G4 today like I always do. I was downloading some new icons from the apple website and I was writing a paper for school. I was pasting some of these new icons onto folders, when my customize buttons on the Finder dissappeared. I thought the computer was just having a small problem, so I restarted it.
    When I did that, the entire OS was changed. The dock was reset back to factory settings (except instead of the icons appearing, they were question marks). My iTunes library was erased, as was my iPhoto library (and all of my other applications were reset). My edits to the Finder (such as backgrounds) were set back to white, and edits inside of applications were undone (for instance, my bookmarks in Safari were reset back to factory settings).
    What happened? And is there a way to recover the settings I had put into the computer? It didn't delete my MS Word and Excel files, but it seems to have deleted or reset everything else. I have had no problems with my computer before. Nothing like this has ever happened to it before. Thanks for your help in advance.
    PowerBook G4 12.1 1.5 GHz 512 MB RAM   Mac OS X (10.4.6)  

    Update:
    After digging around more, I've found most of my files. My iTunes music is all there for instance. However, I have to reimport the files into iTunes to get them to play.
    So, my question is now... what happened? Why did my computer reset itself, but not delete my files? And how do I keep this from happening again in the future?

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • ITunes keeps resetting itself

    I got my Sony VAIO laptop just before christmas and downloaded itunes from this website onto it. But every few days it resets itself and all my music, playlists and the genius sidebar disappear. To fix it I just drag and drop all the stuff in the itunes music folder back into itunes, but it's very frustrating and I shouldn't have to do it. I never experienced this with my home computer which also operates on vista. Has anyone experienced this and is there a way to fix it?

    The Sony Media Management software is causing a conflict with itunes.
    See redkeefy's post here:
    http://discussions.apple.com/message.jspa?messageID=8515870

  • Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).

    Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
    Please Help i need this phone....and i dont have the money to replace it!

    I havent jail broken it so its probable a hardware issue then.......well then.......
    anyway thanks man
    Cheers!

  • IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

    Hi there,
    Urgent help needed!!
    Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
    Thanks in advance!!!!

    Slymm71 wrote:
    just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
    See your other post... 
    https://discussions.apple.com/message/18876037#18876037

  • Computer is resetting itself

    Hi I have a MS-6340M Ver5.0 Mainboard which I have just update the CPU to  a 2.6Ghz CPU. I have replaced the CPU fan and heat sink with one rated to 3.0Ghz.
    The problem I am having is that the computer keeps resetting itself. Sometimes on start up and sometimes when I start a program, sometime during using a program.
    I thought it was due to over heating? but still does it with new fan, are there any setting that I have not set corretly or do I have a faulty New CPU.
    Can some one help?
    Regards Navyboy.

    give us full psu details
    and vga card in it,or is it onboard vga
    Memtest86
    your ram and be sure it is pc133 not pc 100 ram

  • MacBook Pro 15" MacBookPro1,1 reset itself?

    Hi guys.
    i bought my mac on 2006. i am using it till today. However, it startsto reset itself while i amorking on applications like word excel photoshop. I couldn't understand what is the problem? Is it about software or hardware? can it be about heating or something like that? thank you all
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro1,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP11.0055.B08
    SMC Version: 1.2f10
    Sudden Motion Sensor:
    State: Enabled
    System Software Overview:
    System Version: Mac OS X 10.4.11 (8S2167)
    Kernel Version: Darwin 8.11.1
    Boot Volume: Macintosh HD

    Hi doftin, and welcome to Apple Discussions.
    I don't understand what you mean by
    It startsto reset itself while i amorking on applications like word excel photoshop.
    Please explain what actually happens.
    Do you have upwards of 15% free space on your HD? If not, this could be causing issues.
    Have you run Repair Disk? Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen go to Installer Menu>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).
    Are the temps high? Are the fans running at high speed? (download free iStat Pro)
    Message was edited by: tjk

  • Phone resets itself to January 1980

    For the past five days or so, my iPhone 5 (os 7.0.4) will arbitrarily reset itself to January 5, 1980; this happens only at home.  The phone could be charging, or not charging.  It's completely arbitrary.
    Upon a hard shutdown (home key/power off) and restart, the date and time will reset itself back to current.
    I've got a visit to the Mac store later today, but I'm curious if anyone else has had this issue, what it was and how it was solved.
    Thanks much.
    C

    I am having a similar issue with my iPhone and my son is having the exact same issues on his Droid HTC and it took me two people and nearly two hours to convince those Verizon folks it isn't the device.  I am almost certain it has to do with the local tower near our home.  My son went to work which was about 30 miles away and he didn't have one issue.  As soon as he got home, he was back at 11/15/2013 even though it was 12/14/2013.  The problem is intermittent, all of a sudden everything works and a few hours later, I can't text, receive texts, calls go directly to voicemail so if it is one of those annoying people who thinks I am just going to see their missed call and immediately call them back-well they are surprised and ticked off when I don't.  Can't call someone back when I don't know they called which is a darn shame since I use my cell 100% for work and I am self employed.  Right now it is 1:23am on 12/15/13 in California but my phone says it is 11/16/13 at 10:18am.  I tried call my cell from my landline and it goes right to voicemail.  I type a text and hit send and nothing is in the history but at some point it does go through but never shows up on the history, annoying especially when you are trying to communicate with your teen and I can't remember exactly what I wrote.  I use my phone as my watch, my alarm clock, etc. so that's an issue....  And the worst part is!!!!!!!!!!!!!!!!!  I can't play Candy Crush Saga because it says I have to wait over 42,000 minutes, thats about a month for those who are interest.  And yes, my son is having every single issue once he got home from work, including the exact date and time error I have but yet Verizon still thinks it is my device.  Really?  I was told there was a ticket established to escalate/solve this issue but I have my doubts based on my interactions and the fact it took me two hours and two people to convince it wasn't my device before they would take this issue to the next level.  The Verizon folks are getting paid for that time but I am not and I am paying Verizon.  What's wrong with this picture?

Maybe you are looking for

  • Why can't I sign into Premiere Elements 10 to use a template?

    I'm trying to select one of the templates to use for the credits of my film, but it keeps trying to get me to sign in. The signing in process begins, but it never actually signs me in or rejects me. The signing in box just remains on the screen. I've

  • How to find Tables behind a Custom Query in SAP

    Hi Gurus, Can anyone please help me find tables behind a custom query in SAP. Regards As

  • Button calls function

    Hello ,I have very simple problem as      public class chart extend Applet           draw d;           plot p;           �.           p s v main(�)           Frame f =new Frame();           �.           class draw extends Panel           chart ch1;  

  • Portal Database Docs

    Hi. I'm searching for documentation about the portal database. Diagrams, fields, tables and views descriptions, anything. There's so many tables ans views... Does somebody knows where I can find something like these ? Thanks. Donald

  • Making Screen fields Non editable in Migo

    Hi TO ALL, In MIGO T-code , aganist oubound delivery under Batch Tab i want to make fields Non editable. I am unable to find suitable exit for this,can any body help me regarding this. Thanks