WRT54GS V7 can't get my wep key

When I log into the router using 192.168.1.1 select  the wireless tab it tries to load and stops at 98%. I can not retrieve my wep key to add other devises. Will resetting to factory defaults let me get the info? I can't upgrade the firmware either. Any help is appreciated.
Solved!
Go to Solution.

Welcome to the Cisco Home Community.
Does it happen on a different browser?
Have you tried clearing your browsers cache?
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

  • I have an hp wireless d110a printer how can i get another wep key for it to set it up?

    Have a new HP d110a wireless printer how do i get or put in another key that it will take to finish setting it up to work? I need help. I had one of these before,and had to send it back, and HP sent me another one just like it. It will not take anything i put in it. How do i fix this. I went through all the steps, and it still does not take anything. Need help.

    Hi,
    Only you (or relatives) know your WEP key, it should be in your access point (AP), you can logon to it and check this out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help? Can I change my WEP key on my router?

    Hi All...
    I'm a newbie to these forums and I have a question... Can I change my WEP key on my FiOS wireless router?  (Actiontec MI424-WR Rev. D)
    My neighbor, who also watches our dog when we go on holiday, has been using my internet from his house.  He freely admitted this.  My FiOS is much faster than his throttled Comcast and since he's a power user (torrents) he frequently uses my internet connection for all his massive downloads.  His usage knocks me off PS3 and noticeably slows my internet speeds down.
    I know he has my IP and WEP since he spends weeks at a time in my house.  I'd like to change my WEP key and keep it hidden from him.  
    How can I kick him off and prevent him from hopping back on?
    Thanks in advance.
    Emma
    Solved!
    Go to Solution.

    Well... theft of services issues aside since what your neighbor is doing is illegal ...
    I agree with Justin.   Go with a WPA2 connection and use a reasonably long and complex password.    I'd change the SSID as well although that's not absolutely required.   Also make sure you change the userid/password on the router as well in case they know it.   Don't get wrapped up in hiding the SSID or turning on Mac authentication -- while they don't necessarily hurt, they don't add anything appreciable to the equation and just make your own life more difficult.
    Now ... I'm going ask, are you even using the the wireless at all?  Perhaps you are using a hardwired PC to the router and really don't need the wireless?  If so, just go into the router and turn the wireless off. Your neighbor can't steal what isn't there.
    Oh ... and it might be time to get the key back and find a new dog sitter. 

  • How to decrypt data when you can't get the private key in Windows?

    I'm very confuse. My english is poor, but I try to say my question clearly.
    When browser connects to a https website which needs client certificate to authenticate the identity, the browser will send client certificate to web server.
    Then the web server will use the certificate to encrypt some data and send it to browser.
    Then broswer should have private key to decrypt that.
    But as I know, if I install a pfx format personal certificate, I can set can't export private key, which means you can't get the private key to use it. So how can
    the browser decrypt the data without private key?
    By the way, what is CSP, use CSP's interface can we use CryptoAPI
    to decrypt data without private key?

    Answer for question is  "you cant".. 
    "How to decrypt data when you can't get the private key in Windows?"
    Read more 
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa387460(v=vs.85).aspx
    http://msdn.microsoft.com/en-us/library/windows/desktop/bb427432(v=vs.85).aspx
    http://technet.microsoft.com/en-us/library/dd277320.aspx
    http://en.wikipedia.org/wiki/Public-key_cryptography

  • I bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

    i bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

    Apple doesn't send access keys for apps. Which app was this?

  • A friend send me a gift from itunes, i fortgot my key to discharge the gift (song). Please how can I get my discharge key again?

    A friend send me a gift from itunes, i fortgot my key to discharge the gift (song). Please how can I get my discharge key again?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • HT2240 i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

    i already bought a quicktime pro version but lost the key some how. how can i get back that key, without buying a new one?

    thank you Malcolm J. Rayfield for your replay. but this didn't help, because i bought the "pro" bevore that.

  • Can't get Image Matte Key to work in PP CS6 Mac

    Hi,
    After tearing my hair and muttering adult phrases for a couple of hours while following the below instructions from the PP CS6 pdf manual, I still can't get anything but a black screen when trying to apply the Image Matte Key to a simple set-up. The project is in HD 1080p50 format and the basic editing has been largely problem free.
    Add the clip (used as a background) to a video track in a Timeline panel.
    Add the clip you want to superimpose to any track higher than the track containing the background clip. This is the clip revealed by the track matte. Be sure the superimposed clip overlaps the background clip in a Timeline panel.
    In the Effects panel, click the triangle to expand the Video Effects bin and then click the triangle to expand the Keying bin.
    Drag the Image Matte Key to the superimposed clip in a Timeline panel.
    In a Timeline panel, select the superimposed clip.
    In the Effect Controls panel, click the triangle to expand the Image Matte Key settings.
    Click the Setup button , browse to the image being used as the matte, and then click Open to select the image.
    (Optional) If you’re animating the Image Matte Key over time, make sure that the current-time indicator is in the position you want. Click the Toggle Animation icons for the settings you adjust.
    Click the Composite Using menu and choose one of the following:
    Matte Alpha Composites the clips using the alpha channel values of the image matte you selected in step 7. Matte Luma Composites the clips using the luminance values of the image matte you selected in step 7.
    What I do is:
    • I have a clip on Video 1. I want to use a hand painted luma matte made in PS CS6 for changing levels ('exposure') in an irregular area of the clip.
    • So,  I duplicate the clip on Video 2 and add an 'RGB Curves' fx for the level adjustment.
    • Then, I add the Image Matte Key to the Video 2 clip and set up the Photoshop b/w image (RGB 8 bit, 1920x1080) from my external eSATA disk containing the Project and media (step 7 above).
    • I select 'Matte Luma' (step 9) – and expect the relevant part (painted white on the matte .psd pic) of the duplicated, level adjusted clip to be superimposed on the Video 1 clip.
    • But I only get BLACK!
    I tried using Track Matte Key, with the matte pic on Video 3 – no problem, worked just as expected.
    So, what's the voodoo with Image Matte Key?
    Kind regards,
    Joachim

    Ann, Steven, Bill,
    Thank you very much for your encouragement and duplication work! Truly appreciated.
    This morning, with some fresh energy, I attacked the problem afresh and finally found the culprit(s).
    It turned out that the major problem was the Photoshop file I originally prepared as a test matte. I created the original psd through the PP File menu to automatically get the correct dimensions. For some reason, it may have got corrupted. When it didn't work and just resulted in a black image, I used it as a template, changed it and resaved it. Apparently the problem was inherited to the resaved psd:s, even though they worked fine when imported into the project and used as mattes with Track Matte.
    Go figure…
    Anyway, today I created a brand new matte file in PS CS6 and, lo and behold, Image Matte Key now worked as expected!
    Almost…
    Going back to PS, I edited my simple matte (just two black rectangles on white) and applied a rather heavy blur. I then saved (not Save as…), deleted Image Matte Key from my fx stack in PP, reinstantiated Image Matte Key and set it up with the now resaved psd.
    No blur!
    I then went back to PS, resaved my blurred matte file with a new file name and repeated the above exercise – first deleting and then reapplying Image Matte Key, setting it up with the new, blurred matte psd.
    Now I got a blurred keying effect.
    So, it seems that Image Matte Key won't 'see' a changed file – apparently it 'remembers' the first version of the file and refuses to accept the saved changes.
    I think that I've seen a post here somewhere about the same or similar problem with PP CS5 or 5.5.
    Anyway, I've learned a lot and again, thanks to you guys who chipped in!
    Kind regards,
    Joachim

  • How can I get a replacement key for my wireless keyboard?

    I have a first generation Apple Wireless Keyboard with a key that has come loose. When I enter the serial number (beginning 3374900K***) into the selfcare database, it is not recognised, which prevents me from proceeding further and finding out if I can get a replacement key.
    Should I bring the keyboard into a store, or is there any other way (online) I can get this resolved?
    Thanks.

    Hello w:
    I think an Apple store would be the best approach.
    Barry

  • How can I get the product key of my HP 250

    Hi,
    I contacted Microsoft concerning the Product key of my hp 250 G1 for activation. I have been trying to activate it since last year but I could not. Microsoft told me it Is a volume licensing key and it only showed last 5 digits of the keys. If I tried to activate my Windows it would prompt me to buy another Product key which is worth to buy another laptop. Please I need your support and assistance to get the Product keys for activation. Thank you. The Product no is: H6E14EA#ABV

    Hello  ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, here is a document on Windows 8 product key. Thanks.

  • How can I get role configuration key in an abap program?

    Hello there!
    In a abap program I would like to get which configuration key it is running.
    The idea is, our abap program will decide which instruction execute depend on the current configuration key, but, we donu2019t know how to get this information.
    Does anybody know a BAPI, BADI or something like that to do this?
    Regards,
    Laercio

    Hi,
    Threre is no standard API provided for this however you can use following code snippet do get your jobe done.
         data: LV_PROFILE type ref to IF_CRM_UI_PROFILE.
         data: LV_ROLE type string.
         LV_PROFILE = CL_CRM_UI_PROFILE=>GET_INSTANCE( ).
         if LV_PROFILE is bound.
            LV_ROLE = LV_PROFILE->GET_PROFILE( ).
         endif.   
    Now, the LV_ROLE will contain the ID of the Business Role.
    If you're interested in the role config key you might add the following lines of code.
           if LV_PROFILE is bound.
             RV_RESULT = LV_PROFILE->GET_COMPONENT_PROFILE(
                           CL_CRM_UI_PROFILE_ROLE_CONFIG=>GC_PROFILE_ID ).
           endif.

  • Can't get a hot-key assigned to a Mail submenu

    This is in 10.5.2. by the way...
    I have a sub-menu of Get New Mail called "Gmail" where I fetch email from (you guessed it) my Gmail account.
    In the keyboard shortcut panel I can't assign a key to this. Anything I set in the panel doesn't show up in the Mail sub-menu. I have tried restarting Mail after making the setting in the keyboard panel, but that doesn't help.
    Is this possible?
    Thanks,
    doug

    I have that same SSD that I've tried for the last 18 hours to get Lion installed via Network Recovery. In various spots along the download, it will error out and say "could not download all..." -- forget the rest of the sentence off the top of my head. But it basically says it can't finish downloading Lion. I currently have it on the 6th attempt after trying the partition resize trick as well as deleting and reformatting the drive too. So far I can't get the Lion download to actually finish.
    Also, the download for Lion is incredibly slow, and it's not a network connection issue. I've tried on 3 separate ISPs with a connection speed of no less than 12 Mbps and the fastest time I've seen for a completed download based on the figure within Network Recovery is 9 hours.
    I remember using Network Recovery on my mid-2011 Air to try out the (at the time) new feature and it downloaded Lion in ~3 hours max. Not sure why it's now 10+ hours for the same file I downloaded in July.

  • How can I get a replacement key for my Macbook's keyboard in a country without an Apple Store?

    I'm in Guyana, South America, and there is no Apple store in this country. I have asked my friends in North America to go to an Apple store to purchase a key, but they were told that I must ship my Macbook to an Apple store. This seems like unnecessary troubles just to get a single key.
    I had bought my Macbook Pro for no longer than 2 months when my 'H' key popped out and the clip became damaged. This is heartbreaking.
    Any recommendations?

    I would check these guys out. They have a great selection and ship worldwide
    http://www.machinaelectronics.com/store/keylab/
    P.S. they will also help you find out exactly what key mechanism you use.

  • I lost my sync key and dont have access to my other computer and dont want to lose data on server by resetting it. How can I get my sync key?

    I have tried words I usually use for passwords and they don't work. If I knew the acceptable format for the sync key, I could try others. But maybe the sync key is the same long number they originally sent me. I am in Chile and my laptop hard drive crashed and I needed to replace it. I can't access my sync key on my desktop in the United states but I want to download my syndc data to my laptop with the new hard drive but I dont have the sync key and I dont want to erase the sync data on the server by resetting the sync key.

    I'm sorry but "you should have written it down" simply isn't a good solution. Having the keys at all is a bad idea in my opinion. The keys should be stored in your account and if you authenticate with a password, it should use that key. If you can't keep your password private or secure, that's your problem. The problem with the keys is, you can't delete your account and "start over" if you so wish. What happens if your machine locks up after you sign up and you have no time to write down your key?
    You can request a new password, but can't be reminded of your key? This is nonsense. I have had no such headaches with XMarks and I'm trying to find a reason to keep using firefox sync with such an obviously user-unfriendly approach. We're humans, not machines.

  • I am trying to link our xbox and PC into our wireless network.  I am using an apple airport express and it is asking me for a WEP Key.  Where can I find my wep key?

    I am tyrying to link our xbox and PC int oour wireless network.  I am using an apple airport express and it is asking for my WEP Key.  Where do I find it?

    You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
    Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
    **Edit
    Airport does support the WEP protocol.
    Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

Maybe you are looking for