WRT54GS V7 resets when version update is required for PS3 content

Been having this problem for a while now.  the router works fine most of the time.  But when a game or firmware update is required for the PS3 and is attempting to dowload the router will cycle off and back on and the dowload can not be completed.  This only happens when the version of something requires updateing.  I can dowload PSN store content, game online w/ no problem it only happens when version updates are needed.  Can anyone please help with this?

I will check on the firmware version tonight.  I did see that in the configuration, but I am unsure how to upgrade it.  It ask me to name a config file I don't know what to do there.
I can usually get the issue to resolve after repeated attempts at downloading.  it seems to be a timing and specific type of action issue.  It only occurs when the PS3 firmware needs updating or a new patch for a game comes out.  I can download PSN content without problems.  Patches will begin to download then the router cycles off/on and dowloading can not be competed.  However with enough attempts the timing will be such that the router will cycle after accepting yes that informs of the patch, but before actual downloading begins.  then i will get the 'Please wait...." screen that occurs prior to the screen with the download progress bar.  When the route recconects it jumps to the progress screen and I can get the whole patch to download and install.  It is just frustrating as takes several attempts to get it to time this way.
I see that people are experiencning similar issues with other Linksys routers.  Was wondering if anyone knows what this only occurs with this particular function and with nothing else and how to fix. 
P.S. thanks torque for the message, I will look into those products.

Similar Messages

  • I updated my iphone4 when i updated it require the previous owner of iclouds email and password but i didn't know him because i purchased it as second hand plz help me how i can rid from it :((((((((((((((((((((

    i updated my iphone4 when i updated it require the previous owner of iclouds email and password but i didn't know him because i purchased it as second hand plz help me how i can rid from it :((((((((((((((((((((

    Welcome to the Apple community Fazypk.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

  • Do Ratings and Reviews reset when you update your published iBook in the store?

    I'm about to publish my first iBook in the iBooks Bookstore/iTunes. Am having a problem finding the answer to this question:
    Do ratings and reviews reset when you update your published iBook in the store?

    Reviews after an update are "sectioned" separately.... they do not reset to zero

  • Updated Information Required for KB: 159865

    Dear "dedicated
    team for the development issues who will be able to assist you accordingly."
    Please assist RE: 
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/updated-information-required-for-kb-159865/e74cd617-49f7-4725-b0ac-3c1cc7cbc3f7
    Steve F

    Hi Kevin! I have been unable to reply on this forum for quite a while. Unfortunately, after being advised to delete and re-create my LIVE account, by a member of a Microsoft Support team, I tried replying, but received IIS errors, then the page simply wouldn't
    display the "reply box", no matter what browser or version!
    Beyond that, I don't have much of an update. I didn't think you were serious. What would you like me to check "%windir%\inf\setupapi.dev.log"
    for, specifically? I'm asking where to find a mapping, without even knowing how the mapping is done, or what it would be logged as, if it is logged at all! 
    Asking a vague question in response to a specific question, is by no means helpful. Again, I have various certifications from various companies as a Storage Administrator, Unfortunately, I have yet to get a certification of divination in regards to the source
    code of proprietary software.
    Someone who knows what the error message means in physical reality needs to explain it, because the message itself does not refer to physical reality in any coherent
    way. It seems to refer to an abstract identifier, although, that is of course, speculation at best.

  • What are the system requirements for Adobe Content viewer?

    What are the system requirements for Adobe content viewer?

    Hi j80r59m,
    Please check the KB : http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

  • What is the exact version of JRE required for Discoverer 10.1.2.2?

    Hello,
    I understand that through Application Server Control it is possible to set whether Discoverer Plus should use "Oracle JInitiator" or "Sun Java Plug-in 1.4".
    The problem I have is that, due to immoveable restrictions in place on the workstations where Discoverer Plus the will be used, it is not possible for the browser to automatically download and install either the Sun Java Plug-In 1.4 or JInitiator to the end-user's workstation the first time the user tries to access Discoverer Plus.
    In this environment, the only way to get either JInitiator or Sun Java Plug-in 1.4 (which I assume just means the Sun JRE) onto the users' workstations is for an administrator to manually install it. So my questions are:
    1) What is the exact version of JInitiator required to run Discoverer Plus 10.1.2.2?
    2) What is the exact version of Sun JRE required to run Discoverer Plus 10.1.2.2?
    3) If the workstations already have another more recent version of Sun JRE installed, is there any way to get Discoverer Plus to use that version?
    Thanks for your help,
    Andy

    Resolved.
    For reference, see Metalink article 465234.1

  • Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

  • When will OAuth be required for Bing Ads APIs (v9)

    Hi, 
    What is the official date for when OAuth is required for the Bing Ads APIs? (We are using v9). We have a number of merchants to move over and need a date to track towards. I have heard June/July before, but would appreciate getting an exact date.
    Thanks,
    Hans
    HK

    Hello.
    This example uses the UserName and Password elements for authentication. For
    Managing User Authentication with OAuth, replace the
    UserName and Password elements with the AuthenticationToken, which is your OAuth access token.
    http://msdn.microsoft.com/en-US/library/bing-ads-reporting-request-and-download-a-keyword-performance-report-in-csharp.aspx
    I hope this helps!
    Hi Eric Urban,
    I need the same help to get the keyword performance report using Java API. I have found java sample code having the userId and password.
    As you suggested above user id and pwd will be replaced Authentication Token.
    Can you please provide the java sample code to generate the Authentication Token, which will be refreshed/renewed automatically without manual inputs? Because our utility needs to be scheduled daily once and pulls the keyword performance report.
    Thanks,
    Regards,
    Sreekanth.

  • Update Transfer requirement for partially picked Transfer Order

    Hi,
    I am looking for a functionality to update a transfer requirement for a partial picking.
    For example, we have a TR for quantity 100 pieces and we have 80 pieces in stock, so we create a TO for 80 pieces and the remaining quantity on TR would be 20. Now we dont want to pick for the rest of the 20 pieces, instead we want the TR to be updated for  the quantity which will be picked i.e 80 Pieces.
    Also, is it possible to put some kind of a rule which govern that the TR should be updated only if we are picking for atleast 80% of the quantity originally mentioned in the TR.
    Thanks in advance,
    Mike

    Hi Frenchy,
    Thanks for the answer. I have one more question.
    Is it possible to automate it based on a movement type, so that every time we create a Transfer Order for this movement type the relevant TR will be automatically marked for 'final delivery'. This would help us, because then we would not have to go to WAM everytime to mark it as complete.
    Or some kind of configuration that will dictate that only one Transfer order will be allowed for a Transfer Requirement and the TR will be set to complete as soon as the TO is confirmed.
    Thanks,
    Mike

  • Disk space required for business content activation

    Hi everyone,
    I'm looking for information about how much disk space is required for activation of differents parts of business content (or ultimately, ALL business content in NW04S). I'm also looking for that information on extractors side on R/3.
    Reason why i'm asking is that I am convinced that it is better to activate as much Biz Content as possible straight at the beginning of an implementation project even though part of it should not be used in the first place(mostly because if you activate BC later while already in production you have high risks of overwrite or conflicts with existing objects). However I am often opposed the argument that this consumes useless diskspace blah blah blah...
    I'd be curious to know the exact diskspace Biz Content actually takes when activated, so any information about it is welcome.
    Thanks!
    Christian

    iam also agreeing wih ur opinion it is better to activate as much business content  a implementaio level

  • I have an ipod that i changed my ID on it and my computer had some issues so I reset it and not my ipod reset when I updated the software and I cant find my purchases of movies and music please help

    I changed my email awhile back and have been using it fine until the other day i had to wipe my computer clean and when I downloaded the Itunes and pluged in my ipod I lost all my purchased items. where can i find them and get them back

    They would only be where you put them.
    Use your backup copy to put everything back.
    If or some reason you failed to do the basics and maintain a backup, then you can redownload purchased music in some countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You only get one download of movies.  It is your responsibility to backup your purchases.

  • What version Adobe is required for AcroPDDoc?

    I have a vb2005 program that uses the AcroPDDoc class to merge two pdf files and saves the new pdf to another name. The program then cycles through a list of the new pdf files and sends them to a network printer. I have Adobe Acrobat Standard 8.0 on my pc and the program runs great but when I try to run it on another pc with Abode 6.0 I get the following error message.
    Retrieving the COM class factory for component with CLSID{FF76CB60-2E68-101B-B02E-04021C009402} failed due to the following error: 80040154.
    What version of Adobe or SDK is required to use the AcroPDDoc class?

    Leonard,
         Thanks for getting back to me. I do have Adobe Acrobat 6.0, Acrobat Distiller 6.0, Adobe Reader 6.0 and Adobe Reader 9.0 on the pc. Should Acrobat version 6.0 run AcroPDDoc?
    Thanks,
    Tony Stancil
    ROYSTON LLC  l  www.roystonllc.com
     Please print this e-mail only if necessary.

  • Updating a dDocAccount for a content you didn't checked-in

    Hello,
    I have the RWD privileges on account A and account B.
    Imagine a content (which I didn't checked_in initially) with
    dDocAccount=A. I want to update this content with dDocAccount=B.
    An error message appears telling that I can't update my content
    because I am not the author.
    Is there a way to pass through this problem ?
    Best regards,

    The only way you can change a piece of content's security when you're NOT the original author is to have Admin rights of the SOURCE account. If you do, then you can change it to are those you have Write access to. In your situation, you can only change the account of content you checked-in.
    Keep in mind that with accounts, you'll also need to have rights to the security group. So since you need admin access, you'll need admin access to both the account (dDocAccount=B) and the security group (whatever it is).
    This is all standard security of UCM and there's no way around it unless you have admin rights. So I'm afraid the only option you have is to request for further access (or plan to hack your way into the file system, which I wouldn't recommend :P)

  • Problems when trying to return information for External Content Types in Sharepoint 2013

    This is my first post on the forum, until I tried on this problem but have not found anything.
    When trying to return the information from the external content displays the following error:
    Error retrieving data from mill. Administrators: query the server log for more information.
    I do not know what else to do...

    Hi,
    According to your post, my understanding is that you got an error when tried to return the information from the external content.
    Did the error occur when you created a new external content type or created a external list?
    You can check the steps with the following articles about how to create a external content type.
    http://lightningtools.com/bcs/creating-an-external-content-type-with-sharepoint-designer-2013/
    http://wyldesharepoint.blogspot.in/2012/12/sharepoint-2013-setting-up-external.html
    If the error occurred with the external list, you can check the steps with the following article.
    http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/01/08/how-to-create-external-data-column-in-sharepoint-2013.aspx
    You can also check the event log and ULS log to see if anything unexpected occurred.
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Detection/Monitoring of major/minor FlashPlayer version updates across all supported platforms

    Is there any API we can use to call against or is there
    another way of polling to monitor when new updates are released for
    any/all platforms that FlashPlayer is published and maintained for?
    I run a very large multinational consumer facing website with a ton
    of Flash/Flex applications deployed on it and desperately need a
    way of automating the process of making sure all of our apps work
    between version updates to the player.
    I see that in the client configuration settings for the
    player, there is a way to configure the client to check for server
    updates for itself periodically, the shortest interval being 7
    days. Is the API it calls exposed in any public way that I could
    use the same mechanism but also poll for updates for all supported
    FlashPlayer versions? I tried to detect what it was using as an
    endpoint on the Adobe.com with no success. Ideally I'd love to have
    a daemon (I write myself obviously) on my end check the version
    numbers periodically and send me messages when any of them change
    so that way I can initiate the QA and any resulting development
    updates to ensure that everything stay working nicely.

    Thanks. Being able to do this would solve a ton of problems
    for us as we get killed by version updates occasionally and I'd
    rather be able to handle this as proactively as possible as opposed
    to purely reactively. I was headed down the path of writing a cron
    job to run some CURL code to just sniff at
    http://get.adobe.com/flashplayer
    until I realized that I was going to introduce two points of future
    failure by hand-parsing the generated HTML to extract the version
    string as well as having to seed the request header since the page
    is dynamically generated based on the client browser. An external
    API or at least a supported method of getting the same information
    that I could rely on would help a TON.

Maybe you are looking for