WRT54GS wireless drop and Blinking Power-LED (V6, 1.52.5)

Hi all, Trawling several pages with people mentioning dropping wireless connectivity, I didn't notice a symptom I've noticed on mine: since the troubles started I've got the router located very close by (as in less than 3 feet/ 1 meter). One thing I happened to notice that every once in a while the Cicso loge and Power LED start blinking: connectivity is completely gone, also wired. After some time (30 sec?) the lights come on again and connectivity is restored. I haven't noticed any correlation (yet) to wireless connectivity, but it's quite irritating. Anybody any ideas?

well sounds like you have a defective device.....
tried reflashing firmware, if still not working, try calling Linksys and get an RMA #
" I can do all things through Christ which strengthens me. "

Similar Messages

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

If they are the instructions I think you might have seen, they are for the Apple TV 2.
Unfortunately I think your Apple TV may have failed.
You might try removing ALL the cables for a while and trying again, but I think you may be out of luck.

MSI K8N Neo blinking power led?

Okay.. so..
I just upgraded my system with the mobo mentioned above and an AMD Athlon 64 3200+.
I wanted to test some different some different linux systems that do 64 bits.. so, first i try gentoo and then debian-amd64 (both are text based/curses based installs).
The installs go great.. but when i finish up and install X the system halts and the power led starts flashing.
I suspect that X might be pushing my power supply to the limit (for windows users.. X is a graphical interface to linux;)
So, should i go to my store and buy a new PS?
If so, can you recommend any, or any specs of the PS?
Any replies are appreciated.

You will have to make a bootable floppy with the latest bios here is MSI web page maybe this will help you http://www.msicomputer.com/support/bios_result.asp.

My router is dead and the power led is flashing the firmw...

my router is dead and the power led is flashing the firmware is corrupt i have tried everything to fix it and i cant access the web based setup

Assign a static IP address on computer like 192.168.1.10 and see if you can ping 192.168.1.1 if yes, you can try updating firmware using tftp utility.

Qosmio X500 won't start and the power LED is blinks every 5 seconds

Hi,
I need help my X500 won't start now. I tried to start the NB as usual and suddenly the X500 wont boot or even power up.
If I press power button it doesnt make any sound, the power LED on button and the second power LED just bliks once and turns of, and keep blinking every 5 seconds.
I tried to:
* remove battery and power up with AC only
* power with battery only
* remove battery hold power button for 30 seconds and more athen power with AC only, battery only
but it didn't helped.
I checked the AC & Battery LEDs, but they are not flashing, they are just RED, so there is not proble in battery or AC.
Any idea where could be the problem?
Thanks for help
Frantisek

> {quote:title=FrankieCz wrote:}{quote}
> Hi,
> I need help my X500 won't start now. I tried to start the NB as usual and suddenly the X500 wont boot or even power up.
>
> If I press power button it doesnt make any sound, the power LED on button and the second power LED just bliks once and turns of, and keep blinking every 5 seconds.
>
> I tried to:
> * remove battery and power up with AC only
> * power with battery only
> * remove battery hold power button for 30 seconds and more athen power with AC only, battery only
>
> but it didn't helped.
>
> I checked the AC & Battery LEDs, but they are not flashing, they are just RED, so there is not proble in battery or AC.
>
> Any idea where could be the problem?
>
> Thanks for help
> Frantisek
hello FrankieCz
i have similar problem with my laptop
how do you solve it

No connection, and the power led on my router keeps blinking!!

Any help would be great!

Ok, you are not going to believe this, but I was having the same problem and now it is fixed!
First, I am no hardware guru, so for those of you who find my fix to be common sense, at least cut me some slack for trying every possible soultion :-)
First, I bought this Linksys model to replace MY EXISTING router, which I think is the W065 or something, a very good G model.
So when I hooked up the E3000, I did what evey lazy gamer does who's in a hurry.....I USED THE OLD, ALREADY CONNECTED, POWER CORD!!
Apparently, this old power cord does not provide enough power or something, because the router simply kept getting stuck in diagnostic mode (flashing power LED). it would occasionally stabalize, but only to eventually (usually inside of 5 minutes) reverting back to Diag mode and loosing all connectivity.
MORAL OF THE STORY: ONLY USE THE POWER CORD THAT SHIPPED WITH THE E3000!!
Hope this helps someone, cuz it drove me insane!!

PORTEGE T3600CT: Blinking power LED

Hi everyone (forgive me by my english).
I have a trouble whit my PORTEGE T3600CT (yes, a little bit oldie... but I love her) when its connected to the AC power supply.
It looks like an overheat of the microprocessor or something else: after a few minutes (5, 15, 30... its never the same) the computer shoots down, the power led turns orange and blinks 4 times in aprox. 5 seconds and then remains off for 3 seconds. That is the cycle: 4 blinks, 3 seconds off, 4 blinks...
I dont know what it means, cause I dont have the manual. If someone knows, please help me.
Thank you all.
Maximiliano

Hi Maxi
The service partner you can find on http://eu.computers.toshiba-europe.com under Support & Downloads.
About blinking code I can only tell you that as far as I know this kind of information is not published and you will not find any official site about it. Only thing you can do is to search some information on the net.
Bye

Kt3 Ultra Blinking Power LED

Anyone know why my power led started blinking??
It just started blinking, it was solid before.
Any help would be appreciated.
Micheal

I noticed the other day, that mine blinks too! It hasnt done that before...and i havent changed anything. And everything works as its supposed to.
Mine is a 845PE Max2

Slow Blinking Power LED

My system is pretty stable, it can run memtest and prime95 for days without a problem. but very randomly it will sometimes just completely power off but the power LED will blink very slowly. sometimes it will go months without this happening, and sometimes it will happen several times in one day. I've noticed that sometimes it happens when i bump into the system.
at first i thought something was shorting it out, like when it moved. but i carefully reinstalled the mobo and checked everything, and i can't find any problems. I can't reproduce the problem at all, so i can't seem to solve it. Any ideas appreciated.

In that you've had the board out and back in, you've checked all the obvious items like loose ide and power cables, memory is firmly seated into the slots, your case back doesn't prevent the video card from being fully seated? Those kinds of things?

E3000 blinking power LED

Hello,
Today my e3000 router just stopped working, its power LED is blinking and I cant access its setup page.
Is this fixable or is it dead?

Hi agjurich. You can try doing another reset. This time, please press and hold the reset button for 30 seconds. Release the button and unplug the router. Plug it back in and check the lights.
Another method to try would be to assign a static IP to the computer. You may assign the following:
IP address : 192.168.1.20
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 4.2.2.1 and 4.2.2.2
Once set on the computer, hardwire the same computer to the router and ping the IP address of the router.
You may check this link on how to do the ping test,
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=1c771bda3da742b687356adb9a5c9c1a_Pinging_the_Links...
If the router responds, by giving you 4 replies, then you may still be able to make it work. If it doesn't, then it's really time to buy a new one.

Blinking power led on WRT54G2 v1

I'm having a lot of problems with my new wireless router, and I could use some help. I'm on a Macbook Pro, OS 10.6.1. I bought the router two weeks ago, and it worked well for several days, until I noticed that the power light was flashing, and I couldn't connect to the internet. I unplugged the router, and the next day when I turned it back on it worked again. The power light started flashing again two days ago, and I haven't been able to get it to work again since. After checking this website, I attempted to update the firmware according to these steps: http://www6.nohold.net/Cisco/ukp.aspx?vw=1&docid=f86d36feaf7945ae83456e5112d39a14_KB4573_EN_070207_v1.xml&pid=9&slnid=8
but when I updated the firmware nothing seemed to happen. I can see the downloaded zipped file, but when I attempt to unzip it nothing happens.
I also tried to reset the router manually- it didn't seem to work. I'm unsure what steps I should be taking to get this back on track. I'm feeling very frustrated that this new piece of equipment stopped working so soon after buying it. Does anyone have any advice on how to fix this?

Are you not able to access the router's web configuration utility at 192.168.1.1? That's normally from where you would perform the firmware upgrade.
But with the router being only two week old, you should promptly return it to where you bought it for a replacement.
Message Edited by sunwatcher on 11-06-2009 06:27 AM

KT4M Backplate and Orange Power LED??

Hi
I've recently purchased a KT4m board, however it came without an MSI Stock Backplate where do I get the backplate??
Also when the machine is powered on the power LED is Orange not green as it should be how do I fix that so it is green??

The LED in my case is green but I think it's supposed to do orange when it's in standby. It was green with the old motherboard so it must be green. I modified the power LED connector so that I could plug it into either and now plugged into the two pin one it comes up green!!
I've e-mailed MSI about the backplate hope they can send me one without paying!!

Wireless dropped and I cannot reconnect.

I have a FIOS wireless router, and last night it dropped service. It had been going strong for nearly 5 months. When I tried to log back into my WIFI it did not accept my password. I have tried all of the recommendations on this site, and nothing seems to work.
Here are a couple of quirks:
The internet connection is definitely live and working.
I have a netgear internet adapter that is currently catching the wireless signal and allowing me to post on this forum.
My wifi bars say there is a connection, but if I open my network preferences it says I have a self-assigned IP address and will not be able to connect to the internet.
Any suggestions?

Thanks for the advice, I will look into it. Meanwhile I drilled a hole through the wall (beauty of wooden houses) and connected it up to the router so I've got services back.

Wireless TV connect blinking power light

I have a Wireless TV Connect. Recently the TV adapter shows a blinking POWER light. I know the LINK light will blink as it searches for the PC adapter. However, this is the power light. The LINK light for the TV adapter is always off. I didn't see any explanation of a blinking power light in the Quick Setup guide. What does a blinking power light for the TV adapter mean?

Read the technical support pages for your router model. There is an article on the blinking power light somewhere. It describes in detail how to load a new firmware to the router using tftp. Try this procedure.
If it fails try to do what I have posted here.

Blank screen on my iMac and blinking power light.

Earlier today, my 20" iMac screen went completely blank, but I could still hear the fan working, so I'm pretty sure it believes itself to be on. I tried to restart it by holding the power button down, but it idn't work. Now, I can still hear the fan working, and the power light is blinking continuously. Can anyone try and help me out?

The same thing is happening to me right now. For reference, I posted this thread as well
http://discussions.apple.com/thread.jspa?threadID=1585907&stqc=true
Did you get it fixed?

WRT54GS wireless drop and Blinking Power-LED (V6, 1.52.5)

Similar Messages

Maybe you are looking for