WRT54GS with Mac OS 10.6.8 and RCN cable modem not working
Hello,
I have a Linksys WRT54GS, version 6 with Mac OS X (version 10.6.8) hooked up to a Scientific Atlantic cable modem, with RCN as the ISP.
Recently, RCN had some network issues, and so I had to power down and reset my modem. The modem is working fine now -- no problems at all when the Mac is connected direclty to the modem.
The router's network is OK in that I can connect the Mac wirelessly to the network, but I can't connect to the internet through the router (through neither the wireless or wired connection).
I have downloaded the latest firmware update for the router, following the Linksys site instructions, but this has not helped me solve the problem.
Does anyone have any advice as to what I should do? I did call Linksys tech support on the advice of RCN, and they said that the router does appear to be working (power, WLAN, and Internet lights are on), but they would be charging me nearly the cost of a new router to fix the problem.
Any advice would be appreciated!
Since you upgraded the Router WRT54GS with the latest firmware so once reset the Router and power cycle the whole network… Then connect the Modem with Linksys Router on the Internet Port and then connect any one computer to any one of the Ethernet port on the Router [Numbered – 1, 2, 3 and 4]… Let me know the RCN connection is a DSL connection or cable connection…
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
As far as the wireless is concern:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….
Similar Messages
-
I have recently purchased a macbook pro 2011 that does not have original install discs. The macbook does not currently have an OS and internet recovery does not work. Am I able to purchase an OS like Snow Leopard that actually has a disc and install it onto this macbook?
Does your Mac meet the hardware specs for Snow Leopard?
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Allan -
Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?
@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
I Have a new mac book pro with OS X 10.9.5 and now my CS4 is Not Working anymore. It tells me to Contact Adobe Support regarding the licence - but that Seems impossible. Any idea how to solve this?
Use the web chat and just be patient.
Mylenium -
Arris Cable Modem not working with WRT54G Router
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them. Any help GREATLY appreciated!
Thanx!ok man, good new and bad news. Good news, i know what ur goin through cause i have the exact same problem. Tried a new router too (wrt54g to no avail). Bad news i have no idea how to fix it. I've tried everything. Linksys tech support hasn't emailed back after their originaly fix which did nothing. Please PM me if you get any ideas. Ps Have you noticed that when the setup page times out you can't get an ip wirelessly. Also, my temporary fix is power cycling. Somtimes it works for a few days, or sometimes a few hours.
[Mod Note: Email address removed. Get in touch through PM for details.]
Message Edited by OnnagokorO on 09-25-2007 08:45 PM -
Mac OSX 10.9 (Mavericks) and D110 PhotoSmart Scanner not working together
My HP Scanning Software for my D110 PhotoSmart printer stopped working with the upgrade on my IMac from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Help! I don't want to have to use something like VueScan and abandon HP. I really need to be able to save scanned documents to disk, and right now my scanner won't let me save scanned pages.
Hello all,
I see that you are having issues scanning in MAC OX 10.9. The problem is that there are no drivers available for the D110 for Mavericks at the moment. The first link below will bring you to another page in the forums that will show you an alternate way of scanning.
http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Problems-scanning-with-HP-printer-and-Maver...
This second link will take you to the download page for your printer. Keep checking back there to see if there are drivers available. There are still newer printers then yours that don't have drivers, so you will have to be patient.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=4023246&
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Front Row was an eligant way to access our media files (our nanny, my mom and other non mac users) found it easy. Apple TV would work but there is no DVD contol so it is out as the mac is our media server.
APPLE BRING BACK FRONT ROW!http://www.mac-hatter.com/blog/frontrowenablerforlion
Plex as a replacement for Front Row. See http://www.plexapp.com
MacBook Pro, Mac OS X (10.7.1), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0 -
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations. -
I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks
Full instructions here:
https://discussions.apple.com/thread/4540761 -
Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?
Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?
-
I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion
Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi -
I have an old Mac computer Powerbook G4 with Mac OS 10.5.8 and Safari 5.06 can I use Flash 11? Gly
I have an old Mac computer Powerbook G4 with Mac OS 10.5.8 and Safari 5.06 can I use Flash 11? Gly
OS 10.5.8 was the LAST "Universal Binary" OS that Mac released. It could be run on PPC or Intel Macs.
You can use Flash, but NOT the current version. Flash Player 10.3.183.90 is the latest version that will run with 10.5.8.
Apple ended all support for ALL PowerPC hardware and software just over four years ago, so there will be no further development of ANY apps that run with PowerPC Macs, from ANY developer. -
I have a 2010 mac book pro and track pad is not working well, is there a problem with that year?
I have a 2010 mac book pro and track pad is not working well, is there a problem with that year. I heard that the 2011's had track pad trouble.
All recent versions of Mac OS X use bash, so avoiding Mavericks won't help you with that problem (which isn't a problem for most users).
iWeb is another matter. My advise: migrate your website to Wordpress first and start thinking about upgrades later.
Maybe you are looking for
-
Java not working in Internet Explorer
I normally use another browser (Google Chrome) but need to use Internet Explorer for a particular online banking service. This service requires a Java applet. I have the current Java environment (as at 21.3.12), SE 6 Update 31. Java works in Chrome b
-
Jerky performance in iBooks widget and Animate Deployment Package
Hi folks, I'm making a interactive children's book using Edge animate as I wanted it to be full of rich interaction, animation etc. My plan is to make the whole book in Edge and then drop that Edge file into either iBooks author or Adobe DPS. When I
-
Can we call a bdc from a report program?
hi Can we call a bdc from a report program? Thanks Rama
-
F4 Help in Personnel no field at line item level
Dear All I made personnel no field mandatory at line item level. i want f4 help options at that field ,presently its not coming. advise on same. Jain
-
Folks, Hello. My Operating System is Oracle Linux 5. Database is Oracle DB 11gR1. I have tried to set up SQL*Plus in the following way: My directory: /home/myOracle/OracleDB_Home/bin SYSTEM_PASS=SYSTEM/SYSTEM export SYSTEM_PASS ./sqlplus SYSTEM/SYSTE