WRT54GS Wont support Two XBOX 360s online at the same time

Just bought new Linksys WRT54GS to support two XBOX 360s live simultaneously. Can't log both on at same time. It kicks first 360 off when second one tries to log on. How can I fix this and have both NAT types open?

I'm having the same issue. I have comcast as ISP, Linksys modem BEFCMU10 V3, going to a Linksys router WRT54GS V4, two desk tops hardwired to the router, TiVo with a wireless and two Xbox 360s with Xbox wireless adaptors. Each Xbox 360 has a different Live account, one has mine the other has my daughters. Either by itself goes live just fine but as soon as the second unit is brought on the first kicked off. If left on they will take turns dropping off from Xbox Live. One night we alternately texted/chatted from both of our Xboxs to the same third party. When he had signed off for the night and showed be "offline" on my unit my daughters unit still showed him "online" until we shut her Xbox off. In addition the NAT always seems to change. Some times its open, others it's medium or strict. This seems to be related to having one or both Xboxs on. I found an article on segmenting your network by using two wireless routers and running the Xboxes through the router closest to the modem and everything else through the second down line router. I haven't tried it yet. Anything I'm missing? Something else I should try? I've talked to the Geeks and some tell you can't so it and others tell me sure it will but they want $$. I've talked to other gamers that tell they've had two Xboxs on Live with no problem.

Similar Messages

When two Computers are online at the same time, constantly losing internet connection

I recently added a WRT160N router to my PC for a wireless Laptop elswhere in the house as well as adding a new network adapter card to my PC. When both the Laptop and the PC are online at the same time I am constantly getting booted offline and having to reset the connection, but when just the PC is on there are no prbloems and everything seems to work fine.
Any suggestions would be helpful, thanks in advance
Andy

In this case i think you need to change some settings on your Router. Follow the steps below.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Trying to get Open NAT Type on 2 Xbox 360's at the same time

After buying 3 new routers in a row trying to find a compatible router at my last house with Comcast, I finally found one that works then move to a house with Fios. I LOVE the speed... but this modem/router took our nat issue back to square one... obviously we're trying to play CoD: MW3 together, but we're both getting moderate NAT. I read a couple posts on the forums here and nobody could offer up a solution (looks like it has something to do with a NAT table that's too small or something?)
Anyway, I came up with a potential solution but it's something I've never done before, maybe someone else knows how:
I'm trying to connect my old dlink router to the actiontec router's internet connection, then have the xbox's connected to the dlink router with dhcp enabled. my theory is to make the actiontec router accept whatever traffic is coming through the dlink router, without knowing what devices are connected to the dlink router.
in this way the dlink router could potentially control the NAT between the xbox's via UPnP by itself, and the actiontec router would have the xbox live ports forwarded to the dlink router's ip address.
Am I crazy, could this work? so far I have the dlink router on a seperate subnet (192.168.0.1) while the actiontec is 192.168.1.1. the dlink router can ping machines on the actiontec router's network but not vice versa. also the dlink router cannot access the internet through the actiontec router yet. which is why i'm here. if this could work, can anyone explain how to set it up?

TallgeeseIV wrote:
After buying 3 new routers in a row trying to find a compatible router at my last house with Comcast, I finally found one that works then move to a house with Fios. I LOVE the speed... but this modem/router took our nat issue back to square one... obviously we're trying to play CoD: MW3 together, but we're both getting moderate NAT. I read a couple posts on the forums here and nobody could offer up a solution (looks like it has something to do with a NAT table that's too small or something?)
Anyway, I came up with a potential solution but it's something I've never done before, maybe someone else knows how:
I'm trying to connect my old dlink router to the actiontec router's internet connection, then have the xbox's connected to the dlink router with dhcp enabled. my theory is to make the actiontec router accept whatever traffic is coming through the dlink router, without knowing what devices are connected to the dlink router.
in this way the dlink router could potentially control the NAT between the xbox's via UPnP by itself, and the actiontec router would have the xbox live ports forwarded to the dlink router's ip address.
Am I crazy, could this work? so far I have the dlink router on a seperate subnet (192.168.0.1) while the actiontec is 192.168.1.1. the dlink router can ping machines on the actiontec router's network but not vice versa. also the dlink router cannot access the internet through the actiontec router yet. which is why i'm here. if this could work, can anyone explain how to set it up?
to get both working, you must enable uPNP on your router. If you are connecting your xboxes to your Actiontec, same rule applies. There is no way to allow two xbox's to connect with OpenNAT without uPNP.
Your best bet (if you can't move the actiontek behind your D-LINK) is to hook the two xbox's up to the Actiontec (preferable wired, but wifi should work).
I have 2 xbox's running fine with uPNP enabled. Both have OpenNAT.

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

Is there a way to work with two or more app at the same time on iPhone or iPad

Is there a way to work with two or more app at the same time on iPhone or iPad?

What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

Having two oracle clients installed at the same time

Hi, I was wondering if there is a way to have two oracle clients installed at the same time on one computer, and if there is a way to be changing the default client between the two. I need to have installed the oracle client 10g and 8 versions on the same computer, because we have a problem with a legacy application that for some reason only works with version 8, and we need the 10g because our new applications requires 8.1 or later. We are still migrating to the new system but we developers need to have the two clients. Any help is appreciated. Thanks in advance.

Is it possible, sure.
Technically, clients before 8.1.5 were not multi-home compliant, so having Oracle 8 and Oracle 10g clients on the same machine is almost certainly not supported. On the other hand, I know that a number of developers at Oracle had combinations of Oracle 7 clients Oracle 8 clients, Oracle 8i clients, and Oracle 9i clients on their development machines at the same, so you shouldn't have too many major issues.
Most "default client" issues come down to which ORACLE_HOME is first in the system's PATH. Ideally, you would leave the Oracle 8 ORACLE_HOME first in the path and explicitly reference the 10g ORACLE_HOME when configuring anything that relies on the 10g client.
Justin

How do you keep two users logged in at the same time?

How do I keep two users logged in at the same time to be able to access home sharing?

Fast User Switching in Users & Groups or Accounts preferences in Login Options.

One computer, but two user-accounts active, at the same time, in 10.6?

I'm contemplating this setup: A current generation MacPro (running SL), with two monitors. Can I have two separate user-accounts (the Admin account and one additional user-account) active and running simultaneously from the MacPro, but, of course, displayed separately to the monitor corresponding with that user-account?
Thank you!

you can have two accounts logged in at the same time via fast user switching but there is no way to display them at the same time on different monitors.

Can I connect my Mac to two separate wireless networks at the same time?

Need some assistance with some advanced wireless networking please....
Upstairs I have a D-link wireless router connected to the internet and wired to a couple of PCs. Downstairs I have a minimac linked to my hifi via an airport express. I have bought a D-Link DWL-G122 usb wifi dongle.
So I want the mini mac to connect to the airport express on one wireless network (strong signal) and to be able to connect to the internet on another network (weak signal) via the usb wifi /router.
But the airport software and the d-link driver seem to conflict and both try to take control of the two wireless devices.
Is there any way round this to be able to run one mac with two wireless network devices at the same time?
Thanks

While those with more experience may be able to correct me, I'm pretty sure that you can only connect to one wireless network at a time with your Mac Mini, unless D-Link provides their own proprietary software that bypasses the computer's Airport settings.
Using the AirPort hardware you can only connect to a single wireless network at any given time. However in this situation the 2 attempted connections are via USB and AirPort. Therefore this requires nothing special of the AirPort drivers or settings.
It does require that the Mac OS and applications have the capability to use either network connection (USB or AirPort) depending on what data they are trying to get. In general I understand how it is theoretically possible but I have no idea if you can configure OS X to do it.
...I believe one of the options when setting up the Airport Extreme Base Station is that you can extend a wireless network already in place.
True but the D-Link is not compatible with Apple's WDS therefore this is not possible in this situation.
If you have a newer Airport Extreme Base Station with a USB port on it...
FYI, every AirPort Extreme base station (AEBS) has a USB port.
BTW, birky has indicated that he/she is using an AirPort Express (AX) not an AEBS.

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

HT203167 I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them d

I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them down?

If you downloaded them on your computer's iTunes then they should have gone into the Movies part of your iTunes library, if on a device (iPad, iPhone or iPod Touch) then into the Videos app - they haven't appeared there ?
If you downloaded on your PC and they don't show in the Movies section then you could try searching for them by name (or part of their name) via windows explorer and see if that finds them. Or if you downloaded them on a device and they aren't in the Videos app then have you got a film age rating set in Settings > General > Restrictions that is hiding them, and if not can you find them via the device's spotlight search screen (swipe your first homescreen to the right) ?

Can two subVI show up at the same time?

Can two subVI show up at the same time?

Hi,
Save the vi as a template (*.vit), then you can open it (dynamically) as
often as you want. If you make the vi "floating", you get the best results.
Regards,
Wiebe.
"smal" wrote in message
news:[email protected]..
> Hi,
> What if the subvi has to be called dynamically (hence using call by
> refrence node).
> In fact I want to run a subvi each time a button is clicked
> independent of the others(it gets just some parameters from the caller
> vi & must continue running so the user can interact with it via its
> front panel )
>
> Thanks for your attention in advance.

Two Calendar Windows open at the same time?

I would like to have two calendar windows open at the same time (with different months shown). Is this possible?

Nancy,
That is not possible with the current version of iCal.
If you find a need for that feature, I would invite you to Provide iCal Feedback.
;~)

Having two background brarchive running at the same time with -f 1 options

Good morning,
I need to run two brarchive in parallel as background process.
I would like to have on for the save and one for the copy.
I need that because they would have different files.
1. Is this configuration supported or not?
As a file is created for the locking (.lock.bra) I have the feeling that a single process is supported?
2. Just to double check, can I run two brarchive with two different config file in a serial manner
(lauch the 1st one, wait for its end, launch the 2nd one, waits for its end).
3. If you are using that kind script on your systems, could you please provide them?
4. If brarchive is launched by a script how do you shut it?
Do you do just a kill of the script or do you kill it and send another signal to the brarchive if it is currently running?
Thanks in advance for your answers.

Good afternoon Eric,
> Why do you want to use option -f 1? what are the reasons being this?
-f makes it run in background.
For me, there two advantages for doing that.
1. You start it once, when you start sap, and it runs regularly
2. When you stop sap, you stop braarchive. Then you are sure that no crontab jobs are going to be started when you have stopped SAP.
> you want to stop brarchive with option -f running? try:
>
> brarchive -f stop
This is what is currently done right now.
It works well.
I can use it because we do a single copy of the archive log up to now.
We are going to run two brarchives (one to save to a tape robot with backint and one that scp).
I would like this to run as daemon.
Now, that you have answered that I can not have two brarchives running at the same time (thanks for your answer),
I need to write my own daemon in sh or perl that would do:
1. Run brarchive first run (with -p backint init<SID>.sap file)
2. Wait for the en of the brarchive process and log
3. Run brarchive second run (with -p scp/stage init<SID>.sap file)
4. Wait for the end of the brarchive process and log
5. Sleep during a few minutes
6. Handle stop signal so that it ends the forked brarchive that may be running.
I am sure that people on this forum have already wrote such scripts.
I may open another thread as it divert a little from my original question.
Thanks in advance for your help.

WRT54GS Wont support Two XBOX 360s online at the same time

Similar Messages

Maybe you are looking for