WRT54GS2 - Page taking too long to load?

Recently our Internet Service Provider turned our internet back on. About a day or two after using the internet, I've been noticing problems with slow internet connection. At times it will load fast, and other times it'll take a little bit too long to load.
For example, I had a couple tabs open this morning and tried to get on a website in a different tab. The page was taking so long to load that it gave up and I got the message "Unable to connect to the Internet".
But I have internet. 
On my taskbar, there's an icon in the bottom right corner showing that I have internet connection. 
Other times I'll try to load a page and it's just blank, and in the corner of the page's tab, there's just an icon of a white sheet of paper followed by the web title.
How come some pages are taking too long to load and others are loading just fine?
Additional detail if it helps:
I unplugged the power cord from my router and plugged it back in to try and fix it and that didn't work.
My second and third attempt, I refreshed my router. Still nothing.
Also, I have a secure network, password protected.
There have been no severe storms recently that could have messed with the router.
What can I do to fix this issue of a slow loading page?

 Hi ashtonlevry, it looks like your router has a messed  up settings right now. That could be because you had it on stand by for a while since you said that your ISP has just turned your connection back on.
It's actually best for you to just reset the device back to the default settings and reinstall it afterwards.
To do the proper reset :
1. Press and hold the reset button at the back of the router for 30 seconds while the device is on.
2. Release the button and unplug or power off the device.
 Once done, reinstall the settings.
 For Cable connection, check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
For DSL connection, here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...
To set up the wireless connection,  here's the link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=2bf7dc19b4a94d03b0fd91f9ce426e8a_Manually_Setting_...
Hope these steps help.

Similar Messages

  • We have purchased a movie on Apple TV (2) and its taking too long to load, so we want to watch movie on Itunes on the computer but can't find rented movies on the MAC

    We have purchased a movie via Apple TV (2) and its taking too long to load, so we want to watch movie on Itunes on the computer but can't find rented movies on the MAC iTunes

    Movies rented on Apple TV aren't transferable to another device. If its taking awhile to load then its an issue with your network.
    What is your speed via speedtest.net
    1080p requires 8mbps
    720p needs 6mbps
    You can change to SD in settings
    Interference can cause issues, verify via istumbler or netstumbler
    Should be using ISPs DNS (settings - network - DNS should be automatic)

  • Page takes too long to load because of videos

    Hi. I have a website that I made, but the page takes too long to load because there are videos on it. Is there any way to stop the videos from auto-loading and instead only load when someone clicks on them to play?

    There are several ways to have videos on a page without having them load until they are selected to play. A couple are:
    1 - Opening Item in a New, Precisely Sized Window. This test site has 9 videos on the page: PhotoPresenter Animated Slideshow Themes.
    2 - QT Movies via Export for Web in QT Player. This method is more difficult to implement.
    OT

  • Apple tv2 is taking too long to load movies

    My apple tv2 is taking too long to load movies, it displays a message saying it needs 200 minutes or more, what about you guys?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • R/3 Extraction taking too long to load data into BW

    HI There,
    I'm trying to extract SAP Standard extractor 0FI_AP_4 into BW, and its taking endless time.
    Even the Extract checker RSA3  is taking too long to execute the data. Dont know why its taking so long to execute.
    Since there in not much data to take such a long time.
    Enhanced the datasource with three fields from BSEG using user exits.
    Is that the reason why its taking too long? Does User Exit slows down the extraction process?
    What measures i should take to quicken the process?
    Thanks for your time
    Vandana

    Thanks for all you replies.
    Please go through the steps I've gone through :
    - Installed the Business Content and its in version 3.5
    - Changed the update rules, Transfer rules and migrated the datasource to BI 7
    - Enhanced the 0FI_AP_3 to include three fields BSEG table
    - Ran RSA3 and the new fields are showing but the loading is quite slow.
    - Commented the code and ran RSA3 and with little difference data is showing up
    - Removed the comments and ran, its fine, though it takes little more time then previous step...but data is showing up
    - Replicated the datasource into BW
    - Created the info package and started the init process (before this deleted the previous stored init process)
    - Data isn't loading and please see the error message below.
    Diagnosis
    The data request was a full update.  In this case, the corresponding table in the source system does not
    contain any data. System Response Info IDoc received with status 8. Procedure Check the data basis in the source system.
    - Checked the transformation between datasource 0FI_AP_4 and Infosource ZFI_AP_4
       and I DID NOT found the three fields which i enhanced from BSEG table in the 0FI_AP_4 datasource.
    - Replicated the datasource 0FI_AP_4 again, but no change.
    Now...I dont know whats happening here.
    When i check the datasource 0FI_AP_4 in RSA6, i can see the three new fields from BSEG.
    When i check RSA3, i can see the data getting populated with the three new fields from BSEG,
    When i check the fields in the datasource 0FI_AP_4 in BW, I can see the three new fields. It shows
    that the connection between BW and R/3 is fine, isn't it?
    Now...Can anyone please suggest me how to go forward from here?
    Thanks for your time
    Vandana

  • My macbook pro is taking too long to load

    I recently droped my macbook and had to have the hard drive replace. I just got it back, but its taking much longer to load. There is now a light blue screen first, then it swithches to another blue screen with an apple symbol with that thinking circle thing, followed by a darker blue screen with an arrow in top right corner. Then it finally loades. What is Wrong with my macbook?

    Check the Startup Disk in System Preferences and make sure your HDD is selected.
    Does this happen everytime you re-boot?

  • Taking too long to load

    I just got a refurbished iPod 4g. When I try to connect to iCloud, it says it 'cannot connect to server' and when I try to access iMessage it tries to load the country/region I am in... for a very very long time. I have not been able to get any further in these programs that the 'loading' or 'cannot connect' screen.
    Any way to fix these loading problems, or do I just have to wait it out?
    Thanks so much!

    Hi Pandiarajan,
    well I doubt you are able to speed it up (aside from taking a faster computer ).
    And you didn't say what exactly is "too long" !?
    This message only shows the last loaded item.
    Maybe LabView is busy with initializations like checking 'VISA resource names'. This may take a while (especially when scanning GPIB or other communication buses for devices) and you just have to wait for finishing this step...
    Message Edited by GerdW on 07-20-2007 10:43 AM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Help, my site is taking too long to load in Adobe Muse!

    Hi, I built my client's site in adobe muse. All images are optimized, fonts are web safe. It's pretty bare bones but it is taking long to load. When I test it it will take 15 seconds to load if at all then an hour later all links load fine. I have tested on 3 different computers, 2 different internet connections, 2 macs and one PC. Any ideas on what would cause it to fluctuate back and forth. I clear the cache and it does the same thing. The site is tanglee.com
    I would appreciate any guidance on this.
    Thank you,
    Cher

    Hi Cher
    Please refer to this links which includes similar topic :
    https://forums.adobe.com/message/5682485
    https://forums.adobe.com/message/5001153
    Thanks,
    Sanjit

  • DTP taking too long to load data

    Hello
    I want to know what performance relarted setting can we do when it comes to a DTP load. I have read some notes and most of them says that if the load is a huge volume of data then you should try increasing the Background processes of the DTP and semantic groups etc.
    What i have noticed is that each DTP is having a defaulted value of 3 as background processes. Now if i change this to 5 what can be the impact. Is it advisabe to change this.
    The DTP has transfered records 17219409 and added records 4717473. Please can somone suggest what can be other performace activities that can be checked as this load is nearly taking 4 hrs to load data to a DSO.
    Thanks

    All right Tom,
    Yes I would defiantly increase the number of background process.  This could have an impact on user performance as the more background processes you add, the more dialogue processes will be removed.
    But for instance say you do the load during the night when there are no users you can remove all dialogue processes and say have 12 background processes which should load the data faster.
    If you need to load the data during the day analyse how many dialogue processes are free in on average and adjust accordingly.
    I have found if you reduce the package size often increases data loads.
    Thanks,
    Nick.

  • Can I extend the time that Firefox waits before sending me the "problem loading page - taking too long to respond" error message?

    I can't get into a development site that colleagues in the office have no difficulty with

    what is your web page?
    what is your firefox version?
    what is your operative system?

  • Why am I getting a message that says "Page is taking too long to load"? And then it gives me a stripped down version of the page. BUT it always works fine in Safari, AND I have a 15MBPS Internet connection?

    It routinely affects the most frequent sites I visit: odesk.com, batchbook.com, google reader. They aren't bandwidth intensive sites, and as I mentioned I have a really fast internet connection. Sometimes refreshing the page helps. Other times it doesn't and I have to use Safari.

    https://discussions.apple.com/message/17862980#17862980
    https://discussions.apple.com/message/20162496#20162496
    yes. my thought was to make certain your drive is 100% in order to eliminate that persepctive

  • Why are the pages taking so long to load?

    When I connect to a page it takes a long time to load.

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  • Mac Mail taking too long to load incoming mail

    It's been taking a very long time for Mail to load my emails for the past few weeks. I tried updating to Maverick, but that did not help. I also deleted a ton of emails--didn't help. My largest inbox (I have five, but only one has many messages) is now at 50% capacity, but the problem has not lessened. The incoming mail prompt usually says something like, "Loading 110 of 125 emails," and after 15 minutes or more it will load 1-2 new messages. I don't really understand what's going on anymore--there seem to be a lot of folders, my Sent folder is showing unread emails (?). I don't know the function of Archive--tried to export all those to a folder on my harddrive so I could delete them, but that didn't work.
    Help! The constant processing is slowing down my entire system with slow payoff from Mail and is driving me nuts!

    P.S. I have had no success Rebuilding, and cannot find the Terminal application on my computer.

  • Coldfusion Page  takes too long, to Load.

    Hi All,
    I have just moved into Coldfusion technology. My expertise is
    predominantly on Oracle and PL/SQL development.
    In the application i am working on, we are currently facing,
    an issue. We have a requirement, that is handled by dynamic
    dropdowns. We use Javascript to control the values loaded in a
    dropdown. (By default, the Country, State, City, Facility and
    Facility Type for a user will be loaded. He can choose any of the
    values in the dropdown and that would control the other dropdown's.
    If a Country is chosen, the states corresponding to that country
    should be loaded in the next drop down .. and so on ... )
    We have drop downs like, Country, State, City, Facility and
    Facility Types. The backend, sends across, all the values as the
    combinations of Country,State,City, Facility and FacilityTypes that
    have been rolled out , to enable selection as a refcursor. The page
    load was surprisngly taking about 91 seconds!! We did check the
    record volumes and they are not more than 1500 rows. Also, the
    database queries, execute in 130 microseconds each. Thus, the code
    is indeed optimized from the database perspective.
    The Issue i am facing is the performance hit when the page
    loads. For just 1500 rows of the combinations i have mentioned, it
    takes 94 seconds. It takes only 24 seconds in my offshore. However,
    i have verfied machine configurations and i seem to have a better
    configuration that my offshore team. Yet, it takes more time to
    load here. Also, does the CF application server parse all the
    functions OnLoad, Onchange even before the Page is loaded? Anyone
    who has already encountered this issue?
    Cheers,
    J

    What version of CF (guessing 6.1 according to your username)?
    What database?
    What database driver?
    Is the database indexed correctly?
    Is the database local?
    Are you caching your queries, since a list of states is
    unlikely to change?
    What hardware on the server?
    Are your heap sizes optimized in the CF Administrator?

  • My custom javascript interface/dialog in photosohp is taking too long to load, draws empty window sometimes. How can I get it to wait?

    I have a long script that loads a lot of variables and icons.
    Unfortunately it sometimes just draws an empty window.
    I've been working around it by putting a break in before it draws the window, and then I step over and it displays fine.
    I've added a $.sleep of 25000, but that seems to not work too well. Not sure its doing anything.
    I've split the code into a few scripts and I've had them as one giant script. No difference.
    I'd appreciate some ideas/solutions on this topic as I'm feeling like I'm out of ideas.
    Thanks.

    There are bugs in ScriptUI that Adobe needs to fix perhaps you have run into one. I know the Paul and X have reported bugs to Adobe... Try asking in the scripting forum...Photoshop Scripting

Maybe you are looking for

  • Dynpro-PAI doesn't recognize actual selections in ALV-Control

    Hi Control-Framework-Experts, I have a Dynpro with an ALV-Grid-Control (cl_salv_table). You can mark rows. There is User-ALV-Button (cl_salv_functions_list) and a event-handler (EVENT added_function OF cl_salv_events), which find out, what rows are s

  • Itunes issues on windows 8

    I just bought a new computer with windows 8. I downloaded itunes and signed in. Initially my music played, then when I shut if off and went back, all of the songs were light gray in color and would not play. Then when I went back again, it's as if I

  • Terms of delivery width

    Hi All, how can increase Terms of delivery width in PO Header -> Texts Thanks & Regards, S.Singh

  • Why don't my videos (movies) display file names?

    I have about 20 movies on my Lumia 928, but the file names don't display.  The movies play fine, but it would be nice to know the names of the movies without having to play them.

  • JTable with more cell editors??

    Hi, I have a JTbale in which I have two special columns- one with buttons and the other similar to the the color changer from the swing tutorial. My question is should I have now two renders and two editors in this situation? Tnax