WRT54GS2 - Random Disconnect help.

I am baffled as to why my wireless internet disconnects.
It seems that after visiting certain flash sites, I will lose internet connectivity. I have no idea why. If anyone has any ideas as to why, I would greatly appreciate the help. I will provide any information I can.
It also seems to be just on my pc. I am currently able to post off of my lap top with no problems. When I lose connection it goes from connected to limited connectivity. Most of the time, I can disconnect and reconnect and it will be fine for about an hour or so when it disconnects back to limited connectivity. This will persist for about a week. Then, everything goes back to normal it seems, but I play games online persistently and it is very frustrating being disconnected mid game. Any feedback or ideas would help, thank you.

login to the Router setup page and below change the MTU size to 1350 and click on save settings, then click on the Wireless tab and change the wireless channel to 1 or 11 and click on save settings, then click on sub tab under wireless "Advance Wireless Settings" and Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Please help! iMac randomly disconnects from internet. Wi-fi via BT hub. I am baffled by all of the suggestions when I google this problem! Any simple solution? Thanks!

Please Help! My brand new imac randomly disconnects from the internet. We have a BT hub - wi-fi. I have googled this issue and see that it is relatively common and it is incredibly frustrating. sadly, I have been unable to wade through the suggestions others have had as to how to solve the problem as i have no technical knowledge and am basically baffled by the list of suggestions. Please can anyone explain why this happens and what to do? It is fairly simple to reconnect each time but it is driving me mad having to. It generally happens when the computer is asleep but sometimes in the middle of doing something. Thanks!!!!!!

What frequency, security are you running? It would have been helpful if you specified in the first post.
Did you create a new Location in System Preferences->Network pane, Location pull-down. Create a new custom named Location. Then after you create that new Location click on the 'Apply' button to save that new custom named Location. See if that helps.
Lastly a lot of people have reported that WEP in lion is problmatic and it would be better to use WPA2 if you can.

Airport Extreme 802.11g disconnects from the internet randomly. Help =(

O.K.
i have had this airport extreme (old one shaped like a dome) for about 5 years now... its been working fine until about a couple of months ago it has started to randomly disconnect me and my family from the internet. I know its not my modem or my ISP because if i connect my computer to my modem directly i get internet. Im not sure really what to do. Every time it does this, i have to restart my router and it works again. It does this at least once every day. Any idea how to fix this?
By the way: i bought a time capsule a week ago, thinking that it was time for a new router, but instead it was twice as slow and i couldn't even load a page. I've tried restarting it over and over gain and it has yet to have solved the problem. I guess I'm just getting unlucky :/

Define "router" - do you mean it works if you restart your AirPort Extreme or the modem?
Just because your modem works with your computer does not mean it's not buggy when used with an AirPort base station.
The fact that you had issues with a Time Capsule seems to confirm that.

Undocumented 'random disconnection' from manually connected wireless

I have got a USB-N13 wireless-N300 dongle.
According to 'lspci -k' I have the drivers, and I have a wireless interface. So I know that my dongle has drivers but I don't know if they work 100% well.
I will show the output of various normal commands:
$ iw dev wlp5s0u1 link
Connected to <mac address> (on wlp5s0u1)
SSID: <ssid>
freq: 2437
RX: 19939057 bytes (111695 packets)
TX: 319269 bytes (2813 packets)
signal: -50 dBm
tx bitrate: 7.2 MBit/s MCS 0 short GI
bss flags: short-slot-time
dtim period: 0
beacon int: 100
$ ip link show wlp5s0u1
3: wlp5s0u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether d8:50:e6:f4:33:24 brd ff:ff:ff:ff:ff:ff
$ dmesg -w
[ 6.634808] r8169 0000:04:00.0 enp4s0: link down
[ 6.634847] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 6.636405] rtl8192cu: MAC auto ON okay!
[ 6.648784] rtl8192cu: Tx queue select: 0x05
[ 7.006529] IPv6: ADDRCONF(NETDEV_UP): wlp5s0u1: link is not ready
[ 8.751113] wlp5s0u1: authenticate with <mac address>
[ 8.774294] wlp5s0u1: send auth to <mac address> (try 1/3)
[ 8.792882] wlp5s0u1: authenticated
[ 8.794125] wlp5s0u1: associate with <mac address> (try 1/3)
[ 8.815636] wlp5s0u1: RX AssocResp from <mac address> (capab=0x411 status=0 aid=4)
[ 8.815672] wlp5s0u1: associated
[ 8.815712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0u1: link becomes ready
[ 265.580381] type=1006 audit(1394469140.822:2): pid=253 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 265.639231] type=1006 audit(1394469140.882:3): pid=495 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 272.723778] fuse init (API version 7.22)
[ 291.938590] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 291.981059] ISOFS: changing to secondary root
[ 385.885587] hda-intel 0000:00:1b.0: Unstable LPIB (130824 >= 8192); disabling LPIB delay counting
[ 423.970540] r8169 0000:04:00.0 enp4s0: link up
[ 423.970548] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
This is all the information from when I fist see an wireless interface.
All, I can tell is that my wlp5s0u1 doesn't go down, but a few seconds before I plug in my wireless bridge, or enp4s0, my 'Internet stops...' Or I can't search google, and my youtube stops streaming, conky says that about 30bytes get transfered from that point on, and there is no errors?!
I'm not on a laptop, and my device's power saver is set to off. And as I'm not getting the second error I don't know how to fix this.
$ iw dev wlp5s0u1 get power_save
Power save: off
(Sorry if this is blatantly obvious, I've only had arch for under a month, with no prior Linux experience, and my dad can't help me with it too!)
EDIT:
Please can someone please tell me something that I can try or look into to resolve this, I have a useless dongle now, and an Internet connection that drops at least 50% of the packets.
Last edited by Peilonrayz (2014-03-12 17:18:43)

Unfortunately, join the crowd ....
Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
Intermittent WIFI with Leopard on Macbook
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
New MacBook Pro & Leopard - Airport Connection problems
http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
Airport random disconnect
http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
... that's a couple of the major threads about this issue, that has been going on since June.

IPod Classic Randomly Disconnects from Car Stereo

I have a 160GB iPod Classic that is hooked up to my car stereo. Previously it was connected to a 2012 Kia Sorento SX and it would just randomly disconnect from the stereo and freeze. The only way to get it back was to do a hard reset (menu/select button held down), then start playing a song, and then connecting to the stereo. It didn't happen frequently, but maybe once or twice a month. Annoying. But I thought it had to do with the way Kia implemented the connection to the iPpd.
I just recently acquired a 2014 Acura MDX and I've already had that same annoying problem twice in 2 days. So now I'm starting to think maybe it's the iPod.
In the past, I've done a full restore, repaired the drive, etc. Nothing seemed to help.
Any ideas? Thanks!!

Sometimes this works. Otherwise you will have to wait for an updte to the car system or the iOS on the iPod
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the car system
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Wifi randomly disconnects from my macbook pro running 10.9.2.

Wifi randomly disconnects from my macbook pro running 10.9.2. Rebooting is necessary to regain the wifi connection. The wifi power indicator indicates a full connection, but the card sees no wifi networks. I have renamed the location, deleted and reinstalled the wifi interface, moved the wifi inerface to the top, and reset the DNS. This problem is continual and occurs with all wifi spots. Please help.

It seems that the wifi on the computer shuts off and will not turn on until the computer has been rebooted. Can someone poease help?

CUCM Random disconnect errors

I have a client who is getting random disconnect errors from his cucm servers. They seem to encompass other network errors at times as well, but not always. I'm having a hard time telling if its cucm or if it is a network issue in general.
I pulled his core logs and at the time of disconnect messages from RTMT I'm seeing this:
|StationInit:   TCPPid = [1.100.9.58957]Socket Broken. DeviceName=SEP002584189723,IPAddr=10.100.7.49, Port=0xc702, Device Controller=[1,51,5397]|1,100,50,1.20646898^10.100.7.49^SEP002584189723
11:35:48.006 |StationInit:   TCPPid = [1.100.9.58948]Socket Broken. DeviceName=,IPAddr=10.101.1.42, Port=0xcbf2, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.050 |StationInit:   TCPPid = [1.100.9.58250]Socket Broken. DeviceName=,IPAddr=10.101.1.112, Port=0xc436, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.067 |StationInit:   TCPPid = [1.100.9.59376]Socket Broken. DeviceName=,IPAddr=10.101.1.16, Port=0xc55e, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.099 |StationInit:   TCPPid = [1.100.9.58840]Socket Broken. DeviceName=,IPAddr=10.101.1.8, Port=0xc577, Device Controller=[0,0,0]|1,100,55,3.1^*^*
The Cisco UP Presence Engine service on the peer node of a subcluster has failed AppID : Cisco Syslog Agent ClusterID :
|StationInit:   TCPPid = [1.100.9.58957]Socket Broken. DeviceName=SEP002584189723,IPAddr=10.100.7.49, Port=0xc702, Device Controller=[1,51,5397]|1,100,50,1.20646898^10.100.7.49^SEP002584189723
11:35:48.006 |StationInit:   TCPPid = [1.100.9.58948]Socket Broken. DeviceName=,IPAddr=10.101.1.42, Port=0xcbf2, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.050 |StationInit:   TCPPid = [1.100.9.58250]Socket Broken. DeviceName=,IPAddr=10.101.1.112, Port=0xc436, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.067 |StationInit:   TCPPid = [1.100.9.59376]Socket Broken. DeviceName=,IPAddr=10.101.1.16, Port=0xc55e, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.099 |StationInit:   TCPPid = [1.100.9.58840]Socket Broken. DeviceName=,IPAddr=10.101.1.8, Port=0xc577, Device Controller=[0,0,0]|1,100,55,3.1^*^*
and lots of them, for a few minutes and then it stops. When I search around for solutions for this I see "contact TAC" repeatedly. Can anyone help me determine if I have a cm problem or a network problem. He did reboot the cluster 12 days ago and it didn't stop the problems. The disconnect errors related to all components of the phone system (cucm, cuc, uccx, cups) and have been anything from "SDL link to remote application is out of service", "OUT-OF-SERVICE AppID : Cisco UP Presence Engine ClusterID", "
The Cisco UP Presence Engine service on the peer node of a subcluster has failed AppID : Cisco Syslog Agent ClusterID", "user 2 ntpRunningStatus.sh: Primary node NTP server, SVUCCX01, is currently inaccessible or down"
So its just like all communication breaks and then comes back again. I'd like to do as much leanring as possilble with this and not just run to TAC. Any suggestions?

Hi Dustin,
Please see the explaination for the error you are getting:-
CCM_CALLMANAGER-CALLMANAGER-1-SDLLinkOOS : SDL link to remote application is out of service Remote Application IP Address [String] Unique Link ID [String] Local Node ID [UInt] Local Application ID [Enum]Remote Node ID [UInt] Remote Application ID [Enum]
Explanation   This alarm indicates that the local Unified CM has lost communication with the remote Unified CM. This alarm usually indicates that a node has gone out of service (whether intentionally for maintenance or to install a new load for example; or unintentionally due to a service failure or connectivity failure).
Recommended Action   In the Cisco Unified Reporting tool, run a CM Cluster Overview report and check to see if all servers can communicate with the Publisher. Also check for any alarms that might have indicated a CallManager failure and take appropriate action for the indicated failure. If the node was taken out of service intentionally, bring the node back into service.
Reason Code - Enum Definitions
Enum Definitions - LocalApplicationID
Value
Definition
100
CallManager
Enum Definitions - RemoteApplicationID
Value
Definition
100
CallManager
The most common Lost communication for CallManagers could be Callmanager server hang, network problems or high CPU
You can use RTMT to monitor this.
CM servers keep a TCP connection to other servers in the cluster. When that TCP connection is broken due to network connectivity or lack of server resources, the above error is generated.
Also the sdi traces you have provided won't be useful to analyze the problem but rather please take detailed sdl traces.
If possible then take SDL detailed traces with sniffer filtering TCP port 8002 in order to find out if this is a Network problem or not.
Sometimes due to highly fragmented disk can cause heavy disk I/O utilizing all the CPU.
Was there any upgradation or migration activity was carried out in network?
Please check the server NIC and switch NIC or other NIC have the same speed/duplex settings.
Regards,
Nishant Savalia

The Wi-Fi randomly disconnects, and now it is not even available as an option in the "Network Preferences" area.

After having the MacBook Pro for about 1.5 years, the Wi-Fi randomly disconnected. Ethernet works fine, however, whenever I tried clicking "Turn Wi-Fi On", nothing happens. I have tried a SMC reset, resetting the PRAM (resetting the PRAM worked for a bit and then suddenly it didn't), and shutting down/restarting the laptop multiple times. Often times does the Wi-Fi turn back on, however it immediately disconnects after about a minute. Now I have come to a point where, in the Network Preferences area, the Wi-Fi option is not available on the list that is on the left side of the preferences. A PRAM reset solved this case, but for some reason it doesn't work anymore. I took it into a local Mac store, where they said that they would need to check if it was the Wi-Fi card that was causing the problem and would need to charge me $50 for the tech service to check it out (which is obviously what I would not do...at least if there is some way to go around this). Help.
~TheIvyX

I am also suspicious that your WiFi card may have a probelm.
Do an SMC Reset before you do anything else.
Intel-based Macs: Resetting the System Management Controller (SMC)
An appointment at the genius Bar at an Apple store is FREE, in warranty or out.
Apple only charges for services when parts are needed, and then it is a flat rate for the repair, no diagnosis fees and no surprises.

WRT54G version 6 random disconnects

I have upgraded the firmware, reset, rebooted, everything the non english speaking tech support told me. The router still randomly disconnects. The only way to fix it is to reboot it. HELP. I am a gamer, and cant have this.

LOL.... been there... done that. Modem is fine. I've sifted through these forums and the FAQ's before I made a post. All the noob steps have been done man. Trust me. I did come across somewhere else though that the newer versions of this modem are made with less memory and therefore may be a hardware issue that can't be fixed. Is this true?Message Edited by Mojofoot on 02-12-200707:40 PM

Mac Pro randomly disconnecting USB devices

Hello All,
Am hoping someone out there will be able to advise me. I have a 1TB external SATA drive connected directly to one of my Mac Pro USB ports, (that is, not via a USB hub). The Mac Pro has a habit of randomly disconnecting the drive during file transfers. It seems to particularly do it when the screen saver initiates itself. I've disabled the screen saver but unfortunately that hasn't resolved the problem. The problem itself doesn't seem to be isolated to the external USB hard drive either. The Mac has on occasions disconnected other USB devices too.
Any suggestions or ideas on what the cause of it is and how I resolve it?
Many thanks
GPJ007

Yes Grant, I've exchanged the power suppply, cables, the HUB and also the HDD and checked them on my MBP - they work fine. The only USB slot that's working fine is the one on the PCI-E Card. All internal Ports do eject the USB HDD's and also have problem with Printercommunication. I can mount the USB HDD without Problem, until I want to access a larger File or transfer data from or to it, then it ejects itself - well after freezing the Computer for 5min first, until the unmount message appear.
By the way: Sorry, was a bit frustrated. I'm working as an Freelance Editor and really need to have a working USB. But the only thing I found were a huge amount of questions to the same problem, but no solution. And from apple side the only advice was to not use third party device or use only powered HDD's and HUB's. That's not really helpful...
GPJ007: Ok, I hoped to not have to make a new Setup of the OS and all the program. Well in a few weeks there is a gap in the order chain, I'm going to reinstall the OS then and let you know about sucess or not.
Thanks in advance

Sporadic random disconnects this week, very bad to...

I've never had any problems with BT Home 2.0 until this week, I have moved nothing about in my room nor adjusted any settings on the hub and my PC. I have changed the filter and still the same problems occur. I've noticed a lot CRC /HEC errors on the up stream... I live in Bristol if that might help to solve the problem. Maybe something next door could be affecting the line or a BT engineer has messed around with something on the exchange? (I am using a wired connection BTW). Any help and suggestions appreciated, thanks, Rob.
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:10:20
Downstream
9,727 Kbps
Upstream
636 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
7.5 dB / 8.5 dB
Line attenuation (Down/Up)
33.5 dB / 18.4 dB
Output power (Down/Up)
21.0 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 208
CRC Errors (Down/Up)
44 / 2147480000
HEC Errors (Down/Up)
nil / 566812
Error Seconds (Local)
39
TCP/IP settings
Broadband network IP address
81.151.168.20
Default gateway
217.32.141.33
Primary DNS
194.74.65.68
Secondary DNS
194.72.0.114
C:\Users\Robin>tracert 217.32.141.33
Tracing route to 217.32.141.33 over a maximum of 30 hops
1    94 ms    98 ms    99 ms BThomehub.home [192.168.1.254]
2    16 ms    16 ms    16 ms 217.32.141.33
3    18 ms    18 ms    33 ms 217.32.141.78
4    16 ms    16 ms    15 ms 217.32.141.33
Trace complete.

Sorry I can't offer any magic suggestions.   I had been getting regular disconnects for some months and even though I was keeping the router continuoulsy powered to avoid loss of line synchronisation it still was occurring.   See my comments in the thread "Re: Disconnects on Accessing HH and Random Disconnects at Night" for 10 Feb.
The Forum Moderators were very helpful and responded to my queries and arranged four visits from OpenReach to try and sort out the problem.    Eventually they decided that there was a fault in the exchange boards and made some change. Subsequently I kept the router powered up until the 13 May to make sure there was no synchronisation interrupts.   The line eventually stabilised at 14,336 kbps.   It has remained at that even with my logical disconnects at night from the HH Home Page.
I found from a search back in Jan as reported in the thread "Re: HH Type B Energy Consumption & Switching Off the Router" , that the Type A software version was 8.1.H.J. I don't know if it has been upgraded since.   I have found for my Type B that when received it back in Oct 2010 the ver was 4.7.5.1.83.3.5. and it is now ....83.3.18.   - when it was changed/upgraded I don't know.
As I say, although I still get random disconnects, it doesn't seem to affect my line rate.   Not sure if it is noise on the line (i have made a quiet line check and that is OK) as the Noise Margin is ca 7.6-9.1dB. I get disconnects sometimes when I try to look at the ADSL Settings, etc., having typed in the password for access. I have just looked at my Events Log and there have been a number of disconnects today since the router was logically connected at 14:04 this afternoon; 5 in total I think!   And the rate is still shown as 14,336 kbps.
Jun 3 21:29:30 2011    (26713.110000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 18:26:16 2011    (15719.410000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:25:47 2011    ERR 2011-06-03T17:25:47Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:25:46 2011    (15688.810000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:25:46 2011    (15688.740000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 18:06:05 2011    (14507.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:05:35 2011    ERR 2011-06-03T17:05:35Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:05:34 2011    (14476.950000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:05:34 2011    (14476.890000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 15:03:16 2011    ( 3538.970000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 15:02:48 2011    ERR 2011-06-03T14:02:48Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 15:02:46 2011    ( 3508.470000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:34:10 2011    ( 1793.130000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:33:41 2011    ERR 2011-06-03T13:33:41Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:33:40 2011    ( 1763.120000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:33:40 2011    ( 1763.070000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:06:16 2011    ( 119.040000) WGET: Error connecting to host https://pbthdm.bt.motive.com/cwmpWeb/CPEMgt (66.193.112.93:443)
Jun 3 14:05:44 2011    ( 109.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:05:39 2011    ( 104.560000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 14:04:43 2011    ERR 2003-01-01T00:00:27Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:04:39 2011    ( 44.450000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:04:39 2011    ( 44.380000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:04:23 2011    ( 28.920000) DVA started
Jun 3 14:04:23 2011    ( 28.170000) sys_if_stats_reset failed for atm0
Having said that your rate is quite reasonable and unless you are playing games or watching videos perhaps the interrupts will not be serious.   We only use it for email, family history, ebay and browsing so it is not really noticeable.
Rodney Fry

WAP321 random disconnecting clients

Hi all,
I'm having problems with my WAP321 that is randomly disconnecting clients. It's not disconnecting all clients, but just a couple of clients. It's random which clients get disconnected and it can be different clients that will be disconnected when it happens a couple times, but they do get disconnected at the same time.
My setup:
Cisco ASA5505
|
Cisco WAP321
|
Cisco 7925 phone - iPhone - Macbook - three IP cam's (different brands) - and some more clients
Last time it occurred I just for sure changed DHCP server from Cisco ASA5505 to two windows servers, now it happened again, my 7925 started beeping (enabled SSID monitoring on it so it alerts when it isn't connected to my Callmanager) and my iPhone couldn't connect to the SSID. My Macbook was still just connected. Retrieved a diagnostics report and checked the logging, rebooted the WAP321 and everything started connecting again.
Noticed screens are scaled so hope it's readable...
The MAC address is my iphone. I turned off the 7925 because the beeping was annoying so no logging from the 7925 trying to connect.
Logging is saying:
assoc request from [mac] BSSID [bssid] SSID LEVELS
STA [mac] deauthed from BSSID [bssid] reason 3: STA is leaving IBSS or ESS
There is nothing wrong with the coverage, the WAP321 is about ten feet from the iPhone and Cisco 7925 phone
Can anybody help me how to best troubleshoot this issue. I'm not familiar with the troubleshoot/debug options available for the WAP321

Dear Wesley,
Thank you for reaching the Small Business Support Community.
There is an opened caveat on the latest firmware release, version 1.0.4.2; CSCue24521:
-Symptom: Some clients may lose wireless connection when authenticating via Captive portal.
-Workaround: Reconnect wireless devices.
If this is not the case I'd like to know if you have tried using a different IEEE 802.11 standard, same as a different authentication type. If you are not running the latest firmware release I then suggest you to, and something else I've seen from experience that fixes similar issues is to reset to factory conditions and reconfigure manually.
http://software.cisco.com/download/release.html?mdfid=284152656&softwareid=282463166&release=1.0.1.10
I hope you find this information helpful and please do not hesitate to reach me back of there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Apple TV Randomly Disconnects From iTunes While Streaming Videos

Hey All,
Anyone having an issue where your Apple TV randomly disconnects from your iTunes on another computer while streaming videos from it? Randomly, on different shows and movies, I have had it do it quite a few times.
In the beginning, after it would disconnect, within a few seconds, it would reconnect to iTunes and then I would have to navigate back to what I was watching and and resume it. Now, it will disconnect, and then I will have to quit iTunes on my iMac and then start it up again.
I am curious if it is an issue with the wireless adapter on the ATV because when it happens, it looks like it losses complete connection with the iTunes and then reconnects to the net only after. Then I would need to restart iTunes on my iMac to continue watching my show.
This was happening before the recent update and continues after the update as well.
Any suggestions are appreciated. Thanks!

You're talking about those WIFI bridges they make for xbox 360s that connect the 360 ethernet to a wifi adapter, bridging it?
That is a possible solution, but I will definitely check with Apple first, hoping it will be a no money solution (I am a grad student, every dollar helps).
My apartment is two rooms, my iMac being in another room, so that wouldn't work. The Wifi extender will probably be my only hope if Apple is not cool with the helping a brother out.

Why does Firefox randomly disconnect my tabbed windows into their own window?

I use tabbed browsing in my Firefox, since up grading to Firefox 18 it will occasionally, at random, disconnect a tab from the group. There doesn't seem to be a pattern and I am not telling it to separate the tab from the group.

Hi DHarbour60, 
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: This will cause you to lose any Extensions, Open websites, and some Preferences.
 
To Reset Firefox do the following:
 
* Go to Firefox > Help > Troubleshooting Information.
* Click the "Reset Firefox" button.
* Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
* Bulleted list itemFirefox will open with all factory defaults applied.
 
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
 
Did this fix your problems? Please report back to us!

WRT54GS2 - Random Disconnect help.

Similar Messages

Maybe you are looking for