Wrt54Gv5 and Palm T3/Palmone Wifi card

I finally decided to upgrade my router and bought the wrt54gv5. When I connected it yesterday, I found that I couldn't access it via LELA, but I did configure it manually. Today I've updated the firmware to the latest release and now can access it via LELA!
Anyway, my Palm reports no signal if I try to connect to the router in Infrastructure mode. In Ad-hoc mode, it connects fine and gets a random IP address and can't access the net (as one would expect).
As the Palm is my only wifi device, I don't know if the problem is with the Palm or the router. Any suggestions, other than buying a dongle for the laptop so it can also talk wifi?

yes, and double checked the keys on the two devices match. Also set up MAC screening and configured the router to only accept keyed devices.
The Palm only supports WEP, so any additional security is good! Turned off SES as well.

Similar Messages

How do I see the model and manufacturer of my wifi card?

how do I see the model and manufacturer of my wifi card?
MacBook Pro 13-2011

Shootist007 wrote:
That is not correct. Apple really doesn't build any parts. They are all made by some other manufacturer and then installed in Mac computers as Add-on cards or soldered onto the motherboard, Apple Speak Logic board, before it is installed in the computer.
As to the WiFi card Broadcom makes most of the chips and they are then soldered onto a Duaghter card that is then inserted in a socket. The socket for the WiFi card is near the back of the system just behind the Superdrive. That is on the standard MBP. On the Retina models I'm not sure where it is placed.
Strebsjig wrote:
As far as I know, Apple only uses their own AirPort 'cards' (they aren't really cards anymore, but integrated chips). So the manufacturer is Apple, and the model is just AirPort.
Technically, you are correct. The original manufacturer is Broadcom, but all the WiFi chips Apple is using are rebranded as Apple, Inc. AirPort Extreme.

Tungsten T3 with PalmOne WiFi Card & Email

I recently bought the PalmOne Wi-Fi card for my T3. I managed to connect to my home network which is a Linksys WRT54G, and did connect with the internet. Now I'm trying to manage my email account with the T3. It is programmed in order to email from the T3 through cradle synchronization and works fine. I unchecked that part and believe I've got everything set. However I keep getting the following message: "ERR [AUTH] invalid user/password".
So the first question is; Can email be sent from the T3 with a WiFi card? If so, what am I missing. Thanks in advance. Frans
Post relates to: Tungsten T3
This question was solved.
View Solution.

After checking everything over, I tried to send mail from my desktop to see if I could receive mail on my T3. That worked fine. I could not send a reply back. Here are my settings in the T3.
Under account setup:
Mail Service: Other
Protocol: POP
Synchronize Only Account: Unchecked
Username: Complete Email Address
Password: Assigned
Incoming Mail Server: pop.att.yahoo.com
Outgoing Mail Server: smtp.att.yahoo.com
Under Incoming Mail Options
"Get unread mail ONLY: Checked
"Delete Messages on the server when they are deleted in VersaMail: Unchecked
"Leave mail on server (e.g. to view on the desktop later.): Checked
Port Number: 995
"Use Secure Connection (SSL): Checked
Maximum Message Size: 10 KB
Under "Advanced Outgoing Options
Port Number: 465
"My server requires authentication (ESMTP): Checked
Username: Complete email address
Password: Assigned
Under Preferences (General Tab)
GET "Subject Only"
Ask Every Time: Checked
Confirm Deletions: Checked
Delete Msgs on Server: Unchecked
Download Attachments: Checked
Preferences (Advanced Tab)
Enable Smart Addressing: Checked
Auto-Empty Mail from Trash: Checked
Timeout: 30 Secs
Auto disconnect: Unchecked
Disconnect on Exit: Checked
Modem Wait: 0 secs
Preferences (System Tab)
Backup ALL Databases: Checked
So with these setting, the end tab I get is "Connecting to SMTP server", whci stays for approximately 30 seconds. After that it states it was unable to send this message. No response from SMTP Server.
So I'm stuck from here-on. Any ideas or suggestions would be appreciated. Thanks! Frans
Post relates to: Tungsten T3

Palmone wifi card with palm zire72

completly lost dont no where to go to make this work any help would be nice i guess its not like a plug and play device haha
Post relates to: Zire 72

Sounds like you need the drivers, here is a link on where to download them: http://kb.palm.com/wps/portal/kb/na/wireless/palmwificard/unlocked/solutions/article/15202_en.html

Does anyone know where I can get a palmone wifi card?

please help
Post relates to: Tungsten E2

Hi.. Welcome to the Palm forums. Im sure you can find them on Ebay. Try a google search, Amazon probably has them as well.
Post relates to: Centro (Sprint)

Aironet 350 and palm m500 w/bluetooth card installed

Does anyone have any documentation/tech info on how to setup the Aironet 350 to support Bluetooth?

Please refer to the link for the doc-
https://books.google.co.in/books?id=5x7T7eTyAdQC&pg=PA262&lpg=PA262&dq=how+to+setup+the+Aironet+350+to+support+Bluetooth&source=bl&ots=YQmkn3aJ80&sig=g3fobt-AIZmasjDCHZzRQCetemA&hl=en&sa=X&ei=4yG3VNraJYaWuASJ3IHYCA&ved=0CCsQ6AEwAg#v=onepage&q=how%20to%20setup%20the%20Aironet%20350%20to%20support%20Bluetooth&f=false

WiFi Card with Tungsten EH

I just received a PalmOne WiFi card for my Tungsten E2 for Fathers Day and was trying to set it up. I have been very unsuccessful. I have internet capabilities at home and at the office on my PC. I have WiFi capabilities with my laptop at work which allows me to take it anywhere in the building and stay connect to our network and all our application. I do not have a media network plan for my cell phone, but it is capable, I just don't subscribe. Do I need to add the data plan from my service provider (AT&T Wireless) in order for my WiFi card to work/connect to the internet or can it connect to free WiFi networks on it's own?
Post relates to: Palm Pilot

A cell plan has nothing to do with the Wifi card...
Have you viewed the help file at the top of the BlueTooth and Wifi section of the forum? It explains the basic settings needed to connect. I wrote it for the TX, but it's applicable to the Wifi card too.
Do you know the passwords and encryption settings at work? Have you tried entering them into the Wifi card's settings? Are they broadcasting in /b or mixed mode?
What isn't working at home? Do you have your all your router's settings entered correctly into the E2?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Wifi Card for my 700wx

I need a Wifi card my my 700wx, can you help me
Post relates to: Treo 700wx (Verizon)

Just an FYI - Palm ceased selling Wifi cards a long time ago. The 700wx wasn't listed as supported either.
Try checking treocentral for compatible cards.
http://store.treocentral.com/spectec-wifi-card-80211b/59A60A1169A1.htm
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Wifi card replacement

Would you please help me!
I have a compaq presario cq56-207SG notebook pc. I have installed a new intel wifi card
(model: 7260HMW), which does not function (wlan modul ID702 error). The old one was also from intel. Besides having updated the intel and hp drivers, the wifi card still does not function.
How do I solve this problem? How do I get rid of the hp whitelist?
THANK YOU!!!operating system windows 7#64

You cannot get rid of the whitelist I am very sorry to say. It is coded into the BIOS and the BIOS is protected against modification.

Lenovo G555 Wifi card replace

hello from greece.
i have bought lenovo g555 with amd ati 4550 gpu card and i need to change my wifi card adapter.
as i know the bios is locked and i can't put other wifi card than the lenovo has put on.
what i can do to unlock the bios and put a better wifi card than broadcom.??

can someone tell me what i have to do?
i need the laptop to work and the external usb wifi isn't they way i want to use on the laptop.....what kind of card may i have to use ?????

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Ralink RT3290 802.11bgn Wifi Card - Possible Issues [SOLVED]

Dear Lucky owners of such a card, At least from my experience I realized it is not that bad card, even if most probably many production pieces were faulty or not working properly, and many issues can be resolved. Let me list in order of time the issues I faced and solved about this wifi card: 0) First issue is not about RT3290 card itself but it is related to 802.11w encryption compatibility in between Windows8 and Cisco not allowing 802.11n speed rates so failing to G speeds only. - SOLUTIONS: a. As first test I would recommend trying another router from different brand to see if connecting at 802.11n speed rates b. If you prove point a issue, then try to fix the issue based on following post (in which you can see the reply from myself Emanuele on the 29th of Nov 2014): https://supportforums.cisco.com/document/113836/windows-8-clients-cant-associate-cisco-unified-wireless 1) Signal strenght issue: original wifi card RT3290 installed on my HP laptop was having really bad antenna, with signal fluctuating and sometimes bad even really close to any Router I tried. - SOLUTION: Replace the RT3290 card even with same new card. (In my case as laptop was under warranty, I proved the issue via screenshots and they replaced with new card solving my signal strenght issue). 2) Original issue (1) was actually resolved after HP replaced the wifi card with same model, but with the latest driver installed 5.0.45 seems like wifi rates change too frequently based on high sensitivity of the driver itself, so that suggested me issue was still there, so making me re-testing anything from scratch. - SOLUTION: Install 5.0.37 Driver - frequent rate changes issue (with driver 5.0.45) disappears and sensitivity of signal to rate changes seems to be a really good compromise to have good throughput. 3) To check out 2nd issue above I started again using a third party software inSSIDer free version to check signal while I was doing speedtest on web.
- RESOLUTION:
inSSIDer normally works on Windows7 without any issue but on Windows8 (at least tested with RT3290) I have just discovered somehow this software was slowing down wifi card performance drastically showing a speed up to 0.1Mbps rather than 40Mbps. Simply closing the application issue was not recurring, so uninstalled it and after solving all the other issues above this card works perfectly (at least so far ) Hope this post will be informative and will help other about-to-get-mad guys as me

Hye. After I read up your solutions, I am quite impressive and really want to try out those solutions. However, I am not very computer wise and I really appreciate if you make a video on solving this problem. Up to you if you want to upload it on the youtube (so that others with similar problem can view it and solve the problem too) or you want to direct email to me ( [email protected] ). I really hope you can help me because I am stuck with this problem since last year. Thank you!!!

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

[SOLVED] Problem with Networkmanager and two WiFi cards

I have two WiFi cards, one onboard my laptop, one USB. I use the USB one since gets a stronger signal, but the other one tries to connect.
Is there a way of stoping that.
I don't want to cancel the possibility of using it, just when I plug the USB antenna.
Thank you
Last edited by Frezeeer (2013-02-10 20:41:24)

progandy wrote:Is there an entry for your onboard wifi in rfkill? Then block it when pluggin in the usb stick and unblock it lateron.
Thanks for the reply.
This is what I get:
$ rfkill list
0: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: samsung-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
4: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
If I try to "block" either number 2 or number 4. The WiFi disconects. It's as if they were the same card.
Any ideas?
Once again thank you

I have a dv4-2180us and I want to change out the wifi card for one w/ bluetooth and 5G

Product name dv4-2180US. My wifi card is intel wifi link 1000 BGB, and I'd like to switch it out to an intel 6230 that has both. Is it possible to modify the BIOS? I have upgraded my BIOS to the most recent 55454 hoping that would correct the problems with the keyboard...which it has not...but I'm far more interested in making full use of my network., Thanks.

I can tell you that you need to make sure the form factor is the same on the new as the existing one.
The bios really has no bearing on it. Its hardware thats compatible with hardware.
Parts like that are not readily available to swap from machine to machine. There are standards for which the card interfaces to the machine and thats why I mentioned the form factor of the card.
Physical dimensions are also to be noted, as some cards are larger than others with the same form factor.
You really have to do your homework and research to see what will work.
Your machine may already have a slot availble for a bluetooth board, or fingerprint reader as those are both viable options.
You are not likely going to get bluetooth and wireless n on the same card anyways. I would suggest looking for a dual band wireless n card and seeing if you have another slot to put a blutooth module into.
Another option is to get a type 2 cardslot module and just insert it when you need it. If your machine has this type of external cardslot it may be your cheapest option.

Wrt54Gv5 and Palm T3/Palmone Wifi card

Similar Messages

Maybe you are looking for