WRT54GX SRX router hangs intermittently

I bought the WRT54GX SRX router two months ago. The router always hang and needs to be power on and off to get it connected again.
WRT54GX SRX
firmware version 2.00.14
Setting for the router is
wireless channel = 11
wireless mode = mixed.
I read from some post that SSID broadcast needs to be turn on. Mine is currently off. I do not think that this is a problem. Will the folks at linksys comment on this?
Thanks
I would appreciate some help. Thanks

Microsoft recommends that you do not configure access points as non-broadcast (hidden) networks; by default Wireless SSID Broadcasting is enabled.
I searched Microsoft Knowledgebase for "SSID Broadcasting" and found the articles below (and others) about problems than can arise when you disable this setting... (details at link below)
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=40721#M40721
Lilla
Message Edited by Lilla on 05-11-200707:08 PM
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

Similar Messages

CSCup97267 - RV220W Router hangs intermittently and sometimes reboots

Really, are you serious?? The only fix is to reboot the router, and there are no plans to fix the problem? I would not be expecting that kind of answer from a world class vendor. Come on Cisco, you can do better than that.

Sorry Winston these articles you have the posted links to, don't help as they are all wifi related and my ATV is connected over Ethernet cable, direct into my Netgear gigabit router model wndr3700.
I have not had the problems with the ATV until the last couple of firmware updates and other devices on my network are working fine (both wired and wireless connections) have no issues. Everything works and streams fine but randomly and every now and then when navigating around the ATV interface the thing just suddenly freezes and then appears to reboot... It only happens now and then and in different places. It particularly happens if I keep pressing the remotes up/down/left/right navigation buttons several times in quick succession.
It's like the interface is trying to catch up with my key presses, approx 3 or 4 presses in a row and the ATV gives up and reboots. That's the best way I can describe it. Like I say it has only occurred since the last couple of updates.... Prior to that the interface was quick and smooth and quick navigation was not a problem.

Synchronization hangs intermittently

Hi,
The synchronization of a couple of Analysis Services databases hangs intermittently. They generally hang on Thursday which is when there is a relatively heavy load on the servers. However the servers are high spec so there is not a high load percentage usage
of resources on CPU / memory and disk IO. The databases being synced which hang are around 15Gb in size.
I am also not able to receive any error messages.
Any help would be greatly appreciated.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Sorry that your New Year is getting off to such a bad start. Freezing can have many causes, and unfortunately the logic board can be one of them. Other possibilities may be a dying hard drive and software corruption.
Unfortunately, when I had logic board problems, it was definitely heat related. It would freeze after 15-20 minutes. If I set up a fan, it would go about twice that long.
Do you still have the original hard drive? If so, it may be getting long in the tooth. Here is a utility that you can download and run several times for free:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
This utility will give you more insight into the S.M.A.R.T. status of your hard drive than Disk Utility will.
What does the iBook do when booted from a disc? If it still slows and freezes, that would point to the logic board, as you are essentially bypassing the hard drive and the OS.
If you want to exert pressure on the logic board, here is an article that might help to apply it at the right point:
http://www.coreyarnold.org/ibook/
Finally, to eliminate all possibility of a software cause, you might want to try reinstalling the OS.
It would probably be prudent to back up all your data if you haven't already and keep it backed up. Until your iBook is diagnosed and fixed, there is always the danger that it could die at any time.
Sorry to not be able to be more encouraging.
Good luck!

OSX hanging intermittently

I recently bought a new 13" MacBook Pro 2.53GHz, I haven't even had it a month yet. I'm having a problem where the OS will hang intermittently. Let me explain.
I first noticed the problem when playing videos back with quicktime. All of a sudden playback would seem to stop even though I hadn't pressed pause. If I tried to click anywhere the computer would become unresponsive and I would get the spinning beachball (though I could still move the mouse). After up to a minute playback would resume but skipped forward, as if it had remained playing during the hang.
This doesn't just happen with quicktime is running. I've noticed I seem to be "allowed" one more click before the system hangs. I've tried to use this to my advantage by bringing up Activity Monitor, but I can't see any unresponsive or out of control processes. I've also noticed that if something is playing in iTunes, it continues playing throughout the hang.
Finally, when the hang is over, the system seems to play catch up, carrying out all the commands and mouse clicks I made during the hang.
This happens a few times a day. Hangs last up to about a minute. It's incredibly frustrating and I'm not sure how to go about fixing the problem. I've run a hardware test from the OSX disc and everything seems to be fine. Any suggestions would be greatly appreciated.
Cheers

HI and Welcome to Apple Discussions...
Might be a good idea to boot from your install disk and check the hard drive just in case.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open look at the bottom of the window. You will see Capacity and Available. Make sure you always have a minimum of 10% free disk space.
If you cannot boot from your install disk, try booting in Safe Mode
Carolyn

After most recent update, Firefox keep hanging intermittently with "Not Responding".

After the most recent update, my Firefox browser begins to hang intermittently with "Not Responding". I have checked the extensions and plug-in like Java, all of them are the latest updated ones. Everytime I open a new site or click on links to load another page, it happens. Every single time.

'''is there a solution ''(temporary OR permanent)'' for this problem yet?'''
i tried '''EVERY possible alternative'''; even when opened in ''''''safe mode'''''' or when installed for the first time w| '''NO addons or ANYthing else''' but the '''original default settings''', still does the same thing.
mozilla people?? really?? no answer|feedback|suggestions, anything at all from u guys??
if it isnt a version (browser, OS, addons, etc) issue, what is it that separates us from the users not having the problem?
this is is very frustrating; h|e it's even more frustrating when there is no response from tech support. is it because there havent been enough people who have reported this same issue so there can be some interest & find a fix; OR is it that u dont know; OR that there is not & will not be any fix?
we cant continue being users if we cannot use it. it's really my favorite browser, but if it doesn't work & u guys dont have a fix for it, then users w| this same problem wont have any other option but to switch to a different browser permanently.
really mozilla??? nothing? a reply would be very nice...

Router hangs every day

Hi
I have cisco 2951 router having 2mbps(WAN) serial link & internal lan connected to gigabit interface L2-switch(Primary) having approx 150 users,
Every day i have to restart router atleast once a day, somtimes thrice a day.
I have just default route towards wan link.
when router hangs internal lan pings perfectly. but router gateway not . After restart everthing works smoothly.
what will cause this problem ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Does your default route direct to next hop IP or to the interface? If the latter, ARP table can fill causing issues. So also if the latter, change to the former.

Citrix the screens hang intermittently

We have an Oracle 9205 database running on Windows 2003 server.
We are web deploying our application using Oracle9IAS 10222; we are using the forms listener servlet including Developer6i Patch 16. The version of Jinitiator is 1.3.1.17.
When deploying this via Citrix the screens hang intermittently and users are forced to log out of citrix and log back in. Interestingly Oracle Financial's is running fine on the same box.
Pls, do let me know how to resolve this issue
Rgds,
Satya

The use of Citrix or any terminal emulation software with Forms is not supported. In most cases, it is determined that the cause of these types of problems are the result of the emulation software (Citrix in your case) and not Oracle Forms. It is recommended that you retest in a non-Citrix environment. If the problem is no longer reproducible you should then contact the Citrix vendor.
To be a valid, supported Forms user (client) the client machine must have a browser and Jintiator (JRE) install on their local machine. It is also required that the browser cache and JRE cache are stored locally.
Ref. Metalink Doc ID# 68047.1

FDB hangs intermittently and needs to be killed

Hey,
Do you guys have any idea what may cause this issue?
Sometimes when you publish a project, the debugger says it is ready, and Flash Player 10 is running, but its window never appears. When trying to compile again, the OS reports that the SWF file is locked.
The problem does not occur with Flash Player 9, but I have been able to repeat this issue with every version of Flash Player 10, using the external debug player on Windows. It happens intermittently so it is very hard to track down.
For what I know, Java (running mxmlc/fcsh/fdb) gets hung up. It sometimes starts working again if you kill every instance of FlashPlayer.exe ... ending the current debug session. It also starts to work if you kill every instance of Java.exe and try again.
I have not seen this issue when debugging by hand. The issue appears to be with the combination of Java and the Flash 10 player, and I have the feeling that it occurs because of something happening too quickly. Yes, I am using FlashDevelop, but it should not matter. FlashDevelop compiles the SWF, copies the result to the target directory, starts the debugger, then launches the external player when the debugger is ready. It offers the same commands I give the debugger by hand, so maybe Flash Player 10 has some kind of "warm up" period which sometimes gets the best of the debugger. Either way, FlashDevelop launches FDB, waits for the prompt, and offers commands.
Does Flex Builder use the same apps as the Flex SDK? Perhaps it does not occur because FlashDevelop runs faster. The problem is more likely to occur with bigger, more complicated files. Perhaps Flash Player 10 loads up, reports itself as ready, but still has to load up code. If for some reason this initialization stage takes a frame too long, FDB tries to talk to it as if it were ready, but its come through just too soon.
You can see more details about this here:
http://www.flashdevelop.org/community/viewtopic.php?f=6&t=4707
It's been over two years since I started having this issue. I stuck with Flash Player 9 for a long time because of it. Now that I use Flash Player 10 for all my projects, it feels like its time to try and figure out what's going on here. It's easy to pass the buck and say its a FlashDevelop problem, but that really is not what I am seeing ... and if FlashDevelop had to do something different, like add an artificial pause to wait for Flash Player to initialize, it would at least be helpful to know what needs to be done to negotiate the debugger without hanging it.
I appreciate your help and I don't mean to come across as confrontational if I sound that way. I'm just hoping to get down to a real answer and not assume that this is "just the way things are"
Thank you!

I have a few thoughts. For one thing, reading through the thread over on flashdevelop.org, some (and perhaps all) of the problems people encountered were due to a bug in the Flash player, which was fixed this past summer. (The Flash Builder record of the bug is here: http://bugs.adobe.com/jira/browse/FB-16153 -- but the bug was actually in the player.)
So please make sure you have the latest debugger version of the Flash player. You can get the latest version here: http://www.adobe.com/support/flashplayer/downloads.html
That is almost certainly the cause of the "WARNING: The Player that you are using does not support all fdb commands" message that member "elyon" described in his post on June 4, 2009. Hopefully it will help with whatever problems you are running into.
In another post that same day, elyon saw this output from FDB:
Adobe fdb (Flash Player Debugger) [build 4852]
Copyright (c) 2004-2007 Adobe, Inc. All rights reserved.
Waiting for Player to connect
Player connected; session starting.
Unexpected error while processing command.
For diagnostic purposes stack trace follows:
But apparently there was no stack after that message. If you can reproduce that error message, the way to get stack dumps to appear is to pass "-Dtrace.error=true" to Java when it launches FDB. This is a Java property, so it must be passed as an argument to Java, not to FDB. For example, if launching FDB from the command line, you can launch it like this:
java -Dtrace.error=true fdb.jar
> Does Flex Builder use the same apps as the Flex SDK?
Yes, but not in quite the same way FlashDevelop does. FDB has a public Java API that can be called by any Java app to control debugging, and that's what Flex Builder does, unlike FlashDevelop's approach. So, FlashDevelop and Flex Builder are using the exact same underlying debugger code; it's possible that there is some sort of problem with FlashDevelop's communication over the pipe, I just don't know.
You say you haven't seen this issue when "debugging by hand" -- you mean when using FDB directly? If so, then I suppose the Flash player version isn't the problem. I'd be interested to see a repro case that involved just FDB (perhaps reading commands from a file or a pipe if that's the easiest way to reproduce it).
There is nothing unusual about FDB's communication with stdin and stdout, it's pretty standard stuff. Also, it's all open source, http://opensource.adobe.com, so you can debug it if you want.
- Mike Morearty
Flash Builder team

After installing Adobe Flash Player Plugin to view videos on youtube, mozilla gets hangs intermittently. Please help

I installed Firefox 23.0.1 and after that It asked me to install Flash Player Plugin to view videos on Youtbe. I installed Flash Player 11 Plugin and since then Mozilla started hanging/freezing intermittently. It hangs on those websites also where videos are not running.
I uninstalled Flash Player 11 Plugin and it works smoothly without it.
Please help

This is some standard guidance that addresses the most common reasons for Flash problems in Firefox:
(1) Make sure all recorders/downloaders that interact with Flash media are as up-to-date as possible, or disable them.
(2) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode (Windows Vista/7/8)
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

C application hangs intermittently on invoking Closehandle() function in Win 7 64bit OS

Hi,
I have a application which basically deals with network operations like begin session, send/receive etc. The application also has mutex create, request and close. Before terminating the transaction between the client and server, there is a call to Closehandle()
while clears that mutex that was created during initialization. (Mutex is released prior to close). During closing the mutex, in Windows 7 64 bit OS, the application goes to hung state intermittently. The same application used work without any issues in Win
XP.
PS: The C application is written in Visual Studio 6.0
Hence requesting for any thoughts to resolve this problem!!
Thanks in Advance!

Hi,
When application hangs, it needs to be restarted. Yes, this problems happens sometimes.
With respect to the anti-virus and firewalls, I had tried turned off firewalls and anti-virus but did not help!
This application basically acts as a network layer which is the bridge between client and server.
Below is the code snippet from the app which shows about mutex creation, request and close. I had configured ADPlus to the application to check on which line of the code the hang occurs and from that dump file could notice that the cause for the hang is
Closehandle() function.
Code snippet -
typedef unsigned long OSLMUTEXSEM;
extern OSLMUTEXSEM gsemCrypt;
void PASInitialize() {
char * pMutexSemName;
DWORD NTRC;
pMutexSemName = gsemCrypt;
oslRc = MutexSemCreate((char*)NULL,&gsemCrypt)); //Mutex creation by calling CreateMutex() function
oslRc = MutexSemRequest( gsemCrypt, SEM_WAIT_FOREEVER); //Request the semaphore by calling WaitForSingleObject() function -infinite //timeout
// some operation
oslRC = MutexSemRelease( gsemCrypt )); // release the mutex by calling ReleaseMutex function
void PASTerminate(){
oslRC = MutexSemClose(gsemCrypt); //calling Closehandle()function to close the mutex
WSACleanup();
From the dump files, it was noticed that the hang happens at the call MutexSemClose(..) function which in turn calls windows function Closehandle().

Hangs intermittently

Happy New Year, everyone, from frosty Scotland. Mine's off to a lousy start. My four-year-old iBook G4 (OSX 10.3.9) has started freezing up on me, intermittently. Sometimes a reboot works (although it soon ends in tears); other times I end up at a blue screen. There's plenty of free disk space. I've reset the PRAM and run the disk first-aid. I've booted from the system disks. I've also had a good look on here for similar problems - have I fallen victim to the infamous logic board fault? Applying a c-clamp doesn't make much difference - the iBook hangs with or without clamping (although I'm not entirely sure I'm clamping where I should be).
The machine seems to work best when it's cold; I put in a good two-hour stint tonight before it started to act up. Anything?

Sorry that your New Year is getting off to such a bad start. Freezing can have many causes, and unfortunately the logic board can be one of them. Other possibilities may be a dying hard drive and software corruption.
Unfortunately, when I had logic board problems, it was definitely heat related. It would freeze after 15-20 minutes. If I set up a fan, it would go about twice that long.
Do you still have the original hard drive? If so, it may be getting long in the tooth. Here is a utility that you can download and run several times for free:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
This utility will give you more insight into the S.M.A.R.T. status of your hard drive than Disk Utility will.
What does the iBook do when booted from a disc? If it still slows and freezes, that would point to the logic board, as you are essentially bypassing the hard drive and the OS.
If you want to exert pressure on the logic board, here is an article that might help to apply it at the right point:
http://www.coreyarnold.org/ibook/
Finally, to eliminate all possibility of a software cause, you might want to try reinstalling the OS.
It would probably be prudent to back up all your data if you haven't already and keep it backed up. Until your iBook is diagnosed and fixed, there is always the danger that it could die at any time.
Sorry to not be able to be more encouraging.
Good luck!

Essbase Server Hangs Intermittently - Urgent pls Help

Essbase Version - 9.3.3
Shared Services - 9.3.3
Enviroment - Windows Server 2003
We are in the process of migrating the users from Domain A to Domain B
There are around 15000 users across the board, out of which I assume there are around 250 users accessing the Hyperion Application.
Since the Domain Migration was started, We encountered Essbase Server freezes Intermittently.
Essbase Server goes down for about 10-15 Minutes and automatically comes back. No Error Msg in the Essbase Log.
Active Directory Migration was put on Hold because business had to complete their Month end Activities.
While we were working to find the RCA and identified that few users who were migrated from Domain A to Domain B appeared to be on Both the Domain and we figured out that it might be one of the reason for Essbase Server Hangs.
We had a Plan to Run the Update native Directory Utility to clear the Stale Data
Post Performing the Action our system was stable and didn't had system Hangs.
we also changed the shared services Cache refresh Interval to 24 Hrs in CSS.xml File ( Just to Make sure the Refresh happens Overnight)
Since the Active Directory Team had resumed their Migration Activies, we started Experiencing the System Hangs Issues again. server goes down for 5-10 min and comes back up
Please Input your Valuable Thoughts, Would Really Appreciate your Help.
Thanks in Advance.

Hi,
Thanks for your prompt response.
As mentioned, AD team have the filters on place, There is no issues with the User Access and there was no change in password after migrating the Domain.
I have checked the Display Session through Maxl and there is No heavy sessions.
As Stated earlier, we are unable to identify the cause regarding the System Freeze. All users access the application all of sudden essbase server hangs and it doesn't allow user to retrieve the data, nor allow him to access any application within Essbase and Planning.
After 5-10 Min, server automatically comes back.
Can you tell me if there is a way to track the system Hangs through Essbase Log without getting the any inputs from the users.
Assuming if the users sessions are heavy what makes the server hang and automatically resumes without intervention.
Shared Services Security Log display the following Error, Can you tell me if you had come across any such errors before.
com.hyperion.css.spi.impl.msad.MSADCacheUpdater.updateUserCache(Ljavax.naming.directory.DirContext;Lcom.hyperion.css.common.CSSNodeImpl;Ljava.lang.String;Ljava.lang.String;Lcom.hyperion.css.datastructures.ProviderCacheMap;Ljava.util.Map;)V(Unknown Source) - Ignoring User. Error getting User for User Cache:[LDAP: error code 32 - 0000208D: NameErr: DSID-031522C9, problem 2001 (NO_OBJECT), data 0, best match of:
'OU=USMigrate,OU=Add_Audit,OU=Users,OU=Accounts,OU=RAC-IOC,DC=us,DC=ricoh,DC=ds'
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: Unable to load certificate from keystore or unable to locate keystore: SAP.keystore Error Code: 9
NestedException:
com.hyperion.css.common.configuration.CSSConfigurationException: No certificates present for SAP Authentication to take place Error Code: 9
at com.hyperion.css.SAPSecurity.loadKeyStoreWithSAPCertificate(Ljava.util.ResourceBundle;Ljava.security.KeyStore;Ljava.lang.ClassLoader;)Ljava.security.KeyStore;(Unknown Source)
Please advise.
Thanks in Advance.

SQLDeveloper hangs intermittently

I have been using SQL Developer for several years now and I have never experience a version which did not have issues with hanging and many times requiring me to kill the process.
I was very excited to see version 4.0 however I still have issues with intermittent hanging sessions.
Does anyone know if this is a windows issue, java issue, poor connection management....???
cheers,
j-e

Apparently the PL/SQL was padded out to 256 chars per line
This caused the JVM to run out of memory.
Unfortunately, I automatically assumed this was SQL developer hanging up.
What PL/SQL are you talking about? You didn't mention what you were actually doing when it hung up.

WRT54G hangs intermittently

IE7 and Firefox both hang and freeze at times. Clicking a link gets me nowhere...just sits there. I have tried all recommended troubleshooting steps for both. Nothing seems to work. I checked the system event log and found this error message:
"Unable to add the interface {B8340E93-170F-4121-9D5C-94CCA9037223} with the Router Manager for the IP protocol. The following error occurred: Cannot complete this function." Is this a problem with the router? If so, how do I correct the problem. Took me over 15 minutes just to get registered at Linksys site due to freeze and hang. I have WRT54G V 8.
I hope someone can help me.

Are you getting the problem on the hardwired computer or on the wireless computer...?
Have you tried different computer..?
If you are getting the same problem on wired as well as on the wireless computer then,try to reset the router for 30 seconds and reconfigure it from the scratch...If you still face the problem then,try to upgrade the firmware,reset the router and reconfigure it from the scratch.

Too many dialogs get stuck on CPIC stopped,SAP hangs intermittently on prod

Hi All,
I'm having a problem with a production system in which users started complaining about getting the hourglass cursor intermittently, and this is happening from multiple different locations / networks. Around the time the problem occurs, SM66 shows many dialog processes in status "Stopped CPIC". The processes are from different users and processes.
I've checked the workprocess trace files, made sure there was no memory bottleneck with the gateway profile params, checked System log and oracle alert log, but cannot find any clues.
Could anyone please suggest some other places to look for clues or possible suggestions?
Thanks!
Ian
System info
Netweaver 7.0, ECC 6.0
Oracle 10.2.0.4.0
AIX 5.3

Thanks for all your comments (points given).
The problem and solution was very interesting.
1. We found that an external AS400 system that communicates with SAP was somehow sending the IP address in EBCDIC format, which looks like strange characters. We saw the strange characters in the Gateway NI/Hostname buffer. During each hang situation, we saw these special characters in the Gateway trace file. The Gateway was attempting to resolve the IP address for the strange EBCDIC characters, but the EBCDIC characters were actually the IP address itself when converted from EBCDIC to ASCII.
2. As per SAP, we added the strange character hostname/IP to the /etc/hosts file with the correct IP, and the hangs stopped happening.
3. After these 60 second hangs stopped happening, we were still getting 10 second hangs every 3 hours.
4. SAP found that the Gateway logging option was causing the 10 second hangs.
5. SAP is working on a kernel fix so that the Gateway doesn't hang in these situation. We have the workaround in place for the time being.
Thanks,
Ian

WRT54GX SRX router hangs intermittently

Similar Messages

Maybe you are looking for